Radio Shack 43-3888 Bedienungsanleitung

RadioShack and RadioShack.com are trademarks used

by RadioShack Corporation.

43-3888 OWNER’S MANUAL — Please read before using this equipment.

READ THIS BEFORE

INSTALLATION

Your Digital Answering System is ETL

listedtoULstandardsandmeetsall

applicable FCC requirements.

FCC STATEMENT

Your answering system complies with

Part 68 of FCC Rules.Youmust,upon

request, provide the FCC registration

number and the REN to your telephone

company. Both numbers are on the

bottom of your system.

!IMPORTANT !

If an icon appears at the

end of a paragraph, go

tothesideheadboxon

that page with the

corresponding icon for

pertinent information.

o —Signifies a

Warning

—Signifies a

Caution

!—Signifies Importan

text

CONTENTS

The FCC Wants You

to Know .................... 3

Features ................... 4

Preparation ............... 6

Operation ................ 11

Remote Operation .. 17

Care ....................... 19

Service and Repair . 19

The lightning symbol is intended to alert you

to the presence of uninsulated dangerous

voltage within this product’s enclosure that

might be of sufficient magnitude to consti-

tuteariskofelectricshock.Donotopenthe

product’s case.

The exclamation symbol is intended to in-

form you that important operating and

maintenance instructions are included in

the literature accompanying this product.

WARNING: To reduce the risk the of fire or

shockhazard, donotexposethis product to rain or

moisture. ..CAUTION..

CAUTION: TO REDUCE THE RISK OF ELEC-

TRIC SHOCK, DO NOT REMOVE COVER OR

BACK. NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL.

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

Digital Answering System

We have designed your answering

system to conform to federal

regulations, and you can connect it to

most telephone lines. However, each

answering system (and each device,

such as a telephone or answering

machine) that you connect to the

telephone line draws power from the

telephone line. We refer to this power

draw as the device's ringer equivalence

number, or REN on the bottom of your

answering system.

If you use more than one phone or other

device on the line, add up all of the

RENs. If the total is more than five

(three in rural areas), your telephones

might not ring. If ringer operation is

impaired, remove a device from the line.

In the unlikely event that your phone

causes problems on the phone line, the

phone company can temporarily

discontinue your service. If this

happens, the phone company attempts

to notify you in advance. If advance

notice is not practical, the phone

company notifies you as soon as

possible and advises you of your right

to file a complaint with the FCC.

Also, the phone company can make

changes to its lines, equipment,

operations, or procedures that could

ÔNOTE Ô

You must not connect

your answering system

to:• coin-operated

systems

• party-line systems

• mostelectronickey

telephone systems

FCC Statement

The FCC Wants You to Know

affect the operation of this telephone.

The telephone company notifies you of

these changes in advance, so you can

take the necessary steps to prevent

interruption of your telephone service.

THE FCC WANTS YOU

TO KNOW

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are

designed to provide reasonable

protection against harmful interference

in a residential installation. This

equipment generates, uses and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instructions, may cause

harmful interference to radio

communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does

cause harmful interference to radio or

television reception, which can be

determined by turning the equipment

off and on, the user is encouraged to try

to correct the interference by one or

more of the following measures:

Features

• Reorient or relocate the receiving

antenna.

• Increase the separation between

the equipment and receiver.

• Connect the equipment into an

outlet on a circuit different from

that to which the receiver is

connected.

• Consult your local RadioShack

store or an experienced radio/TV

technician for help.

• If you cannot eliminate the

interference, the FCC requires that

you stop using your answering

system.

Changes or modifications not expressly

approved by RadioShack may cause

interference and void the user’s

authority to operate the equipment.

You must use shielded interface cables

with this equipment.

FEATURES

Your RadioShack Digital Answering

System is a sophisticated, fully digital

message center that stores all

messages on a computer chip. This

gives you advanced capabilities over

tape-based answering machines.

Because this telephone answering

Features

system is fully digital, there are no tape

mechanisms to wear out and no tapes

to bother with.

Day/Time Stamp — records the day

and time each message was recorded.

Call Screening —letsyoulistento

incoming calls so you can decide

whether or not to answer a call.

Remote Operation — lets you operate

the system while you are away from

your home or office.

Multiple Outgoing Messages (OGM)

— lets you set the system to play your

message or the prerecorded message,

or just play your announcement without

recording the caller’s message.

High Memory Capacity —letsyou

record up to 25 minutes of messages,

memos, and two-way phone

conversations.

Voice Activated Recording (VOX)

Detection — the system stops

recording when the caller hangs up or

after 7 seconds of silence to help

conserve memory space.

Preparation

PREPARATION

INSTALLING THE BACKUP

BATTERY

If AC power fails or you unplug the

system, one 9V alkaline battery (not

supplied) is needed to save any re-

corded messages and the settings for

the day and time. For the best

performance and longest life, we

recommend you use a RadioShack

alkaline battery.

1. Use a Phillips screwdriver to re-

move the screw on the battery

compartment cover, then remove

the cover.

2. Attach a 9V alkaline battery to the

terminals and place the battery in

the compartment.

3. Replace the cover and secure it

with the screw.

Replace the battery when Lo appears

on the display while the system is

connected to AC power.

CONNECTING AC POWER

Insert the supplied AC adapter’s barrel

plug into the DC 9V jack on the back of

the system, then plug the adapter into a

ÔNOTES Ô

• The system cannot

operate withoutAC

power.

• Do not press any

button while you

are plugging the

adapterinto theAC

outlet. If you

accidentally press

a button, reset the

system by

unplugging the

adapter from the

AC outlet and re-

inserting it.

Preparation

standard AC outlet. The display lights

and Cr appears.

The system initializes in about 20

seconds, then sounds 4 tones. 00 and

-- alternately appear. If you did not

install a backup battery, Lo,00,and--

alternately appear.

CONNECTING THE SYSTEM

TO APHONE LINE

Plug the system’s attached phone line

cord into the wall jack. Plug the

modular phone line cord into the

system’s TEL LINE jack.

You must use compatible modular

jacks that are compliant with Part 68 of

FCC Rules.

ÔNOTE Ô

The USOC number of

thejacktobeinstalledis

RJ11C (or RJ11W for a

wall plate jack).

Attached Phone Line Cord

Wall

Jack

DC 9V Jack

Modular Phone

Line Cord

Power Cord

TEL LINE Jack

Preparation

TURNING THE SYSTEM ON/

OFF

To turn on the system, press ON/OFF/

STOP. The display lights and the

system sounds a tone. The system is

set to answer calls.

To turn it off, press ON/OFF/STOP.The

display turns off and the system sounds

2 tones.

ADJUSTING THE VOLUME

Push down or pull up VOLUME /

to increase or decrease the volume.

The system sounds a tone when you

change the volume.

SETTING THE DAY AND TIME

The day/time voice stamp automatically

defaults to Monday, 12:00 AM when

you connect the system to power.

1. Turn on the system. Hold down

SKIP/TIME SET/CHECK. The

system sounds a tone after 1

second.

2. While holding down SKIP/TIME

SET/CHECK,pressREPEAT/ANNC/

DAY. The system announces

“Monday” and 01 appears on the

display. Repeatedly press REPEAT/

ANNC/DAY until you hear or see the

correct day.

ÔNOTE Ô

Hold down SKIP/

TIME SET/CHECK

continuously for Steps

1–4.

Preparation

3. While holding down SKIP/TIME

SET/CHECK, press MEMO/2 WAY/

HOUR. The system announces “1

AM”. 01 appears on the display.

Repeatedly press MEMO/2 WAY/

HOUR until you hear or see the

correct hour.

4. While holding down SKIP/TIME

SET/CHECK, press PLAY/PAUSE/

MIN. The system announces “01”.

01 appears on the display.

Repeatedly press or hold down

PLAY/PAUSE/MIN until you hear or

see the correct minute.

5. Release SKIP/TIME SET/CHECK.

The system announces the day

and time you set.

6. To hear the current day and time,

press SKIP/TIME SET/CHECK while

the system is on or off.

SETTING THE NUMBER OF

RINGS

To control the duration before the

system answers a call, slide RING

SELECT on the system’s right side to

the desired number of rings (2,4,7or

TS).

TS (Toll Saver) – If you choose the Toll

Saver option, and there are new

ÔNOTES Ô

• When you hold

down PLAY/

PAUSE/MIN,the

system will move

forward by 10

minutes until it

reaches 00.

• If you have not set

the day and time

and you press

SKIP/TIME SET/

CHECK,the

system announces

“Please set time”.

Preparation

messages, the system answers after

two rings. Otherwise, the system

answers after four rings. This lets you

avoid unnecessary charges when

calling by long distance to check your

messages. If you hear more than two

rings, you know you can hang up

because the system has no new

messages.

SETTING THE INCOMING

MESSAGE LENGTH

Slide INCOMING MSG to 1or 5MIN

(minutes) to choose the length of

incoming messages.

If you slide INCOMING MSG to ANN

ONLY (Announcement Only), the

system plays your outgoing message,

but the caller cannot record a message.

After the system answers, it monitors

the line for 10 seconds for any remote

code entry.

RECORDING THE OUTGOING

MESSAGE

The system has a prerecorded

outgoing message (OGM) that says

“Hello, please leave a message after

the tone.” You can use this message or

record your own.

Inhaltsverzeichnis

Andere Radio Shack Anrufbeantworter Handbücher

Radio Shack

Radio Shack TAD-732 Bedienungsanleitung

Radio Shack

Radio Shack 43-3822 Bedienungsanleitung

Radio Shack

Radio Shack 900MHz Bedienungsanleitung

Radio Shack

Radio Shack TAD-759 Bedienungsanleitung

Radio Shack

Radio Shack TAD-799 Bedienungsanleitung

Radio Shack

Radio Shack TAD-704 Bedienungsanleitung

Radio Shack

Radio Shack TAD-739 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1018 Bedienungsanleitung

Radio Shack

Radio Shack Digital Telephone Answering Device Bedienungsanleitung

Radio Shack

Radio Shack Digital Answering System with Big Button Trim... Bedienungsanleitung

Radio Shack

Radio Shack TAD-716 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1026 Bedienungsanleitung

Radio Shack

Radio Shack 43-3880 Bedienungsanleitung

Radio Shack

Radio Shack TAD-764 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1006 Bedienungsanleitung

Radio Shack

Radio Shack TAD-222 Bedienungsanleitung

Radio Shack

Radio Shack TAD-795 Bedienungsanleitung

Radio Shack

Radio Shack TAD-285 Bedienungsanleitung

Radio Shack

Radio Shack 43-3808 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1027 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1007 Bedienungsanleitung

Radio Shack

Radio Shack TAD-779 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1024 Bedienungsanleitung

Radio Shack

Radio Shack 43-3801 Bedienungsanleitung

Beliebte Anrufbeantworter Handbücher anderer Marken

AT&T

AT&T 2455 Bedienungsanleitung

Panasonic

Panasonic KX-TG2583CB Bedienungsanleitung

Panasonic

Panasonic KX-TGE820E Bedienungsanleitung

BellSouth

BellSouth GH9488 Sicherheitsleitfaden

GE 2-9985 Bedienungsanleitung

Panasonic

Panasonic KX-TG2631 Bedienungsanleitung

Panasonic

Panasonic KX-TCD961CXB Bedienungsanleitung

Krown

Krown PortaPrinter 2000STD Bedienungsanleitung

AT&T

AT&T 1717 Bedienungsanleitung

Alcatel

Alcatel TEMPORIS 55-CE Bedienungsanleitung

AT&T

AT&T E2562 Bedienungsanleitung

Telstra

Telstra Monitor 420 Bedienungsanleitung

Kortex

Kortex IAM V90 Bedienungsanleitung

Panasonic

Panasonic EASA-PHONE KX-T1451 Bedienungsanleitung

Philips

Philips VOIP8551B/05 Bedienungsanleitung

Topcom

Topcom LUCCA Answering Machine Bedienungsanleitung

Panasonic

Panasonic KX-TGM420 Bedienungsanleitung

Panasonic

Panasonic KX-TCD320E Bedienungsanleitung