RDMODWEB
Manuale Utente
1. Preliminary Instructions
•GeneralWarnings
This equipment should only be operated, installed and
maintainedby“trained”or“qualied”personnelwhoarefamiliar
withrisksinvolvedinworkingonelectricandelectroniccircuits.
“Trained”meanspersonnelwhohavetechnicalknowledgeof
equipment operation and who are responsible for their own
safetyandthatofotherunqualiedpersonnelplacedunder
their supervision when working on the equipment.
“Qualified” means personnel who are trained in and
experienced with equipment operation and who are
responsiblefortheirownsafetyandthatofotherunqualied
personnel placed under their supervision when working on
the equipment.
WARNING:Residualvoltagemaybepresentinside
theequipmentevenwhentheON/OFFswitchissetto
Off. Before servicing the equipment, disconnect the
power cord or switch off the main power panel and
make sure the safety earth connection is connected.
Some service situations may require inspecting the
equipmentwithlivecircuits.Onlytrainedandqualied
personnelmayworkontheequipmentliveandshallbe
assistedbyatrainedpersonwhoshallkeepreadyto
disconnectpowersupplyatneed.
R.V.R. Elettronica SpA shall not be liable for injury to
persons or damage to property resulting from improper use
oroperationbytrained/untrainedandqualied/unqualied
persons.
WARNING:Theequipmentisnotwaterresistant.
Anywaterenteringtheenclosuremightimpairproper
operation. To prevent the risk of electrical shock or
re,donotexposethisequipmenttorain,drippingor
moisture.
Pleaseobservelocalcodesandrepreventionruleswhen
installing and operating this equipment.
WARNING: This equipment contains exposed
livepartsinvolvinganelectricalshockhazard.Always
disconnectpowersupplybeforeremovinganycovers
orotherpartsoftheequipment.
Ventilation slits and holes are provided to ensure reliable
operation and prevent overheating; do not obstruct or
cover these slits. Do not obstruct the ventilation slits under
any circumstances. The product must not be incorporated
in a rack unless adequate ventilation is provided or the
manufacturer’s instructions are followed closely.
WA RNING : T his eq uipme nt can ra diate
radiofrequencyenergyand,ifnotinstalledincompliance
with manual instructions and applicable regulations,
maycauseinterferencewithradiocommunications.
WARNING: This equipment is tted with earth
connectionsbothinthepowercordandforthechassis.
Makesurebothareproperlyconnected.
Operationof thisequipment ina residentialarea may cause
radio interference, in which case the user may be required
to take adequate measures.
Thespecicationsanddatacontainedhereinareprovided
forinformationonlyandare subjecttochangeswithoutprior
notice. R.V.R. Elettronica SpA disclaims all warranties,
expressorimplied.WhileR.V.R.ElettronicaSpAattemptsto
provideaccurateinformation,it cannotacceptresponsibility
or liability for any errors or inaccuracies in this manual,
including the products and the software described herein.
R.V.R.ElettronicaSpA reservestherighttomakechanges
toequipmentdesignand/orspecicationsandtothismanual
at any time without prior notice.
•Noticeconcerningproductintendedpurposeanduse
limitations.
This product is a radio transmitter suitable for frequency-
modulation audio radio broadcasting. Its operating
frequenciesarenotharmonisedindesignatedusercountries.
Before operating this equipment, user must
obtain a licence to use radio spectrum from the
competent authority in the designated user country.
Operating frequency, transmitter power and other
characteristics of the transmission system are subject to
restrictionsasspeciedinthelicence.
2. Warranty
LaR.V.R. Elettronica S.P.A. warrantsthisproducttobefree
fromdefectsinworkmanshipanditsproperoperationsubject
tothelimitationssetforthinthesuppliedTermsandConditions.
PleasereadtheTermsandConditionscarefully,aspurchase
ofthe productoracceptanceof the orderacknowledgement
imply acceptance of the Terms and Conditions.
Forthelatestupdatedtermsandconditions,pleasevisitourweb
siteatWWW.RVR.IT.Thewebsitemaybemodied,removed
or updated for any reason whatsoever without prior notice.
The warranty will become null and void in the event the
product enclosure is opened, the product is physically
damaged,isrepairedbyunauthorisedpersonsor isusedfor
purposesotherthan itsintendeduse, as well as inthe event
of improper use, unauthorised changes or neglect.
In the event a defect is found, follow this procedure:
1 Contactthesellerordistributorwho soldtheequipment;
provide a description of the problem or malfunction for
theeventaquickxisavailable.
Sellers and Distributors can provide the necessary
informationtotroubleshootthemostfrequentlyencountered
problems. Normally, Sellers and Distributors can offer a
faster repair service than the Manufacturer would. Please
note that Sellers can pinpoint problems due to wrong
installation.
2 If your Seller cannot help you, contact R.V.R.
Elettronica anddescribetheproblem;ifourstaffdeems
itappropriate, youwill receivean authorisationto return
the equipment along with suitable instructions;
3 When you have received the authorisation, you may
return the unit. Pack the unit carefully before shipment;
use the original packaging whenever possible and seal
the package perfectly. The customer bears all risks of
loss (i.e., R.V.R. shall not be liable for loss or damage)
until the package reaches the R.V.R. factory. For this
IMPORTANT
Thelightningashwitharrowhead,withinatriangle,isintendedtoalerttheuserofthepresence
of dangerous voltage that may constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the equipment.
