Radio Shack TAD-1026 Bedienungsanleitung

Cat. No. 43-786

OWNER’S MANUAL

Please read before usin

this equipment.

TAD-1026

Digital Answering

System Telephone

with Dual Announcements

43-786.fm Page 1 Monday, August 16, 1999 8:02 AM

FEATURES

Your RadioShack TAD-1026 Digital An-

swering System Telephone with Dual

Announcements is a combination multi-

feature telephone and high quality an-

swering system. Your TAD’s remote

control feature lets you retrieve messag-

es from almost any touch-tone phone.

(With an optional pocket tone dialer, you

can even use it from a rotary phone.)

Digital means the TAD stores all mes-

sages on a computer chip — there are

no tape mechanisms to wear out and no

tapes to bother with. This gives you ca-

pabilities that tape-based answering ma-

chines don’t have. For example, you can

delete individual messages.

The TAD-1026’s 14-minute memory ca-

pacity lets you store a lot of messages.

And, its unique, space-saving design

makes it ideal for any office or night-

stand.

Note: Your TAD-1026 requires a 9V bat-

tery for memory backup.

Answering System Features

Dual Out

oin

Messa

e Capacit

—

lets you choose between playing an out-

going message then recording the call-

er’s message, or just playing an

announcement without recording a mes-

sage. And, when the TAD’s memory is

full, it switches automatically to just play-

ing an announcement.

Voice Time/Da

Stamp — announces

the time and day when each message

was recorded.

Two-Wa

Recordin

— lets you record

both sides of your phone conversation.

Call/Messa

e Counter — shows the

current number of messages.

Call Break-Throu

h (CBT) with Pro-

rammable Code — alerts you when

the callerenters a preset code during the

outgoing message.

Redial — dials the last number you di-

aled with the touch of a single button.

Memor

Backup — protects messages

stored in memory in case of a power fail-

ure.

ANSWER Button — lets you turn the

answering system on or off.

DELETE Button — lets you quickly de-

lete messages individually or all at once.

RadioShack is a registered trademark used by Tandy Corporation.

43-786.fm Page 2 Monday, August 16, 1999 8:02 AM

Toll Saver — lets you avoid unneces-

sary long-distance charges when you

call by long-distance to check messag-

es.

Adjustable Ring Number — lets you

set the TAD to answer the phone after

two rings, four rings or seven rings.

Call Screening — lets you listen while

the caller leaves a message so you can

decide whether or not to answer the call.

Phone Pick-Up Detection — stops re-

cording when you pick up any phone on

the same line as the TAD (including the

TAD’s handset), and resets to answer

the next call.

Memo Recording — lets you leave

messages for yourself or others in your

home or office.

Room Monitor — lets you listen from a

remote phone to the room where you in-

stalled the TAD.

Remote On/Off — lets you turn the TAD

on or off when you are away from your

home or office.

Telephone Features

Priority Memory Dialing — lets you

store a phone number in one of three

memory locations and call that number

with the touch of a button.

10 Indirect Memory Locations — let

you quickly dial frequently-called num-

bers.

Flash — sends an electronic switchhook

signal for specialized telephone services

such as Call Waiting.

Privacy — lets you talk to someone else

in the room without being overheard by

the person on the phone.

Pause — lets you store a pause in a

memory number.

TONE Button — lets you use computer-

ized tone services with a pulse line.

Hold — lets you put a call on hold; an in-

dicator lights to remind you the call is on

hold.

Ringer Volume Switch — lets you ad-

just the ringer’s loudness or turn it off.

Handset Volume Control — lets you

adjust the handset’s volume.

Hearing-Aid Compatibility — lets you

use the phone with any hearing aid that

has a T (telephone) switch.

43-786.fm Page 3 Monday, August 16, 1999 8:02 AM

This TAD is ETL listed to UL standards

andmeetsallapplicableFCCstandards.

This symbol is intended to alert you to

the presence of uninsulated danger-

ousvoltage within the product’s enclo-

sure that might be of sufficient

magnitude to constitute a risk of elec-

tric shock. Do not open the product’s

case.

This symbol is intended to inform you

that important operating and mainte-

nance instructions are included in the

literature accompanying this product.

READ THIS BEFORE

INSTALLATION

We have designed your TAD to conform

to federal regulations, and you can con-

nect it to most telephone lines. However,

each device you connect to the phone

line draws power from the phone line.

We refer to this power draw is the de-

vice’s

ringer equivalence number

, or

REN. The REN is on the label on the bot-

tom of the TAD.

If you are using more than one phone or

other device on the line, add up all the

RENs. If the total is more than five (or

three in rural areas), your phone(s)

might not ring and your TAD might not

answer. If ringer operation is impaired,

remove a device from the line.

FCC STATEMENT

Your TAD complies with Part 68 of

FCC

Rules

. You must, upon request, provide

the FCC Registration Number and the

REN to your phone company. Both num-

bers are on the label on the bottom of the

TAD.

You must not connect the TAD to any of

the following:

• Coin-operated systems

• Party-line systems

• Most electronic key phone systems

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

WARNING: To reduce the risk of

fire or shock hazard, do not ex-

pose this product to rain or mois-

ture.

43-786.fm Page 4 Monday, August 16, 1999 8:02 AM

CONTENTS

Installation .............................................................................................................. 7

Installing the Backup Battery ............................................................................. 7

Selecting a Location .......................................................................................... 7

On a Desk Top ............................................................................................ 8

On a Wall Plate ........................................................................................... 8

Directly on a Wall ........................................................................................ 8

Connecting Power ............................................................................................. 9

Connecting the Handset Cord ........................................................................... 9

Setting the Dialing Mode ................................................................................... 9

Setting the Day and Time ................................................................................ 10

Setting the Ringer’s Volume ............................................................................ 11

Telephone Operation ........................................................................................... 12

Setting the Handset Volume ............................................................................ 12

Using REDIAL ................................................................................................. 12

Using FLASH ................................................................................................... 12

Using PRIVACY ............................................................................................... 13

Using HOLD .................................................................................................... 13

Using Tone Services on a Pulse Line .............................................................. 14

Memory Dialing ............................................................................................... 14

Storing a Number in Memory .................................................................... 14

Entering a Pause ...................................................................................... 15

Dialing a Stored Number .......................................................................... 15

Testing Stored Emergency Numbers ........................................................ 15

Chain-Dialing Service Numbers ................................................................ 16

TAD Operation ...................................................................................................... 17

Recording the Outgoing Messages ................................................................. 17

Setting the Number of Rings ........................................................................... 18

Setting the TAD to Answer Calls ..................................................................... 18

To Answer and Record ............................................................................. 18

To Announce Only .................................................................................... 18

Recording Incoming Messages ....................................................................... 19

Screening Calls ............................................................................................... 19

Playing Messages ........................................................................................... 19

43-786.fm Page 5 Monday, August 16, 1999 8:02 AM

Deleting Messages .......................................................................................... 20

Recording a Memo .......................................................................................... 21

Recording a Conversation ............................................................................... 21

Using Call Break-Through ............................................................................... 21

Changing the CBT Code ........................................................................... 22

Changing the Remote Operation Security Code ............................................. 22

Remote Operation ................................................................................................ 24

Remote Answer-On ......................................................................................... 24

Using Remote Commands .............................................................................. 25

Troubleshooting ................................................................................................... 26

Resetting the TAD ........................................................................................... 26

Care and Maintenance ......................................................................................... 27

The FCC Wants You to Know .......................................................................... 28

Lightning .......................................................................................................... 28

43-786.fm Page 6 Monday, August 16, 1999 8:02 AM

INSTALLATION

INSTALLING THE

BACKUP BATTERY

The TAD-1026’s answering system re-

quires AC power to operate. However, if

AC power fails or you unplug the TAD, a

9V backup battery (not supplied) saves

the messages and the settings for the

day, time, and security code. We recom-

mend you use an alkaline battery, such

as RadioShack Cat. No. 23-553.

Caution: Always use a fresh battery of

the required size and recommended

type.

Follow these steps to install the backup

battery.

1. Use a Phillips screwdriver to re-

move the two screws on the battery

compartment cover and remove the

cover

2. Snap the battery connector’s con-

tacts firmly onto the battery, then

place the battery into the compart-

illustration

ment. A1, A2, CL, and 0alternately

appear.

3. Replace the cover.

When the battery is low and needs re-

placing, Lo appears on the display. Be

sure the AC adapter’s cord is plugged in

so you do not lose the TAD’s stored in-

formation, then replace the battery.

Caution: Dispose of old batteries

promptly and properly.

MOUNTING THE TAD

Select a location that is near both a mod-

ular telephone jack and an AC outlet.

Your TAD connects directly to a modu-

lar phone line jack. If the jack is not a

modular jack, you must update the wir-

ing. You can convert the wiring yourself,

using jacks and adapters available at

your local RadioShack store. Or, you

can let the phone company update the

illustration

43-786.fm Page 7 Monday, August 16, 1999 8:02 AM

wiring for you. The USOC number of the

jack to be installed is RJ11C, or RJ11W

for a wall plate jack.

Caution: The supplied adapter supplies

9 volts AC, delivers at least 400 milli-

amps, and has a plug which properly fits

the TAD’s DC 9V jack. Using an adapter

that does not meet these specifications

might damage the TAD or the adapter.

On a Desk Top

Follow these steps when you place the

TAD on a desk, shelf, or table.

1. Plug one end of the supplied long

modular cord into the TEL.LINE jack

on the back of the base.

2. Plug the modular cord’s other end

into a modular phone line jack.

3. Plug one end of the supplied coiled

cord into the jack on the left side of

the TAD-1026. Plug the other end

into the handset’s jack and place

the handset on the TAD.

4. Insert the supplied adapter’s barrel

plug into the DC 9V jack on the back

of the TAD. Then plug the adapter’s

other end into a standard AC outlet.

When you first connect power, the

TAD beeps once and the message

counter counts up from 0 to 10.

Then the TAD beeps. A1, A2, Lo,

CL and 0alternately appear to indi-

cate that no outgoing messages are

recorded, and the day/time stamp is

not set.

4.epsi

DC 9V Jack

illustration

43-786.fm Page 8 Monday, August 16, 1999 8:02 AM

On a Wall Plate

1. Plug one end of the supplied short

modular cord into the TEL. LINE jack

on the top of the TAD.

2. Route the cord into the groove on

the phone’s base.

3. Position the phone’s base close to

the wall plate and plug the other

end of the short modular cord into

the wall plate jack.

4. Align the wall plate studs with the

TAD’s keyhole slots and slide the

TAD downward to secure it.

5. Plug one end of the supplied coiled

cord into the jack on the left side of

the TAD-1026. Plug the other end

into the handset’s jack.

6. Insert the supplied adapter’s barrel

plug into the DC 9V jack on the top

of the TAD. Then plug the adapter’s

other end into a standard AC outlet.

When you first connect power, the

TAD beeps once and the message

counter counts up from 0 to 10.

Then the TAD beeps. A1, A2, CL

and 0alternately appear to indicate

that no outgoing messages are re-

corded, and the day/time stamp is

not set.

7. Slide the handset clip up and out of

its retaining slot, rotate it 180°, then

slide the clip back into its slot. Place

the handset on the TAD.

DC 9V Jack

illustration

7.epsi

43-786.fm Page 9 Monday, August 16, 1999 8:02 AM

Directly on a Wall

For this mounting method, you need two

flat-head wood screws (not supplied)

with heads that fit into the keyhole slots

on the bottom of the TAD.

1. Drill two holes 315/16

inches (100 mm)

apart. Then thread a

screw (not supplied)

into each hole letting

the heads extend

about

3/16 of an inch

(5mm) from the wall.

2. Plug one end of the supplied long

modular cord into the TEL. LINE jack

on the top of the TAD.

3. Plug the cord’s other end into a

modular phone line jack.

4. Align the two screws with the key-

hole slots on the bottom of the TAD.

Slide the TAD down onto the screws

to secure the TAD to the wall.

5. Plug one end of the supplied coiled

cord into the jack on the left side of

the TAD-1026. Plug the other end

into the handset’s jack.

6. Insert the supplied adapter’s barrel

plug into the DC 9V jack on the top

of the TAD. Then plug the adapter’s

other end into a standard AC outlet.

When you first connect power, the

TAD beeps once and the message

counter counts up from 0 to 10.

Then the TAD beeps. A1, A2, CL

and 0alternately appear to indicate

that no outgoing messages are re-

corded, and the day/time stamp is

not set.

7. Slide the handset clip up and out of

its retaining slot, rotate it 180°, then

slide the clip back into its slot. Hang

the handset on the base.

SETTING THE DIALING

MODE

Set T/P (tone/pulse) on the top of the

TAD-1026 for the type of service you

have. If you are not sure which type you

have, do this test.

3/16

315/16

7.epsi

43-786.fm Page 10 Monday, August 16, 1999 8:02 AM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Anrufbeantworter Handbücher

Radio Shack

Radio Shack 43-3888 Bedienungsanleitung

Radio Shack

Radio Shack TAD 3809 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1006 Bedienungsanleitung

Radio Shack

Radio Shack 43-3822 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1018 Bedienungsanleitung

Radio Shack

Radio Shack TAD-222 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1005 Bedienungsanleitung

Radio Shack

Radio Shack 43-3808A Bedienungsanleitung

Radio Shack

Radio Shack TAD-799 Bedienungsanleitung

Radio Shack

Radio Shack 43-3803 Bedienungsanleitung

Radio Shack

Radio Shack TAD-732 Bedienungsanleitung

Radio Shack

Radio Shack TAD -797 Bedienungsanleitung

Radio Shack

Radio Shack Digital Answering System with Big Button Trim... Bedienungsanleitung

Radio Shack

Radio Shack TAD-704 Bedienungsanleitung

Radio Shack

Radio Shack TAD-759 Bedienungsanleitung

Radio Shack

Radio Shack TAD-764 Bedienungsanleitung

Radio Shack

Radio Shack 43-3880 Bedienungsanleitung

Radio Shack

Radio Shack TAD-779 Bedienungsanleitung

Radio Shack

Radio Shack TAD-739 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1007 Bedienungsanleitung

Radio Shack

Radio Shack 14 Minute Bedienungsanleitung

Radio Shack

Radio Shack TAD-285 Bedienungsanleitung

Radio Shack

Radio Shack TAD-716 Bedienungsanleitung

Radio Shack

Radio Shack TAD-716 Bedienungsanleitung

Beliebte Anrufbeantworter Handbücher anderer Marken

AT&T

AT&T 2455 Bedienungsanleitung

Panasonic

Panasonic KX-TG2583CB Bedienungsanleitung

Panasonic

Panasonic KX-TGE820E Bedienungsanleitung

BellSouth

BellSouth GH9488 Sicherheitsleitfaden

GE 2-9985 Bedienungsanleitung

Panasonic

Panasonic KX-TG2631 Bedienungsanleitung

Panasonic

Panasonic KX-TCD961CXB Bedienungsanleitung

AT&T

AT&T 1717 Bedienungsanleitung

Alcatel

Alcatel TEMPORIS 55-CE Bedienungsanleitung

AT&T

AT&T E2562 Bedienungsanleitung

Telstra

Telstra Monitor 420 Bedienungsanleitung

Kortex

Kortex IAM V90 Bedienungsanleitung

Panasonic

Panasonic EASA-PHONE KX-T1451 Bedienungsanleitung

Philips

Philips VOIP8551B/05 Bedienungsanleitung

Topcom

Topcom LUCCA Answering Machine Bedienungsanleitung

Panasonic

Panasonic KX-TGM420 Bedienungsanleitung

Panasonic

Panasonic KX-TCD320E Bedienungsanleitung

TIPTEL

TIPTEL Ergophone 307 Bedienungsanleitung