Radio Shack ET-905 Bedienungsanleitung

Cat. No. 43-1080

OWNER’S MANUAL

900 MHz Cordless Telephone

Please read before using this equipment.

ET-905

43-1080.fm Page 1 Tuesday, August 17, 1999 1:51 PM

FEATURES

Radio Shack is a registered trademark used by Tandy Corporation.

Your Radio Shack ET-905 900 MHz

Cordless Telephone uses the most

advanced analog cordless telephone

technology to give you superior au-

dio quality. It uses the recently allo-

cated 900 MHz band that virtually

eliminates interference caused by

other cordless phones using the

same frequency, while providing

clearer sound and greater range than

46/49 MHz cordless telephones. Its

cordless operation lets you move

freely about your home or office.

Its features include:

900 MHz Operation — provides bet-

ter quality sound (over twice the

range of 46/49 MHz cordless

phones) and less interference than

many other cordless phones.

60 Channels — continuously scans

60 channels (frequency pairs used

between the base and the handset)

and selects the one with the least in-

terference each time you make or re-

ceive a call.

20-Memor

Dialin

—

lets you

quickly dial numbers you have stored

in memory.

DD — lets you quickly dial a number

you stored in direct dial memory by

pressing one button.

stem — lets you send a

signal from the base to the handset

so you can page someone or easily

locate the handset when it is away

from the base.

Privac

— prevents the person on

the other end of the phone line from

hearing your conversation with

someone in the room.

Flash — sends an electronic swich-

hook signal for use with special

phone services such as call waiting.

Redial — lets you quickly dial the last

number dialed.

Pause — lets you store a pause in a

memory number for use with a phone

system that requires an outside ac-

cess number (for example, 9).

Rin

er Volume — adjusts the

base’s ringer volume to three levels

—high, low, or off.

Touch Tone (DTMF) or Pulse Dial-

— lets you use your phone with

either type of dialing.

Hearin

Aid Compatible — lets you

use this telephone with hearing aids

that have a T (telephone) switch.

43-1080.fm Page 2 Tuesday, August 17, 1999 1:51 PM

For your records, we recommend

you record the phone’s serial number

in the space below. The number is on

the base’s label.

Serial Number:

Warning: To prevent fire or shock

hazard, do not expose this product to

rain or moisture.

This symbol is intended to alert

you to the presence of uninsulat-

ed dangerous voltage within the

product’s enclosure that might be

of sufficient magnitude to consti-

tute a risk of electric shock. Do not

open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are in-

cluded in the literature accompa-

nying this product.

READ THIS BEFORE

INSTALLATION

Your telephone conforms to federal

regulations, and you can connect it to

most telephone lines. However, each

device you connect to the phone line

draws power from the phone line. We

refer to this power draw as the de-

vice’s ringer equivalence number, or

REN. The REN is on the label on the

phone base’s back.

If you are using more than one phone

or other device on the line, add up all

the RENs. If the total is more than

five, your phone might not ring. In ru-

ral areas, a total REN of three might

impair ringer operation. If ringer op-

eration is impaired, remove a device

from the line

Important:Cordless phones such as

this one require AC power to operate.

When AC power is off, you cannot

dial out or receive incoming calls us-

ing your ET-905. For this reason, the

ET-905 should not be your only tele-

phone. To be safe, you should also

have a phone that draws its power

from the telephone line (not a cord-

less phone) so you can still make and

receive calls if there is an AC power

failure.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

CAUTION !

43-1080.fm Page 3 Tuesday, August 17, 1999 1:51 PM

FCC STATEMENT

This telephone complies with part 68

FCC Rules

. You must, upon re-

quest, provide the FCC Registration

Number and the REN to your phone

company. These numbers are on the

label on the phone base’s back.

You must not connect your phone to

any of the following:

• Coin-operated systems

• Party-line systems

• Most electronic key phone sys-

tems

Note: Your telephone operates on

standard radio frequencies, as allo-

cated by the FCC. Even though the

access protection code prevents un-

authorized use of your phone line, it

is possible for other radio units oper-

ating on similar frequencies within a

certain area to unintentionally inter-

cept your conversations and/or

cause interference. This lack of pri-

vacy can occur with any cordless

phone.

43-1080.fm Page 4 Tuesday, August 17, 1999 1:51 PM

CONTENTS

Installation ........................................................................................................6

Selecting a Location ....................................................................................6

Setup on a Desktop.....................................................................................6

Mounting Directly on a Wall.........................................................................7

Preparation .......................................................................................................8

Charging the Handset’s Battery...................................................................8

Setting the Pulse/Tone Switch.....................................................................9

Setting the Ringer’s Sound Level ................................................................9

Operation ........................................................................................................10

Answering/Making a Call...........................................................................10

Using Redial ..............................................................................................10

Using Flash................................................................................................10

Using Privacy............................................................................................. 11

Using Tone Services on a Pulse Line ........................................................11

Using Direct Dialing................................................................................... 11

Memory Operation.....................................................................................12

Storing a Number In Memory..............................................................12

Storing a Pause in Memory.................................................................13

Dialing a Stored Number.....................................................................13

Using Page................................................................................................13

Troubleshootin

.............................................................................................14

False Ringing ......................................................................................14

Noise Interference in Your Conversation.............................................14

Telephone is Dead, or No Dial Tone....................................................14

Can Receive But Not Make Calls........................................................14

Phone Still Does Not Work..................................................................14

Alert Tones ..........................................................................................15

Maintenance....................................................................................................16

Replacing the Handset Battery..................................................................17

The FCC Wants You to Know....................................................................18

Lightning....................................................................................................19

43-1080.fm Page 5 Tuesday, August 17, 1999 1:51 PM

INSTALLATION

SELECTING A

LOCATION

You can place the base on a desk,

shelf, or table, or mount it directly on

the wall. The base’s location affects

the phone’s range. If you have a

choice of several locations, try each

to see which one provides the best

performance.

Select a location that is:

• Near an AC outlet

• Near a telephone line jack

• Away from electrical machinery,

electrical appliances, and metal

walls or filing cabinets

• Away from wireless intercoms,

alarms, and room monitors

If the phone line jack is not a modular

jack, you must update the wiring. You

can convert the wiring yourself, using

jacks and adapters available at your

local Radio Shack store. Or, you can

let the phone company update the

wiring for you.

Notes:

• The phone company charges for

the installation of the necessary

jacks.

• The USOC number of the nec-

essary baseboard jack to be

installed is RJ11C.

SETUP ON A DESKTOP

1. Insert the supplied AC adapter’s

barrel plug into the DC 9V jack

on the bottom of the base and

route the wire through the slot

on the back of the base.

(illus)

2. Plug one end of the supplied

modular cord into the LINE jack

on the bottom of the base and

route the wire through the slot

on the back of the base.

(illus)

3. Plug the adapter into a standard

AC outlet.

4. Plug the modular cord’s other

end into a modular phone line

jack.

43-1080.fm Page 6 Tuesday, August 17, 1999 1:51 PM

MOUNTING DIRECTLY

ON A WALL

Mounting the base directly on the

wall requires three screws (not sup-

plied) with heads that fit into the

base’s keyhole slots.

1. Mark the location of the mount-

ing holes using the supplied

template.

2. Drill a hole at each marked loca-

tion, then thread a screw into

each hole, letting the heads

extend 1/8inch from the wall

(about the width of two stacked

pennies).

(illus)

3. Insert the supplied AC adapter’s

barrel plug into the DC 9V jack

on the bottom of the base.

(illus)

4. Plug one end of the supplied

modular cord into the LINE jack

on the bottom of the base.

(illus)

5. Align the keyhole slots with the

mounting screws and slide the

base downward to secure it.

(illus)

6. Plug the adapter into a standard

AC outlet.

7. Plug the modular cord’s other

end into a modular phone line

jack.

(illus)

43-1080.fm Page 7 Tuesday, August 17, 1999 1:51 PM

PREPARATION

CHARGING THE

HANDSET’S BATTERY

You must charge the battery at least

24 hours before you use the phone

the first time or when you replace the

battery. To charge or recharge the

battery, simply place the handset on

the cradle. The CHARGE indicator

lights.

(illus - CHARGE indicator)

Note: If the CHARGE indicator does

not light or blinks continuously when

you place the handset on the cradle,

be sure the battery and AC adapter

are correctly and securely connect-

ed. Also, check the charging con-

tacts on both the handset and base.

If the contacts are dirty or tarnished,

clean them with an eraser.

Recharge the battery when the hand-

set’s BATT LOW indicator lights (see

“Replacing the Handset Battery”).

(illus -

handset’s BATT LOW

indicator)

Notes:

• About once a month, fully dis-

charge the battery. Otherwise, it

will lose its ability to recharge,

and you might have to recharge

and replace it more often.

To fully discharge the battery,

keep the handset off the cradle

until BATT LOW lights. Then

return the handset to the base

and fully recharge the battery.

• Some deeply discharged batter-

ies take longer to charge. If

overnight charging is not suffi-

cient, try charging for up to 48

hours.

43-1080.fm Page 8 Tuesday, August 17, 1999 1:51 PM

SETTING THE PULSE/

TONE SWITCH

Set PULSE/TONE for the type of ser-

vice you have. If you are not sure

which type you have, do this test.

1. Set PULSE/TONE to TONE.

(illus)

2. Press TALK on the handset and

listen for a dial tone.

3. Press any number other than 0.

If the dial tone stops, you have

touch tone service. Leave

PULSE/TONE set to TONE.

If the tone continues, you have

pulse service. Set PULSE/TONE

to PULSE.

SETTING THE

RINGER’S SOUND

LEVEL

The RINGER OFF/LOW/HIGH switch

controls the base’s ringer volume.

(illus)

Set RINGER to OFF when you do not

want the ringer to sound. You can still

make calls, and you can answer a

call if you hear another phone on the

same line ring.

Set RINGER to LOW in a quiet room,

such as a bedroom.

Set RINGER to HIGH in a noisy room,

such as the kitchen.

Note: The handset will not ring if it is

on the base and the base’s ringer is

turned off. However, the handset will

ring if it is away from the base, even

if the base’s ringer is turned off.

43-1080.fm Page 9 Tuesday, August 17, 1999 1:51 PM

OPERATION

ANSWERING/MAKINGA

CALL

To answer a call, if the handset is on

the base, simply lift the handset.

If the handset is not on the base,

press TALK on the handset before

speaking.

(illus -

include the TALK control

and the TALK and

IN USE indicators)

Note: The IN USE indicator flashes

when you receive a call.

To make a call, pick up the handset

and press TALK. When the IN USE

indicator lights steadily and you hear

a dial tone, dial the phone number.

Notes:

• Before you get a dial tone, there

might be a slight delay while the

ET-905 searches through its 60

available channels to find the

clearest one. While the phone

searches, the TALK indicator on

the handset blinks.

• The IN USE indicator on the

base and the TALK indicator on

the handset light steadily while

the phone is in use.

To end a call, place the handset on

the cradle or press TALK again. The

IN USE indicator on the base and the

TALK indicator on the handset turn

off.

USING REDIAL

To redial the last number dialed, lift

the handset, press TALK, then press

REDIAL/PAUSE. The phone automat-

ically dials the last number dialed.

(illus)

USING FLASH

You can use FLASH with special

phone services, such as call waiting.

If you have call waiting, press FLASH

to take an incoming call without dis-

connecting the current call. Press

FLASH again to return to the first call.

(illus)

Note: If you do not have any special

phone services, pressing FLASH

might disconnect the current call.

43-1080.fm Page 10 Tuesday, August 17, 1999 1:51 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Digital Answerer and Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack ET-1104 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1017 Bedienungsanleitung

Radio Shack

Radio Shack ET-1123 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack ET-547 Bedienungsanleitung

Radio Shack

Radio Shack 43-3821 Bedienungsanleitung

Radio Shack

Radio Shack 43-3537 Bedienungsanleitung

Radio Shack

Radio Shack ET-1109 Bedienungsanleitung

Radio Shack

Radio Shack TAD-728 Bedienungsanleitung

Radio Shack

Radio Shack pmn Bedienungsanleitung

Radio Shack

Radio Shack 2-Line 900 MHz Handsfree Cordless Phone Bedienungsanleitung

Radio Shack

Radio Shack 43-3556 Bedienungsanleitung

Radio Shack

Radio Shack 43-3704 Bedienungsanleitung

Radio Shack

Radio Shack ET-908 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack ET-542 Bedienungsanleitung

Radio Shack

Radio Shack 43-5862 Bedienungsanleitung

Radio Shack

Radio Shack 43-329 Bedienungsanleitung

Radio Shack

Radio Shack RT-551 Bedienungsanleitung

Radio Shack

Radio Shack ET-548 Bedienungsanleitung

Radio Shack

Radio Shack ET-1118 Bedienungsanleitung

Radio Shack

Radio Shack 43-324 Bedienungsanleitung

Radio Shack

Radio Shack 43-3814 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung