Pulsar 5250B Bedienungsanleitung

5250B

฀฀฀฀฀฀฀฀Topic฀฀฀฀฀฀฀฀Page฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀Safety฀GuidelinesGuidelines฀฀฀฀฀฀฀฀฀฀4฀฀฀฀฀฀฀฀Generaaal฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀3

฀฀฀฀฀฀฀฀฀฀฀฀29alPrecautionsGeneralPartsOperationInspection,฀Cleaning฀and฀MaintenanceInstallationWiring฀฀฀฀iagram฀฀฀roubles฀฀ootingT h

General฀Parts฀ListingD

Specifications2

5250W Generator

Table of Contents

Safety Guidelines - Definitions

This manual contains important information that you need to know and

understand in order to protect YOUR SAFETY and to PREVENT

EQUIPMENT PROBLEMS. The following symbols help you recognize this

information. Please read the manual and pay attention to these sections.

Save These Important Safety Instructions!

Read and understand all of these safety instructions. Be

sure to retain them for future use.

WARNING! WARNINGS INDICATE A CERTAINTY OR STRONG

POSSIBILITY OF PERSONAL INJURY OR DEATH IF

INSTRUCTIONS ARE NOT FOLLOWED.

CAUTION: CAUTIONS INDICATE A POSSIBILITY OF

EQUIPMENT DAMAGE IF INSTRUCTIONS ARE NOT

FOLLOWED.

NOTE: NOTES GIVE HELPFUL INFORMATION

WARNING! IMPROPER OPERATION OR MAINTENANCE

OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY

AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL

WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING

THIS EQUIPMENT. WHEN USING AIR TOOLS, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE

THE RISK OF PERSONAL INJURY.

Carbon Monoxide

When this tool is running, ensure that the area is well ventilated. Never run the

engine in an enclosed area. Run the engine in an open area or with an exhaust

evacuation system in an enclosed area.

WARNING! THE EXHAUST CONTAINS POISONOUS CARBON MONOXIDE

GAS THAT CAN CAUSE LOSS OF CONSCIOUSNESS AND MAY LEAD TO

DEATH.

Gasoline and Oil

This product requires oil and fuel. Attempting to start the engine without oil will ruin

the engine and void the warranty. Work in a well ventilated area. Keep cigarettes,

flames or sparks away from the work area or where gasoline is stored.

WARNING! GASOLINE IS EXTREMELY FLAMMABLE AND IS EXPLOSIVE

UNDER CERTAIN CONDITIONS. KEEP OUT OF REACH OF CHILDREN.

• Gasoline fuel and fumes are flammable and potentially explosive. Use proper fuel storage and

handling procedures. Always have multiple ABC class fire extinguishers nearby.

• Keep the generator and surrounding area clean at all times.

• Fuel or oil spills must be cleaned up immediately. Dispose of fluids and cleaning materials as per

any local, state, or federal codes and regulations. Store oily rags in a covered metal container.

• Never store fuel or other flammable materials near the generator.

General Precautions

WARNING! FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN

SEVERE INJURY OR DEATH.

CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS CAN ALSO

RESULT IN DAMAGE TO THE TOOL AND/OR THE ITEM YOU ARE WORKING

ON. 4

General Precautions

Gasoline and Oil

• Do not smoke, or allow sparks, flames or other sources of ignition around the engine and fuel

tank. Fuel vapors are explosive.

• Keep grounded conductive objects, such as tools, away from exposed, live electrical parts and

connections to avoid sparking or arcing. These events could ignite fumes or vapors.

• Do not refill the fuel tank while the engine is running or while the engine is still hot. Do not

operate the generator with known leaks in the fuel system

• Excessive buildup of unburned fuel gases in the exhaust system can create a potentially

explosive condition. This buildup can occur after repeated failed start attempts, valve testing, or

hot engine shutdown. If this occurs, open exhaust system drain plugs, if equipped, and allow the

gases to dissipate before attempting to restart the generator.

Hot Components

Power Output

This generator is not designed to power sensitive electronic equipment (including computers

and medical devices) without the addition of an approved line conditioner, which is sold separately.

CAUTION: ATTEMPTING TO POWER SENSITIVE ELECTRONIC EQUIPMENT

WITHOUT THE USE OF AN APPROVED LINE CONDITIONER MAY CAUSE

DAMAGE TO THE EQUIPMENT.

FOR ANY DIRECT OR INDIRECT DAMAGE CAUSED BY FAILURE TO USE AN

APPROVED LINE CONDITIONER.

5PULSAR PRODUCTS INC.IS NOT RESPONSIBLE

•only use engine oil and fuel recommended by manufacturer.

WARNING! ENGINE AND EXHAUST SYSTEM PARTS BECOME VERY

HOT AND REMAIN HOT FOR SOME TIME AFTER THE ENGINE

INSULATED GLOVES OR WAIT UNTIL THE ENGINE AND EXHAUST SYSTEM

HAVE COOLED BEFORE HANDLING THESE PARTS.

HAS STOPPED

General Precautions

Work Area

• Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of flammable

liquids, gases, or dust. Generators create sparks which may ignite the dust or fumes.

• Keep bystanders, children, and visitors away while operating a generator. Provide barriers or

shields as needed.

Electrical Safety

• Grounded tools must be plugged into an outlet properly installed and

grounded in accordance with all codes and ordinances. Never remove the

grounding prong or modify the plug in any way. Do not use any adapter

plugs.

• Grounding provides a low-resistance path to carry electricity away from the

user in the event of an electrical malfunction.

• Double insulated tools are equipped with a polarized plug, where one blade is wider than the

other. This plug fits in a polarized outlet only one way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet.

Do not change the plug in any way. Double insulation eliminates the need for the three-wire

grounded power cord and grounded power supply system.

• Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.

There is an increased risk of electric shock if your body is grounded.

• Do not expose generator to rain or wet conditions. Water entering a generator will increase the

risk of electric shock.

• Do not abuse the power cord. Keep power cords away from heat, oil, sharp edges, or moving

parts. Replace damaged power cords immediately. Damaged power cords increase the risk of

electric shock.

• When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”.

These extension cords are rated for outdoor use, and reduce the risk of electric shock.

General Precautions

Electrical Safety

• All connections and conduits from the generator to the load must only be installed by trained and

licensed electricians, and in compliance with all relevant local, state, and federal electrical

codes and standards, and other regulations where applicable.

• The generator must be earth-grounded for fixed installations in accordance with all relevant

electrical codes and standards before operation.

• Do not attempt to connect or disconnect load connections while standing in water, or on wet or

soggy ground.

• Do not touch electrically energized parts of the generator and interconnecting cables or

conductors with any part of the body, or with any non-insulated conductive object.

• Connect the generator only to a load or electrical system (120 volt) that is compatible with the

electrical characteristics and rated capacities of the generator.

• Before servicing equipment powered by the generator, disconnect the equipment from its power

input.

• Keep all electrical equipment clean and dry. Replace any wiring where the insulation is cracked,

cut abraded or otherwise degraded. Replace terminals that are worn, discolored, or corroded.

Keep terminals clean and tight.

• Insulate all connections and disconnected wires.

• Guard against electric shock. Prevent body contact with grounded surfaces such as pipes,

radiators, ranges, and refrigerator enclosures.

฀฀฀฀Personal Safety

• Stay alert. Watch what you are doing, and use common sense when operating a generator. Do

not use generator while tired or under the influence of drugs, alcohol, or medication. A moment

of inattention while operating generators may result in serious personal injury.

• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing,

and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in

moving parts. 7

General Precautions

Personal Safety

• Avoid accidental starting. Make sure the power switch is in its “OFF” position and disconnect

the spark plug wire when not in use.

• Remove adjusting keys or wrenches before turning the generator on. A wrench or a key that is

left attached to a rotating part of the generator may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times.

• Use safety equipment. Always wear eye protection. Wear ANSI approved safety impact eye

goggles. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for

appropriate conditions.

• Do not force the generator. Use the correct generator for your application. The correct generator

will do the job better and safer at the rate for which it is designed.

• Do not use the generator if the power switch does not turn it on or off. Any generator that cannot

be controlled with the power switch is dangerous and must be replaced.

Generator Use and Care

Make sure the power switch is in its “OFF” position and disconnect the spark plug wire before

making any adjustment, changing accessories, or storing the generator. Such preventative safety

measures reduce the risk of starting the generator accidentally.

Store idle generators out of reach of children and other untrained persons. Generators are

dangerous in the hands of untrained users.

Maintain generators with care. Do not use a damaged generator. Tag damaged generators “Do not

use” until repaired.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that

may affect the generator’s operation. If damaged, have the generator serviced before using. Many

accidents are caused by poorly maintained generators.

Use only accessories that are recommended by the manufacturer for your model. Accessories that

may be suitable for one generator may become hazardous when used on another generator.

General Precautions

Servicing

Generator service must be performed only by qualified repair personnel. Service or maintenance

performed by unqualified personnel could result in a risk of injury.

When servicing a generator, use only identical replacement parts. Follow all appropriate

instructions in this manual. Use of unauthorized parts or failure to follow maintenance instructions

may create a risk of electric shock or injury.

Heart Pacemakers

WARNING! PEOPLE WITH PACEMAKERS SHOULD CONSULT THEIR

PHYSICIAN(S) BEFORE USING THIS PRODUCT. ELECTROMAGNETIC

FIELDS IN CLOSE PROXIMITY TO A HEART PACEMAKER COULD CAUSE

INTERFERENCE TO OR FAILURE OF THE PACEMAKER.

Installation

• Ensure installation meets all applicable safety, local and national electrical codes. Have

installation performed by a qualified, licensed electrician and building contractor.

• All electrical work, including the earth-ground connection, should be completed by a licensed

electrician.

• Any separate fuel storage or generator supply facility must be built or installed in full compliance

with all relevant local, state, and federal regulations.

• It is recommended to use the generator only in well ventilated, outdoor areas. A running

gasoline engine will generate carbon monoxide, a colorless, odorless gas that, if inhaled, can

cause serious injury or death. If the generator is installed indoors, exhaust fumes must be piped

out of the building using leak-free, heat resistant piping. Pipes and silencer should not use any

flammable materials, nor should they be installed near the same. Generator exhaust fumes

must be within legal limits and installation must always meet local building codes.

฀฀9Maintain labels and name plates on the generator and engine. These carry important information.

If unreadable or missing, contact Pulsar Products Inc. Immediately for a replacement.

General Precautions

Installation

• If the generator is installed outdoors, it must be weatherproofed and should be soundproofed. It

should not be run outdoors without protection to the generator and wiring conduit.

• Before lifting the generator, ensure the lift rigging and supporting structure are in good

condition, and are rated to lift such a load.

• Keep all personnel away from the suspended generator during relocating.

• The supporting oor/ground surface should be level and strong enough to safely hold the weight

of the generator. If the floor/grounded surface is not level, strong cross members should be

placed under the full length of the generator frame at its low side.

• For trailer installation, the generator should be mounted on the center point of the trailer, over

the wheels. The trailer must be capable of supporting the weight of the generator and all

contents (tools, etc.)

• Install sound-and weather-proofing only when it is not raining or snowing to avoid trapping

moisture within the generator’s area.

Mechanical

• Always make sure the power switch is in its “OFF” position. Disconnect the spark plug wire, and

allow the engine to completely cool before carrying out maintenance.

• Check for damaged parts. Before using the generator, any part that appears damaged should

be carefully checked to determine that it will operate properly and perform its intended function.

Check for alignment and binding of moving parts, any broken parts or mounting fixtures, and any

other condition that may affect proper operation.

• The generator weighs lbs (approximately) . Two or more people should assist

when moving or lifting this

product. Never lift the generator using the engine or alternator

lifting lugs. Connect lifting

equipment to the frame of the generator

120

• The generator is designed with guards for protection from moving parts. Care must still be taken

to protect personnel and equipment from other mechanical hazards when working

around the

generator.

Inhaltsverzeichnis

Andere Pulsar Tragbarer Generator Handbücher

Pulsar

Pulsar PG1202S Bedienungsanleitung

Pulsar

Pulsar PG2300iS Bedienungsanleitung

Pulsar

Pulsar PG6580E Bedienungsanleitung

Pulsar

Pulsar PGD40iSCO Bedienungsanleitung

Pulsar

Pulsar PG10000BRCO Bedienungsanleitung

Pulsar

Pulsar PG7750B Bedienungsanleitung

Pulsar

Pulsar PGD105TiSCO Bedienungsanleitung

Pulsar

Pulsar PG6580ECO Bedienungsanleitung

Pulsar

Pulsar PG7000DOF Bedienungsanleitung

Pulsar

Pulsar G12KBN Bedienungsanleitung

Pulsar

Pulsar PG10000 Bedienungsanleitung

Pulsar

Pulsar PG6580BCO Bedienungsanleitung

Pulsar

Pulsar PGD95BiSCO Bedienungsanleitung

Pulsar

Pulsar G2319N Bedienungsanleitung

Pulsar

Pulsar PG15KVTW Bedienungsanleitung

Pulsar

Pulsar PG3250 Bedienungsanleitung

Pulsar

Pulsar PG2200 Bedienungsanleitung

Pulsar

Pulsar PG7750BCO Bedienungsanleitung

Pulsar

Pulsar PG4000iSR Bedienungsanleitung

Pulsar

Pulsar PG3500MR Bedienungsanleitung

Pulsar

Pulsar PG10000B Bedienungsanleitung

Pulsar

Pulsar G465GN Bedienungsanleitung

Pulsar

Pulsar GD400BN Bedienungsanleitung

Pulsar

Pulsar PG5250BCO Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

ConMed

ConMed 7550 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

Power Stroke

Power Stroke PS906025 Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

PowerBoss

PowerBoss PowerBoss Bedienungsanleitung

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung