Quantum DX100 Bedienungsanleitung

Document 6513502-06 A01, October 2006 1

Quantum DX-Series

System Unpacking

and Installation Instructions

Introduction 3

Selecting an Installation Location 4

Rack Space Requirements.........................................................................................5

Environmental Conditions .......................................................................................6

Preparing for the Installation 7

Providing Necessary Tools and Equipment ..........................................................7

Taking ESD Precautions ...........................................................................................7

Unpacking the DX-Series System 7

Installing the DX-Series System 12

Locating the Mounting Position ............................................................................12

Installing the DX-Series Storage Array.................................................................15

Installing the Fibre Channel Switch (DX100 Only).............................................20

Installing the Ethernet Switch (DX100 Only).......................................................25

Installing the DX-Series Controller .......................................................................27

Installing the AC Power Sequencers (DX100 Only) ...........................................30

Installing Additional Storage Arrays 41

Cabling the DX-Series System 41

Installing the SFP Connectors ................................................................................41

Verifying Storage Array Dip Switches .................................................................43

Cabling a DX30.........................................................................................................44

Cabling a DX100.......................................................................................................46

Quantum DX-Series Series Unpacking and Installation Instructions

Document 6513502-06 A01

October 2006

Made in the USA.

Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including but not limited to

the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this publication from time to

time without notice.

Your right to copy this document is limited by copyright law. Making copies or adaptations without prior written authorization of Quantum

Corporation is prohibited by law and constitutes a punishable violation of the law.

TRADEMARK STATEMENT

Capacity on Demand (CoD), Crosslink Mechanism, DLT, DLTSage, DLTtape, Super DLTtape, Performance on Demand, (PoD), PRISM,

PRISM Storage Architecture logo, SiteCare, StackLink, StorageCare, SuperLoader, and ValueLoader are all trademarks of Quantum

Corporation. Quantum, the Quantum logo, and the DLTtape logo are all registered trademarks of Quantum Corporation.

Other trademarks may be mentioned herein which belong to other companies.

Power Cabling..........................................................................................................54

Configuring the DX-Series System 54

Turning On the DX-Series System.........................................................................55

Initially Configuring the DX-Series System.........................................................57

Accessing the DX-Series Controller ......................................................................64

Adding a Partition ...................................................................................................68

Configuring the Network Information.................................................................70

Configuring the Date and Time.............................................................................71

Configuring the Security Options .........................................................................72

Configuring the Fibre Channel Settings...............................................................75

Configuring the Email Settings..............................................................................78

Configuring the SNMP Settings ............................................................................80

Enabling Fibre Channel Compression..................................................................84

Saving the DX-Series Configuration File..............................................................85

Restarting the System..............................................................................................86

Quantum DX-Series System Unpacking and Installation Instructions

Document 6513502-06 A01

October 2006

Introduction 3

Introduction 0

The Quantum DX-Series system consists of the DX30 and DX100 device. Both

are backup devices based upon high speed disk drives instead of tape drives.

The DX30 consists of:

• A single controller and 1 to 4 storage arrays.

The DX100 consists of:

• A single controller and 2 to 16 storage arrays

• One or two Fibre Channel switches

• An Ethernet switch

• Two or more AC power sequencers.

The system emulates an ATL P1000 library with up to 55 virtual digital linear

tape (DLT™) 7000 tape drives for DX100 and up to 30 DLT7000 tape drives

for DX30 (see figure 1).

Both the DX30 and the DX100 use the same system components (controller

and storage arrays). The DX100 storage arrays, however, contain dual RAID

controllers and the overall DX100 system can expand to sixteen storage

arrays. The DX100 controller also has a full compliment of Fibre Channel

HBAs (two quad port HBAs and four dual port HBAs) whereas the DX30 has

two Fibre Channel HBAs (one quad port HBA and one dual port HBA).

This document describes how to unpack and install both a DX30 and DX100

system into a customer-provided rack enclosure.

Note: The DX-Series storage array is shipped with the following RAID

configuration (refer to the Quantum DX-Series User’s Guide

PN6513501 for more information on RAID configurations):

• 1 logical drive configured in RAID 5 (7 data drives + 1 parity

drive)

• 1 logical drive configured in RAID 5 (6 data drives + 1 parity

drive)

• 1 global hot spare

To reconfigure the DX-Series storage array to either remove the hot

spare or add an additional hot spare (total of two hot spares), refer

to the Quantum DX-Series Field Service Manual PN6513503. The

RAID configuration MUST be set prior to powering on the DX-Series

system.

Quantum DX-Series System Unpacking and Installation Instructions

Document 6513502-06 A01

October 2006

4 Selecting an Installation Location

Figure 1 DX-Series

Components

Selecting an Installation Location 0

When choosing an installation site for the DX-Series system, consider the

following requirements:

•Rack Space Requirements

•Environmental Conditions

DX-Series controller

DX-Series storage array

Ethernet switch

Fibre Channel switch

(DX100 only)

AC power sequencer

(DX100 only)

Quantum DX-Series System Unpacking and Installation Instructions

Document 6513502-06 A01

October 2006

Selecting an Installation Location 5

Rack Space

Requirements 0Figure 2 shows the minimum rack space required by both the DX30 and

DX100.

• Depth - 30 in (76.2 cm)

• Width - 19 in (48.3 cm)

• Height - 10.5 in (27 cm) - 3U per additional array

• DX30 base unit - 6U (15U with a maximum of 4 storage arrays)

• DX100 base unit - 12U (58U for a maximum of 16 storage arrays, two

Fibre Channel switches, two or more AC power sequencers, and one

Ethernet switch)

• Weight - Storage array - 75 lbs (34 kg), controller - 52 lbs (24 kg)

• DX100 only - Fibre Channel switch 20 lbs (9 kg), Ethernet switch -

5 lbs (2.3 kg), and AC power sequencer - 10 lbs (4.5 kg)

• Clearance behind DX-Series system - 4 in (10 cm) for proper air flow

• Clearance above DX-Series controller module - 6 in (15 cm) for access to

the fan modules and Fibre Channel HBAs in the controller.

Quantum DX-Series System Unpacking and Installation Instructions

Document 6513502-06 A01

October 2006

6 Selecting an Installation Location

Figure 2 Rack Space

Requirements

Environmental

Conditions 0The installation site must have the following environmental conditions:

• Humidity: 20%-80% non-condensing

• Temperature: 15°C-35°C (59°F-95°F)

• Altitude: -984 to 10,000 feet (-300 to 3048 meters)

These environmental conditions apply when the DX-Series system is in

operation.

Note: For additional DX-Series specifications (including environmental

requirements during shipping and storage), see the Quantum

DX-Series User’s Guide (PN 6513501).

30to36in(76.2to91cm)

19in(48.3cm)

Quantum DX-Series System Unpacking and Installation Instructions

Document 6513502-06 A01

October 2006

Preparing for the Installation 7

Preparing for the Installation 0

Before you begin the installation procedure in this section, make the

following preparations as described in this section:

•Providing Necessary Tools and Equipment

•Taking ESD Precautions

Providing Necessary

Tools and Equipment 0Provide the following tools for unpacking the DX-Series system:

• #1 PHILLIPS® screwdriver

• #2 PHILLIPS screwdriver

• #1 Flat head screwdriver

• Antistatic wrist strap included in accessory kit

Taking ESD

Precautions 0Some components within the DX-Series system contain static-sensitive parts.

To avoid damaging these parts while performing installation procedures,

always observe the following precautions:

• Keep the DX-Series system turned off during all installation procedures.

• Use an antistatic wrist strap (included in the accessory kit).

• Keep static-sensitive parts in their original shipping containers until

ready for installation.

• Do not place static-sensitive parts on a metal surface. Place them inside

their protective shipping bag or on an antistatic mat.

• Avoid touching connectors and other components.

Unpacking the DX-Series System 0

This section explains how to unpack the DX-Series system components and

move them to their final installation location. The DX-Series system is

shipped in two configurations: DX30 and DX100 (see table 1):

Note: Dry climates and cold-weather heating environments have lower

relative humidity and are more likely to produce static electricity.

Quantum DX-Series System Unpacking and Installation Instructions

Document 6513502-06 A01

October 2006

8 Unpacking the DX-Series System

Table 1 DX-Series

Packaging Contents

By following these instructions, you help ensure that the system will continue

to be safeguarded after it arrives at the installation site.

Unpack and remove the following components from the packing materials

(see figure 3, figure 4, figure 5, and figure 6):

• DX-Series controller

• DX-Series storage array(s)

• DX-Series Fibre Channel switch (DX100 only)

• Ethernet switch (DX100 only)

• AC power sequencer (DX100 only)

Components DX30 Base System DX100 Base System

Controller 1 1

Storage array* 1-single RAID

controller (4 max)

2-dual RAID

controllers (16 max)

Fibre Channel Switch Not required 1

Ethernet switch Not required 1

AC power kit

containing 2 AC power

sequencers

Not required 1 kit for every 4

storage arrays

(ordered separately)

* Additional storage arrays can be added to increase system capacity

Quantum DX-Series System Unpacking and Installation Instructions

Document 6513502-06 A01

October 2006

Unpacking the DX-Series System 9

Figure 3 Unpacking the

DX30

Bottom

Storage array

Cover

DX30 packaging

Storage array

accessory kit

Antistatic

bag

Hard drive

Controller

accessory kit

Antistatic

bag

RAID controller

sleds

packing foam

Top

packing foam

Bottom

packing foam

Top

packing foam

Quantum DX-Series System Unpacking and Installation Instructions

Document 6513502-06 A01

October 2006

10 Unpacking the DX-Series System

Figure 4 Unpacking the

DX100

Top packing foam

Storage array

Cover

DX100 packaging

Storage array

accessory kit

Antistatic

bag

Hard drive

Top

Controller

accessory kit Antistatic

bag

RAID controller(s)

Antistatic

bag

Fibre Channel switch

accessory kit

Fibre Channel

switch

sleds

packing foam

Top

packing foam

Andere Handbücher für DX100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Quantum Lagerung Handbücher

Quantum

Quantum P2000 Series Bedienungsanleitung

Quantum

Quantum ValueLoader LTO-1 Bedienungsanleitung

Quantum

Quantum P4000 Series Bedienungsanleitung

Quantum

Quantum Scalar 10K Bedienungsanleitung

Quantum

Quantum DXi3500 Technisches Handbuch

Quantum

Quantum DXi4700 Installations- und Betriebshandbuch

Quantum

Quantum LTO-3 Bedienungsanleitung

Quantum

Quantum DLTtape DLT1 Bedienungsanleitung

Quantum

Quantum Lattus A10 Bedienungsanleitung

Quantum

Quantum DAT 160 Bedienungsanleitung

Quantum

Quantum QDFLD25-***MUH1I Series Bedienungsanleitung

Quantum

Quantum ATL M1500 Bedienungsanleitung

Quantum

Quantum ActiveScale X100 Bedienungsanleitung

Quantum

Quantum StorNext QD7000 Bedienungsanleitung

Quantum

Quantum PX500 Series Bedienungsanleitung

Quantum

Quantum StorNext QD7000 Montageanleitung

Quantum

Quantum Tape Drive A-Series Bedienungsanleitung

Quantum

Quantum PowerStor L200 Bedienungsanleitung

Quantum

Quantum FastStor 1 Bedienungsanleitung

Quantum

Quantum Q250 Produkthandbuch

Quantum

Quantum Scalar 218 Installationsanleitung

Quantum

Quantum Scalar i40 Bedienungs- und Sicherheitshinweise

Quantum

Quantum DAT 160 Service-Handbuch

Quantum

Quantum P1000 Series Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung