Puzer Easy Bedienungsanleitung

USER MANUAL

PUZER EASY

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

www.puzer.

Puzer central vacuum cleaner - Genuinely Finnish!

PLEASE READ THIS MANUAL BEFORE

USING THE VACUUM CLEANER

The small and handy central vacuum cleaner of the Puzer collection

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Puzer Easy

Important safety instructions

PLEASE KEEP THIS MANUAL FOR FUTURE USE

NB! Read all the safety instructions and

warnings before using your central vacuum

cleaner.

• This central vacuum cleaner is designed

for vacuuming in dry areas do not use it

for vacuuming liquid.

• Do not vacuum near smoke, glowing embers,

re or hot ashes.

• Do not vacuum in areas that may contain

burning or easily ammable liquids and gases.

• Always pull out the plug before changing the lter or

dust bag, and before servicing.

• When you pull out the plug, pull by the plug,

never pull the cord.

• The outlet and the plug shall be in a clearly visible

place.

• Do not mount the vacuum cleaner into too

narrow a place. The minimum height of the space

530mm Width 480mm.

• Do not vacuum sharp objects, such as glass or

needles as they may get stuck in the pipework.

• Do not cover the central unit.

• Always comply with the instructions in this manual.

• The servicing of the vacuum cleaner must only

be carried out by an authorized servicing compa-

ny. Use only spare parts and accessories recom-

mended by the manufacturer. Never try to make

any alterations into the vacuum cleaner.

• Never use a central vacuum cleaner with a faulty

electrical wire. The central vacuum cleaner has a

special wire that should always be replaced with

a wire of the same type. They can be purchased

at authorised repair shops.

• Remember that the central vacuum cleaner

is not a toy.

• Never vacuum without a dust bag.

• Always pull out the hose from the suction outlet

after you nish vacuuming.

CONTENTS

Safety instructions

The features of the Puzer Easy circuit board

Troubleshooting

Servicing

Using the system

Mounting the central unit

Specications

Installation of additional suction outlets

TECHNICAL SPECIFICATIONS

Puzer Easy central vacuum cleaner

Motor power max.

Air power max.

Vacuum max.

Suction power max.

Noise level min.

Height / required space

Width / depth

Overheat protectors

Fuse (automatic)

Operating voltage min – max

Hepa 12 lter

IP class

Volume of the container

1200 W

165 m3/h

28 kPa

550 W

66 dB(A)

46/53 cm

46/28 cm

10 A (slow)

V 50Hz 210-244

IPX0

Puzer Easy is developed especially for apartment and row houses or for renovation sites.

The exhaust air of the Easy vacuum cleaner is directed through a washable HEPA 12 allergy

lter to the installation space. A separate exhaust pipe is not needed. The mounting of the

equipment does not require other operations than fastening it to the wall with four screws.

The benet of Easy is that the exhaust air does not circulate the air in the whole apartment

like with a normal vacuum cleaner. Easy on is very silent and effective.

INSTALLING THE CENTRAL VACUUM CLEANER

There are detailed instructions on how to mount the Puzer dust piping system and

suction outlets. These instructions are included in your piping system delivery.

1. Fasten the lter unit

with four screws to

their correct locations.

Use wall brackets

depending on the

material.

2. Tighten the faste-

ning screws. 3. Fasten the connec-

tor of the weak current

wire to the counter

piece of the lter unit.

The connector of the

weak current wire can

be found separately in

the package.

4. Push the central

unit directly towards

the lter unit. Push the

central unit toward the

lter unit.

9. Fasten the weak

current wires and the

mains cable to the

circuit board of the

machine.

5. Place the central

unit directly towards

the lter unit. Make

sure that the rubber

pieces behind touch

their counterpieces.

6. Put the latches to

their correct places.

Support the central

unit with your other

hand so that it will not

fall.

7. Push the latch

all the way to the

bottom.

8. Place the other

latch to its place.

Repeat points 5 and

INFORMATION

In case you need any help with planning and installing your central vacuum sys-

tem, please contact the dealer or the manufacturer in the following address.

Manufacturing and marketing:

KP-TEKNO OY

Masalantie 365, 02430 Masala, tel.+358 9 296 5070, fax +358 9 221 5932

e-mail: puzer@puzer., www.puzer.

USING THE SYSTEM

THE OPERATION PRINCIPLES OF THE CENTRAL

VACUUM CLEANER

When the user is connected to the system by con-

necting the suction hose to the wall outlet, an elec-

tronic signal from the wall outlet is sent to the cent-

ral unit to start the system. The central unit starts,

and the vacuum created by the system causes suc-

tion in the pipings.

The central unit stays on, until the hose is pulled out

from the suction outlet. The vacuum cleaner can be

equipped with a hose featuring a handle switch to

start the vacuum.

Vacuuming construction or

gypsum dust or

ashes is strictly forbidden

without a pre-separator.

Pre-separator

Wealt box

Puzer Central Vacuum Cleaner is easy to use. If

your system includes a suction hose with a handle

switch, push the hose to the suction outlet as in-

dicated by the image ( 1). Now you can start and

stop the system using the switch in the handle of

the suction hose. If you are using a suction hose

without a handle switch feature, the system starts

when you connect the suction hose to the suction

outlet. The central vacuum cleaner is designed for

traditional vacuuming of household dust and litter.

When vacuuming an area that is very dusty or wet,

a pre-separator must be used. ( 2).

MAINTENANCE

OF THE CENTRAL VACUUM CLEANER

1. When changing/

cleaning the lter,

turn the locking lever

downward.

2. Pull the cover out

and slightly down-

ward.

3. Pull the lter out

in a slightly diagonal

position the same way

as it is in its place.

Replace it in the same

way in a slightly diag-

onal position.

MAINTENANCE AND CLEANING OF THE FILTER

4. Push the upper

edge of the lter cover

back to its position.

Press the lower edge

down and turn the

locking lever up.

Warning: Do not scratch, rub or use high

pressure water when cleaning the lter.

This may damage the lter permanently.

There may also be some discoloration after

the wash.

1. Remove the lter carefully from the plastic

frame in the vacuum cleaner.

2. Rinse the dirty side of the lter under a wa-

ter tap with lukewarm, low pressured water in

the direction of the folds so that the water can

run along the lamellas. (see picture)

3. Turn the lter and wash from the opposite

direction as indicated by the image. Continue

rinsing, until the lter is clean.

4. Shake the water carefully off the lter and

let it dry for at least an hour before placing the

lter back to the vacuum cleaner.

Do not place a wet lter to the vacuum

cleaner.

Remember to let the lter dry

after washing it before

replacing it. !CLEANING THE FILTER

1. In case additional suction outlets

are installed to the system, remove

the plug in the upper corner of the

unit. This way you can take an ad-

ditional box from the lter unit e.g.

behind the wall or to other rooms.

2. When using the original 42 mm

polypropylene pipe, rst place a

washer to the hole. The installation

can also be started with the corner

pieces.

3. Connect the weak current

connection of the additional outlet

to the terminal block behind the

wall rack.

INSTALLATION OF ADDITIONAL SUCTION OUTLETS

Model:

Product number:

Serial number/ date:

Date of purchase:

KEEP THE RECEIPT

TROUBLESHOOTING

THE VACUUM CLEANER DOES NOT START

- Is the central unit connected to the mains?

- Is the wall socket supplied with electricity?

- Is the low voltage cable connected to the lter unit of

the central vacuum cleaner?

- Have you got the right hose? Original hoses have the

right contactors

- Does the vacuum cleaner start, if you try another suc-

tion outlet? If the vacuum cleaner starts, the fault is in

the electrical connections of the suction outlet. Detach

the outlet and check the wiring connections.

- If you have installed additional suction outlets, does

the vacuum cleaner start when you try from another

suction outlet? If the vacuum cleaner starts, the fault

is in the electrical connections of the suction outlet.

Detach the outlet and check the wiring connections.

- The vacuum cleaner is equipped with a overheat pro-

tection function which may have tripped. Wait for ten

minutes until the vacuum cleaner cools down.

If the protection function comes on again, contact an

authorized service company.

-Hastheautomaticfuseofthevacuumcleanertripped?

Press it and restart.

The main fuse shall be of 10A

NOTE:

230 V ELECTRICAL WORK CAN ONLY BE CARRIED OUT

BYA PROFESSIONAL WHO IS AWARE OF ALL THE SAFETY REGULATIONS.

LOW SUCTION

- Are all the suction outlets properly tted?

- Has something got stuck in the suction outlet?

- Is the dust bag full?

- Is the cover properly placed?

- Are the suction pipes blocked?

- Is the hose blocked?

- Is there a leak in the pipework?

- Are the O rings of the suction outlet in their place?

SERVICE AND SPARE PARTS

If your vacuum cleaner needs servicing or

spare parts, please mention the technical

data on the type shield. The shield is locat-

ed inside the machine by the dust bag. Write

down the information below. That way they

are always within reach.

The guarantee of the central unit is 5 years.

The symbol marked to the

product or package indicates

that this product must not

be handled as household

waste. Instead, the product

shall be submitted to a suitable recycling

point that takes care of the recycling of

electrical and electronic equipment. The

appropriate disposal of this product helps

to prevent any harmful effects on the

environment and health, which may be

caused by the inappropriate handling of

this product. More exact information on

the recycling of this product can be found

in the local municipal ofce, household

waste service or the place where you

have purchased the product.

FEATURES OF THE PUZER EASY CIRCUIT BOARD

1 - SOFT START

ThestartpeakislimitedwithaTRICrelay,thiswaythestartpowerisdeliveredtothemotorwithadelayof1

second. The start voltage is signicantly smaller and the stress of the fuses, network and motor decreases.

2 - LOW VOLTAGE LED AUTOPOLARITY *2

The green light in the machine of the pendant is always on when the voltage is connected.

(i.e. the plug is in the outlet)

3 - OPERATION HOUR COUNTER *3

By using EEPROM technology (erasable programmable ROM), the card registers two two types

of time, which can be checked by the user only by looking at two separate LEDs located in the

protective board of the circuit board. a. Short time b. Total time

TIME USED LED COLOUR MEANS OPERATION

15 hours Slow green blinking The vacuum cleaner has been

used 15 hours since the last

receipt

Change/check the dustbag and

press the receipt button for 5

seconds

0-399 hours Green Less than 400 operation hours -

400 - 499 Orange Over 400 operation hours -

Over 500 hours Red Over 500 operation hours -

4 - SELF CHECK

When the mains cable is connected, the circuit board

performs a self check. When everything is ok,

the LED blinks quickly for a few seconds.

5 - SHUT OFF DELAY

The shut off has a two (2) second delay so that the

pipe work and hose are surely emptied after the

switch off.

6 - RESET/DEMO SWITCH *6

Makes the following operations:

Function Operation Result

Test/demo Press and release the switch in less

than 5 seconds. The card performs a self check and

goes through all the phases of the

previous table (see table 1)

Partial reset Press the switch for over 5 seconds

when the motor is not running. The system will reset the 15 hours’

countdown and the blinking LED

(3) returns to the continuously on

mode.

Total reset Press the switch over 30 seconds

when the engine is running. The system reset the total time

calculation.

7 - AUTOMATIC FUSE*7

The circuit board is equipped with an automatic fuse, (the button with the text “circuit breaker”).

The reset takes place by pushing the button.

*3 *6 *7

www.puzer.

Puzer central vacuum cleaner - Genuinely Finnish!

1. In case additional suction outlets are installed to the system,

remove the plug in the upper corner of the unit. This way you can

take an additional box from the lter unit e.g. behind the wall or to

other rooms.

2. When using the original 42 mm polypropylene pipe, rst

place a washer to the hole. The installation can also be start-

ed with the corner pieces.

THE INSTALLATION OF ADDITIONAL SUCTION OUTLETS

3. Connect the weak current connection

of the additional outlet to the terminal block

behind the wall rack.

INFORMATION

In case you need any help with planning and installing your central

vacuum system, please contact the retailer or manufacturer

in the address below.

Manufacturing and marketing:

KP-TEKNO OY

Masalantie 365, 02430 Masala

tel. +358 9 296 5070, fax +358 9 221 5932

e-mail: puzer@puzer., www.puzer.

Inhaltsverzeichnis

Andere Puzer Staubsauger Handbücher

Puzer

Puzer Eeva Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung