PTM HL Series Bedienungsanleitung

believing in technology

Rev. 02A del 23/09/2020 Translation from the Original

INSTRUCTION

MANUAL

HL SERIES

20 – 25 – 30 – 50

PTM srl

Via per Isorella, 22/A

250 0 VISANO -BS- ITALY

Tel. 0039 030/9952733

Fax. 0039 030/99528 8

e-mail: ptm@ptmsrl.com

web: www.ptmsrl.com

HL Series – Instructions manual

INDEX

FUNCTIONS ................................................................................................................................................................. 3

TECHNICAL FEATURES ............................................................................................................................................. 4

MULTILINK ACCESSORIES ........................................................................................................................................ 4

WHAT IS THE WEIGHING INDICATOR COMPOSED OF? ....................................................................................... 5

KEYS FUNCTIONS ...................................................................................................................................................... 6

TEXT AND NUMBER INSERTION ............................................................................................................................... 7

PRINCIPAL PROGRAMMATION MODALITY .............................................................................................................. 8

TO START .................................................................................................................................................................... 9

MAIN MENU ...............................................................................................................................................................

SUBMENU .................................................................................................................................................................. 2

WORK MODALITY HL-SERIES 30 AND hl-series 50 ............................................................................................... 6

TOPCUT TIMES IN DETAIL (ONLY FOR HL SERIES 30-50) ................................................................................... 20

HL-SERIES 25 WORK MODALITY ............................................................................................................................ 2

HL-SERIES 20 WORK MODALITY ............................................................................................................................ 23

VOLUME VISUALIZATION (ONLY FOR HL-SERIES 20).......................................................................................... 24

USER CODES MENU ................................................................................................................................................ 25

PRINTING EXAMPLES .............................................................................................................................................. 3

OPTIONALS ............................................................................................................................................................... 32

FOR NEW ORDERS USE MULTILINK ACCESSORIES ONLYCONNECTORS PLAN ............................................ 32

TROUBLE SHOOTING ............................................................................................................................................... 34

HL Series – Instructions manual

FUNCTIONS

HL Series 20

 Total weight visualization

 Partial weight visualization

 Available divisions -2-5- 0-20kg

 Modify of the measurement system function (es. da Kg a Lb)

 Calibration and weight zeroing function

 Possibility to connect the Multilink as TR60/70, DRIVE8, printer, etc…

 Integrated hour counter

 Overload control system

 Total weight local/unlock function

 Multilanguage

 Weight/volume conversion

 4-20mA Output (Optional)

 Automatic activation of warranty after some hours of function

HL Series 25

 All the HL Series 20 functions (NO WEIGHT-VOLUME CONVERSION)

 Managing of only one load

 Managing of only one unload

 Load and unload lock function

 Total weight lock and unlock function

 Possibility to connect the alarm

 Pre alarm at the 85% of the load/unload operations

 Settable alarm time at the end of the load/unload

HL Series 30 / HL Series 30 TOPCUT

 All the HL Series 20 function (NO WEIGHT-VOLUME CONVERSION)

 5 Recipes

 5 Components per recipe

 5 Unloads per recipe

 Animals, totals or percentage programming

 TOPCUT* function (with DRIVE8)

 Settable mixing time

 Possibility to name components and recipes

 Warehouse managing

 Load and unload lock function

 Total weight lock and unlock function

 Possibility to connect the alarm

 Pre alarm at the 85% of the load/unload operations

 Settable alarm time at the end of the load/unload

HL Series 50 / HL Series 50 TOPCUT

 All the HL Series 20 function (NO WEIGHT-VOLUME CONVERSION)

 50 Recipes

 30 Components per recipe

 30 Unloads per recipe

 Animals, totals or percentage programming

 TOPCUT* function (with DRIVE8)

 Settable mixing time

 Possibility to name components and recipes

 Warehouse managing

 Load and unload lock function

 Total weight lock and unlock function

 Possibility to connect the alarm

 Pre alarm at the 85% of the load/unload operations

 Settable alarm time at the end of the load/unload

*TOPCUT: Device used to control knives for the product decompression inside the mixer wagon at personalised

time intervals.

HL Series – Instructions manual

TECHNICAL FEATURES

MULTILIN ACCESSORIES

Repeater Display: AV4 – Big Display

Portable Display: AV50 - AV60 - AV70 - AV80

TR60 Multilink: RF Antenna for Handheld Display AV50 - AV60 - AV80

TR70 Multilink: RF Antenna for Handheld Display AV70

Drive 8 Multilink: I/O Board

RF7 Multilink: RF Antenna for radio control

Multilink Mod. P 000 Printer

Inverter Power supply

Plug power supply

NOTA: All the HL-Series weight indicators, can be compatible with some previous generation accessories.

High

sensibility membrane keyboard

Die

cast aluminium case

Protection: IP 68 with connected connectors

Dimensions : L 230 X H 80 X P 65 mm

Weight: 800 grams ca.

Display: LCD with FSTN technology transflective, led backlit.

Dimension H 80 x 58 mm.

Made by 5 alphanumeric digits (English flag) of H 47mm and a mold of 78 x 28 pixel.

High visible Display both with few illuminations and under sunlight.

Memory: non-volatile Eeprom

Clock/ Calendar

Programmable divisions: Kg. – 2 – 5 – 0 - 20

Resolution: 35.000 dd

Working conditions: - 20 + 70 C°

Relative humidity:95 %

Power supply: da 9 a 32 V dc

Absorbed power: 2,5 VA max (without connected load cells)

Load cells in parallel connection: Max 2 (350 Ω)

Load cell power supply: 5 Vcc

Reading error:

+/- Kg. on Kg. 0.000

Display data field: +99999 ; -99999

Measuring range:

± 2 mV; ± 20 mV

Reading speed per second: 0 / sec.

Serial output:

fixed; 2 optional; RS485 optional

Consumption: 80mA a 2V (with no load cells connected)

Alarm output

Protection against radiofrequency interferences

Elimination of power supply interferences

Signalling of low tension

HL Series – Instructions manual

WHAT IS THE WEIGHING INDICATOR

COMPOSED OF?

. Display: graphic Display in which is visualized the information of the weight indicator and where all the

different phases of the weighing operations are indicated. In order to facilitate the end user utilization, the

weighing indicator has an intuitive, easy and interactive graphic.

2. eys: In this part of the weight indicator there are the switch on/switch off keys, the function keys, the

direction keys, the confirmation key, the exit key and the menu key.

3. Connectors: there are the connectors for the power supply and the Multilink accessories connection.

4. Vent valve: Valve used for the compensation of the pressure caused by change of temperature and

humidity.

5. Male mounting plate: mounting place. In equipment with the weighing system there is also the female

mounting plate.

6. Serial number: serial number of the weighing indicator. In case of technical assistance, please

communicate this number to PTM or to the authorized retailer in order to permit the product identification.

7. Identification plate: weighing indicator identification plate. In case of technical assistance, please

communicate this number to PTM or to the authorized retailer in order to permit the product identification.

Please do not remove or damage the identification plate.

3 3 3

HL Series – Instructions manual

EYS FUNCTIONS

 SWITCH ON

 SWITCH OFF

 CONFIRM THE OPERATION

 ESC

 ACCESS TO THE PRINCIPAL MENU

 ADVANCED PARAMETERS

 MOVEMENT OF THE CURSOR UP

 SELECT RECIPE

 MOVE TO THE NEXT COMPONENT

 GO TO NEXT UNLOAD

 . . .

 MOVEMENT OF THE CURSOR DOWN

 SELECT RECIPE

 GO TO PREVIOUS COMPONENT

 GO TO PREVIOUS UNLOAD

 . . .

 FUNCTION EY 1

 FUNCTION EY 2

 FUNCTION EY 3

 FUNCTION EY 4

 FUNCTION EY 5

 FUNCTION EY 6

 FUNCTION EY 7

 FUNCTION EY 8

NOT : Depending on the menu where you are, some keys (for example the function keys) may have extra

functions or different functions from the ones in the chart. For more information please go ahead reading

this manual.

HL Series – Instructions manual

TEXT AND NUMBER INSERTION

HOW TO USE THE EYBOARD

 To insert numbers and text use function keys from to .

 To scroll characters groups, use keys in circular way.

 To insert accented/special vowels press for some seconds the function keys

from to in correspondence of the desired entry.

 By pressing the key it is possible to modify the kind of writing in capital

letters, lowercase letter, numbers and special characters.

 By pressing  it is possible to go back to standard characters

writing.

 To delete the last inserted character, press key  .

 To delete all the inserted characters, press key  .

 To confirm the insertion of characters, press key .

 To leave without confirming the characters insertion, press key .

If the weighing indicator is in Russian language, it is displayed the representation of

characters in Russian.

MENUMENU

HL Series – Instructions manual

PRINCIPAL PROGRAMMATION MODALITY

With the HL-Series 30 e HL-Series 50 weighing indicators it is possible to program the recipes with the doses of

components to load for ANIMAL (ANIMAL MODALIT ) or for TOTAL (TOTAL MODALIT ).

The unloading quantity can be calculated for ANIMAL (ANIMAL MODALIT ) or for TOTAL (TOTAL MODALIT ).

ANIMAL MODALITY (LOAD/UNLOAD)

In this modality the recipe is programmed by setting:

 The loading components quantity as ration of a single animal

 The number of animals for each loading group

The weighing indicator will calculate the total quantity of loading components and the ration for each unloading

group.

TOTAL MODALITY (LOAD/UNLOAD)

In this modality the recipe is programmed by setting:

 The total amount of components to load

 The ration for each unloading group.

P RC NTAG MODALITY (LOAD/UNLOAD)

In this mode the recipe is programmed by setting:

 The total amount of components to load

 The ration for each unloading group.

THE WOR ING MODALITY OF THE WEIGHING COMPUTER IS SET BY THE CONSTRUCTOR.

NOTE: In this manual are given the explanation about the weighing computer settings, programming and use in

ANIMAL/ANIMAL MODALIT .

HL Series – Instructions manual

TO START

The operations below are the basic functioning operations for the HL-Series 30 e HL-Series 50.

If you want more information about HL Series weighing indicator functioning and the work modalities, please

continue reading this document.

SWITCH ON /SWITCH OFF

Press

to switch on the weighing indicator.

Press to switch off the weighing indicator.

HellO

HellOHellO

HellO

TOTAL WEIGHT

Screen description:

1. State icon: total weight/partial weight/alarm Multilink accessories (optional)/TOPCUT (optional)

2. Measurement unity used by the weighing computer

3. Current screenshot indication (total weight/partial weight) /recipe name (only for weighing indicators with that

functionality)

4. Total or partial weight value detected by the weighing indicator

5. Number of the recipe actually selected

6. Zeroing tare key

7. Partial weight key

8. Weight lock key

9. Recipe programming key (only for weighing indicators with that functionality)

10. Start of the loading operation key (only for weighing indicators with that functionality)

11. Start of the unloading operation key (only for weighing indicators with that functionality)

12.

Print key

(op

tional

)

TOTAL WEIGHT 



 ZEROING

Press (F2) for about 3 seconds, then confirm with

Otherwise to null the zeroing.

1000

10001000

1000

HL Series – Instructions manual

TOTAL WEIGHT 



 PARTIAL WEIGHT

Press (F3) to move to partial weight.

The singular components can be changed manually. This operation can be executed

for more one time by pressing the key after each loaded component.

Press (F2) or to go back to total weight.

500

500500

500

WEIGHT LOC

Press (F4) to lock the visualized weight on the weighing indicator. The

visualized weight will be visualized intermittently and an acoustic signal will indicate

the weight lock presence. Press the key (F4) to unlock the weight.

100

100100

1000

VISUALIZATION CURRENT RECIPE NAME

ONLY FOR HL Series 30-50

Press on the total weight menu in order to visualize the current recipe name.

NOTE: for more detailed information see the session WORK MODALIT FOR

HL SERIES 30 AND HL SERIES 50

1000

10001000

1000

DATA PRINT (OPTIONAL)

Press (F8) to print the total or partial weight data depending on the menu in which you are.

NOTE: only with Printer Multilink P1000 and Code 81 habilitated.

TOPCUT (OPTIONAL)

ONLY FOR HL Series 30-50

Press the key (F ) to activate the TOPCUT from total weight.

If you set AUTO the knifes will move in and out as set on the current recipe.

If set on MAN the user should move manually in and out the knifes by pressing the key F each time you want to move

in/out the knifes.

NOTE: only with accessory Multilink Drive8 and Code 34 habilitated,

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PTM Zubehör Handbücher

PTM

PTM ADVANCE SUPER USB Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung