Radio Shack ET-536 Bedienungsanleitung

Cat. No. 43-1036/1049

OWNER’S MANUAL

Please read before using this equipment.

Cordless Telephone

with 10-Number Memory

ET-536/10-Channel

ET-549/25-Channel

43-1036.fm Page 1 Tuesday, August 17, 1999 9:52 AM

FEATURES

Your RadioShack ET-536 10 Channel/

ET-549 25-Channel Cordless Tele-

phone with 10-Number Memory is de-

signed to exacting standards that

ensure reliability, long life, and out-

standing performance.

Its features include:

10 Channels (ET-536) / 25 Channels

(ET-549) — lets you change to a clear-

er channel during a call to reduce static

interference.

10-Number Memor

Dialin

— lets

you store up to 10 numbers in memory

for easy dialing.

Super CCT Noise-Reduction

Circuitr

— provides clear telephone

conversations, giving you sound clarity

comparable to that of a corded phone.

Securit

Access-Protection Code —

automatically prevents other cordless

phone users from using your phone

line while the handset is off the cradle.

COM-LOK® — ensures that other

cordless phone users cannot use your

phone line when the handset is on the

cradle.

Redial — lets you quickly redial the

last number dialed.

e — lets you send a paging signal

from the base to the handset to page

someone or locate the handset if you

misplace it.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

Pro

rammable Rin

ers — let you

select from four ringer types and

change the type from the handset.

Tone/Pulse Dialin

— lets you use

your phone with tone or pulse service.

Quick Talk — lets you make or an-

swer a call by simply lifting the handset

from the base.

Hearin

-Aid Compatibilit

— lets

you use your phone with hearing aids

that have a T (telephone) switch.

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

We recommend you record your

phone’s serial number here. The num-

ber is on the bottom panel of the base.

Serial Number: __________________

COM-LOK is a registered trademark used by Tandy Corporation

RadioShack is a trademark used by Tandy Corporation.

43-1036.fm Page 2 Tuesday, August 17, 1999 9:52 AM

Important Note: Cordless phones

such as this one require AC power to

operate. When the AC power is off,

you cannot dial out or receive incoming

calls using your ET-536/ET-549. To be

safe, you should also have a phone

that does not need AC power to oper-

ate (not a cordless phone) so you can

still make and receive calls if there is

an AC power failure.

Warning: To prevent fire or shock

hazard, do not expose this product to

rain or moisture.

This symbol is intended to alert you

to the presence of uninsulated dan-

gerous voltage within the product’s

enclosure that might be of sufficient

magnitude to constitute a risk of

electric shock. Do not open the

product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are in-

cluded in the literature accompany-

ing this product.

READ THIS BEFORE

INSTALLATION

Each device that you connect to the

phone line draws power from the

phone line. We refer to this power draw

as the device’s Ringer Equivalence

Number, or REN. The REN is shown

on the bottom of the base.

If you are using more than one phone

or other device on the line, add up all

the RENs. If the total is more than five,

your phones might not ring. In rural ar-

eas, a total REN of three might impair

ringer operation. If ringer operation is

impaired, remove a device from the

line.

FCC STATEMENT

This telephone complies with Part 68

FCC Rules

. You must, upon re-

quest, provide the FCC Registration

Number and the REN to your phone

company. These numbers are located

on the bottom panel of the base.

Note: You must not connect your

phone to any of the following:

• coin-operated systems

• party-line systems

• most electronic key phone sys-

tems

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

CAUTION !

43-1036.fm Page 3 Tuesday, August 17, 1999 9:52 AM

CONTENTS

Installation ............................................................................................................ 5

Selecting a Location ........................................................................................ 5

Placing the Base on a Desk Top ............................................................... 5

Mounting the Base on a Wall Plate ........................................................... 6

Mounting the Base Directly on the Wall .................................................... 8

Connecting and Charging the Battery ............................................................. 9

Setting the Dialing Mode ............................................................................... 11

Setting the Ringer Tone and Volume ............................................................. 11

Operation ............................................................................................................ 12

Making and Receiving Calls .......................................................................... 12

Changing the Channel ....................................................................................12

Using Redial .................................................................................................. 12

Using Flash .................................................................................................... 13

Using Tone Services on a Pulse Line ............................................................ 13

Paging ........................................................................................................... 14

Memory Dialing .............................................................................................. 14

Storing a Number in Memory ...................................................................14

Entering a Pause .................................................................................... 15

Dialing a Memory Number ...................................................................... 15

Chain-Dialing Service Numbers .............................................................. 15

Testing Stored Emergency Numbers ...................................................... 15

Troubleshootin

................................................................................................. 16

Care and Maintenance ....................................................................................... 18

Replacing the Battery .................................................................................... 19

The FCC Wants You to Know ........................................................................ 20

Lightning ........................................................................................................ 20

43-1036.fm Page 4 Tuesday, August 17, 1999 9:52 AM

INSTALLATION

SELECTING A LOCATION

You can place the phone on a desk top

or table, or mount it on a wall. Select a

location that is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls

or filing cabinets, wireless inter-

coms, alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of

several locations, try each to see

which provides the best performance.

Caution: The supplied RadioShack

adapter was designed specifically for

your ET-536/ET-549. Use only the

supplied adapter.

Notes:

• Your telephone connects directly

to a modular telephone line jack. If

your phone line jack is not a mod-

ular jack, you can update the wir-

ing yourself, using jacks and

adapters available at your local

RadioShack store. Or, you can let

the phone company update the

wiring for you.

• The phone company will charge

you for the installation of neces-

sary jacks.

• The USOC number of the jack to

be installed is RJ11C (RJ11W if

you want to mount it on a wall

plate).

Placing the Base

on a Desk Top

Follow these steps when you place

the base on a desk, shelf, or table.

1. Plug one end of the supplied mod-

ular cord into the TEL LINE jack on

the back of the base.

2. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

43-1036.fm Page 5 Tuesday, August 17, 1999 9:52 AM

3. Route the adapter’s cord through

the strain relief slot on top of the

base.

4. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

5. Plug the modular cord’s other end

into a modular phone line jack.

6. Fully extend the base’s antenna

and place it in a vertical position.

Mounting the Base

on a Wall Plate

1. Plug one end of a short modular

cord (such as Cat. No. 279-390,

not supplied) into the TEL LINE

jack on the back of the base.

2. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

43-1036.fm Page 6 Tuesday, August 17, 1999 9:52 AM

3. Route the modular cord through

the top groove and the adapter

cord through both grooves on the

bottom of the base.

4. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

5. Plug the short modular cord’s

other end into the wall plate jack,

then align the base’s keyhole slots

with the wall plate studs and slide

the base downward to secure it.

6. Press and lift out the handset

holder, rotate it 180°, then snap it

back into place so it holds the

handset.

7. Fully extend the base’s antenna

and place it in a vertical position.

Top

Groove

Both

Grooves

43-1036.fm Page 7 Tuesday, August 17, 1999 9:52 AM

Mounting the Base

Directly on the Wall

For this mounting method, you need

two wood screws (not supplied) with

heads that fit into the keyhole slots on

the bottom of the base.

1. Drill two holes 315/16

inches apart. Then

thread a screw into

each hole, letting

the heads extend

about

5/16 inch from

the wall.

2. Plug one end of the supplied mod-

ular cord into the TEL LINE jack on

the back of the base.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

4. Route the modular and adapter’s

cords through both grooves on the

bottom of the base.

5. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

315/16

5/1

Both

Grooves Both

Grooves

43-1036.fm Page 8 Tuesday, August 17, 1999 9:52 AM

6. Plug the cord’s other end into a

modular phone line jack.

7. Align the keyhole slots with the

mounting screws and slide the

base downward to secure it.

8. Press and lift out the handset

holder, rotate it 180°, then snap it

back into place so it holds the

handset.

9. Fully extend the base’s antenna

and place it in a vertical position.

CONNECTING AND

CHARGING THE

BATTERY

The ET-536/ET-549 comes with a re-

chargeable nickel-cadmium battery in-

stalled in the handset. Before using

your phone, you must connect the bat-

tery then charge it for about 14 hours.

1. Remove the screw on the battery

compartment cover on the bottom

of the handset. Press down and

slide off the handset’s battery

compartment cover in the direc-

tion of the arrow.

2. Insert the battery pack’s plastic

connector into the phone’s socket.

The plug fits only one way.

3. Replace the cover and tighten the

screw.

4. To charge the battery, simply

place the handset on the base.

43-1036.fm Page 9 Tuesday, August 17, 1999 9:52 AM

The CHARGE indicator on the base

lights.

Recharge the battery when the BATT

LOW indicator flashes.

Notes:

• If the CHARGE indicator does not

light when you place the handset

on the base, be sure the battery

and AC adapter are correctly and

securely connected.

• When you first use the phone after

charging or recharging the battery,

the phone might not work and you

might hear an error tone. If this

happens, return the handset to

the base for about 5 seconds.

• If the BATT LOW indicator does

not light, but the phone does not

work, recharge the battery. The

battery charge might be too low to

light the indicator.

• If the battery pack gets weak dur-

ing a call, the handset sounds a

beep every 30 seconds, and the

BATT LOW indicator flashes every

3 seconds. If this happens, you

cannot make another call on the

phone until you recharge the bat-

tery.

• About once a month, fully dis-

charge the battery by keeping the

handset off the base until the

BATT LOW indicator lights. Other-

wise, the battery loses its ability to

fully recharge.

• Using a pencil eraser, clean the

charging contacts on the handset

and the base about once a month

to make sure they are not dirty or

tarnished.

• If the battery gets completely dis-

charged, the ET-536/ET-549

loses the security access-protec-

tion code. To reset the security

code, place the handset on the

base and charge the battery.

• The supplied battery should last

for about a year. When the battery

loses its ability to fully recharge,

order a replacement battery from

your local RadioShack store (see

“Replacing the Battery” on Page

19.

43-1036.fm Page 10 Tuesday, August 17, 1999 9:52 AM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 43-5560 Bedienungsanleitung

Radio Shack

Radio Shack 43-143 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller... Bedienungsanleitung

Radio Shack

Radio Shack ET-1126 Bedienungsanleitung

Radio Shack

Radio Shack 43-3514 Bedienungsanleitung

Radio Shack

Radio Shack 43-3577 Bedienungsanleitung

Radio Shack

Radio Shack ET-917 Bedienungsanleitung

Radio Shack

Radio Shack ET-1109 Bedienungsanleitung

Radio Shack

Radio Shack 43-683 Bedienungsanleitung

Radio Shack

Radio Shack ET-1102 Bedienungsanleitung

Radio Shack

Radio Shack Wireless Phone Jack System Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung

Radio Shack

Radio Shack SP-515 Bedienungsanleitung

Radio Shack

Radio Shack ET-596 Bedienungsanleitung

Radio Shack

Radio Shack ET-905 Bedienungsanleitung

Radio Shack

Radio Shack 43-3533 Bedienungsanleitung

Radio Shack

Radio Shack ET-557 Bedienungsanleitung

Radio Shack

Radio Shack ET-2101 Bedienungsanleitung

Radio Shack

Radio Shack 43-3824 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Phone Bedienungsanleitung

Radio Shack

Radio Shack 43-3546 Bedienungsanleitung

Radio Shack

Radio Shack 43-3585 Bedienungsanleitung

Radio Shack

Radio Shack RT-551 Bedienungsanleitung

Radio Shack

Radio Shack 900MHz Hands-free Phone Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung