Radio Shack ET-557 Bedienungsanleitung

Cat. No. 43-1057

OWNER’S MANUAL

25-Channel Cordless Telephone with

Please read before using this equipment.

ET-557

3 Priority and 10 Speed-Dial Memories

43-1057.fm Page 1 Tuesday, August 17, 1999 1:42 PM

FEATURES

COM-LOK and Radio Shack are registered trademarks used by Tandy Corporation.

Your ET-557 25-Channel Cordless

Telephone with 3 Priority and 10

Speed Dial Memories is designed to

exacting standards that ensure reliabil-

ity, long life, and outstanding perfor-

mance.

Its features include:

25 Channels — so you can switch to

the one that provides the least interfer-

ence

Super CCT Noise-Reduction Cir-

cuitr

— provides clear telephone

conversations, giving you sound clarity

comparable to that of a corded phone.

Securit

Access-Protection Code —

automatically sets the first time you

use your phone to prevent other cord-

less phone users from using your

phone line while the handset is off the

cradle.

COM-LOK®— ensures that other

cordless phone users cannot use your

phone line when the handset is on the

cradle.

e— lets you send a paging signal

from the base to the handset to page

someone or locate the handset if you

misplace it.

13-Memor

Automatic Dialin

— lets

you store frequently called numbers

then dial them with the touch of a but-

ton (from three priority dialing memo-

ries), or by entering one of 10 speed-

dial memory location numbers.

Redial — lets you quickly redial the

last number dialed by touching a single

button.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as call waiting.

Volume Control — lets you adjust the

volume of the handset’s ringer/paging

tone and your telephone conversa-

tions.

Tone/Pulse Dialin

— lets you use

your phone with tone or pulse service.

Hearin

-Aid Compatibilit

— lets

you use your phone with hearing aids

that have a T (telephone) switch.

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

43-1057.fm Page 2 Tuesday, August 17, 1999 1:42 PM

Important Note: Cordless phones

such as this one require AC power to

operate. When the AC power is off,

you cannot dial out or receive incoming

calls using your ET-557. To be safe,

you should also have a phone that

does not need AC power to operate

(not a cordless phone) so you can still

make and receive calls if there is an

AC power failure.

For your records, we urge you to

record the serial number of your phone

in the space below. The serial number

is located on the bottom panel of the

base.

Serial Number: __________________

Warning: To prevent fire or shock haz-

ard, do not expose this product to rain

or moisture.

This symbol is intended to alert you

to the presence of uninsulated dan-

gerous voltage within the product’s

enclosure that might be of sufficient

magnitude to constitute a risk of

electric shock. Do not open the

product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are in-

cluded in the literature accompany-

ing this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

CAUTION

43-1057.fm Page 3 Tuesday, August 17, 1999 1:42 PM

READ THIS BEFORE INSTALLATION

Each device that you connect to the

phone line draws power from the

phone line. We refer to this power draw

as the device’s Ringer Equivalence

Number, or REN. The REN is shown

on the bottom of the base.

If you are using more than one phone

or other device on the line, add up all

the RENs. If the total is more than five,

your phones might not ring. In rural ar-

eas, a total REN of three might impair

ringer operation. If ringer operation is

impaired, remove a device from the

line.

FCC STATEMENT

This telephone complies with Part 68

FCC Rules

. You must, upon re-

quest, provide the FCC Registration

Number and the REN to your phone

company. These numbers are located

on the bottom panel of the base.

Note: You must not connect your

phone to any of the following:

• coin-operated systems

• party-line systems

• most electronic key phone sys-

tems

Some cordless telephones operate on

frequencies that may cause interfer-

fence to nearby TVs and VCRs. To

minimize or prevent such interference,

the base of the cordless telephone

should not be placed near or on top of

TVs or VCRs. If interference is experi-

enced, moving the cordless telephone

farther away from the TV or VCR will

often reduce or eliminate the interfer-

ence.

43-1057.fm Page 4 Tuesday, August 17, 1999 1:42 PM

Installation ............................................................................................................ 6

Selecting a Location ........................................................................................ 6

Placing the Base on a Desk Top................................................................ 6

Mounting the Base on a Wall Plate............................................................ 7

Mounting the Base Directly on the Wall......................................................8

Installing and Charging the Battery ................................................................. 9

Setting the Dialing Mode ............................................................................... 11

Setting the Handset’s Volume ....................................................................... 11

Setting the Ringer Tone ................................................................................ 11

Using RINGER ON/OFF ................................................................................ 12

Operation ............................................................................................................ 13

Making and Receiving Calls .......................................................................... 13

Selecting the Channel ................................................................................... 13

Using Redial .................................................................................................. 13

Using Flash ................................................................................................... 14

Using Tone Services on a Pulse Line ........................................................... 14

Paging ........................................................................................................... 15

Memory Dialing ............................................................................................. 15

Storing a Number in Memory .................................................................. 15

Storing a Tone Entry with a Memory Number.......................................... 16

Entering a Pause .................................................................................... 16

Dialing a Memory Number ...................................................................... 16

Chain-Dialing Service Numbers ............................................................. 17

Testing Stored Emergency Numbers ............................................................ 17

Troubleshooting ................................................................................................ 18

Care and Maintenance ...................................................................................... 21

Replacing the Battery......................................................................................22

The FCC Wants You to Know .........................................................................23

Lightning ....................................................................................................... 23

CONTENTS

43-1057.fm Page 5 Tuesday, August 17, 1999 1:42 PM

INSTALLATION

SELECTING A LOCATION

You can place the phone on a desktop

or table, or mount it on a wall. Select a

location that is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls

or filing cabinets, wireless inter-

coms, alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of

several locations, try each to see

which provides the best performance.

Notes:

• Your telephone connects directly

to a modular telephone line jack. If

your phone line jack is not a mod-

ular jack, you can update the wir-

ing yourself, using jacks and

adapters available at your local

Radio Shack store. Or, you can let

the phone company update the

wiring for you.

• The phone company will charge

you for the installation of neces-

sary jacks.

• The USOC number of the jack to

be installed is RJ11C (RJ11W if

you want to mount it on a wall

plate).

Placing the Base on a Desk

Top

Follow these steps when you

place the base on a desk, shelf, or

table.

1. Plug one end of the supplied mod-

ular cord into the TEL. LINE jack

on the back of the base.

2. Plug the modular cord’s other end

into a modular phone line jack.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

43-1057.fm Page 6 Tuesday, August 17, 1999 1:42 PM

4. Route the adapter’s cord through

the strain relief slot on top of the

base.

5. Plug the adapter into a standard

AC outlet.

6. Fully extend the base’s antenna

and place it in a vertical position.

Mounting the Base on a Wall

Plate

1. Plug one end of the supplied mod-

ular cord into the TEL. LINE jack

on the back of the base.

2. Route the modular cord through

the groove on the bottom of the

base.

3. Plug the cord’s other end into a

modular phone line jack.

4. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

5. Route the adapter’s cord through

the strain relief slot on top of the

base and through the groove on

the bottom of the base.

6. Plug the adapter into a standard

AC outlet.

43-1057.fm Page 7 Tuesday, August 17, 1999 1:42 PM

7. Align the base’s keyhole slots with

the wall plate studs and slide the

base downward to secure it.

8. Press and lift out the handset

holder, rotate it 180°, then snap it

back into place so it holds the

handset.

9. Fully extend the base’s antenna

and place it in a vertical position.

Mounting the Base Directly

on the Wall

For this mounting method, you need

two wood screws (not supplied) with

heads that fit into the keyhole slots on

the bottom of the base.

1. Drill two holes 315/16

inches apart. Then

thread a screw into

each hole, letting the

heads extend about

1/5inch from the wall.

2. Plug one end of the supplied mod-

ular cord into the TEL. LINE jack

on the back of the base.

3. Route the modular cord through

the groove on the bottom of the

base.

4. Plug the cord’s other end into a

modular phone line jack.

5. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

43-1057.fm Page 8 Tuesday, August 17, 1999 1:42 PM

6. Route the adapter’s cord through

the strain relief slot on top of the

base and through the groove on

the bottom of the base.

7. Plug the adapter into a standard

AC outlet.

8. Align the keyhole slots with the

mounting screws and slide the

base downward to secure it.

9. Press and lift out the handset

holder, rotate it 180°, then snap it

back into place so it holds the

handset.

10. Fully extend the base’s antenna

and place it in a vertical position.

INSTALLING AND

CHARGING THE

BATTERY

The ET-557 comes with a recharge-

able nickel-cadmium battery. Before

using your phone, you must install the

battery and then charge it for 15-24

hours.

1. Press down and slide off the

handset’s battery compartment

cover in the direction of the arrow.

2. Align the battery pack’s plastic

connector with its socket and plug

it in with the tab up. The plug fits

only one way.

3. Place the battery inside the com-

partment.

4. Replace the cover.

43-1057.fm Page 9 Tuesday, August 17, 1999 1:42 PM

To charge the battery, place the hand-

set on the base in either of two ways:

Upright

Face Down

The CHARGE indicator lights.

Recharge the battery when the TALK/

BATT LOW indicator flashes.

Notes:

• If the CHARGE indicator does not

light when you place the handset

on the base, be sure the battery

and AC adapter are correctly and

securely connected. Also, check

the charging contacts on the

handset and the base. If the con-

tacts are dirty or tarnished, clean

them with a pencil eraser.

• When you first use the phone after

charging or recharging the battery,

the phone might not work and you

might hear an error tone. If this

happens, return the handset to

the base for 5 seconds.

• About once a month, fully dis-

charge the battery by keeping the

handset off the base until the

TALK/BATT LOW indicator lights.

Otherwise, the battery loses its

ability to fully recharge.

• If the TALK/BATT LOW indicator

does not light, but the phone does

not work, recharge the battery.

43-1057.fm Page 10 Tuesday, August 17, 1999 1:42 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack ET-916 Bedienungsanleitung

Radio Shack

Radio Shack 43-3514 Bedienungsanleitung

Radio Shack

Radio Shack 43-3576 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung

Radio Shack

Radio Shack 43-3857 Bedienungsanleitung

Radio Shack

Radio Shack 43-327 Bedienungsanleitung

Radio Shack

Radio Shack 43-3880 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless... Bedienungsanleitung

Radio Shack

Radio Shack ET-926 Bedienungsanleitung

Radio Shack

Radio Shack ET-1106 Bedienungsanleitung

Radio Shack

Radio Shack ET-153 Bedienungsanleitung

Radio Shack

Radio Shack 43-142 Bedienungsanleitung

Radio Shack

Radio Shack RT-551 Bedienungsanleitung

Radio Shack

Radio Shack 43-3887 Bedienungsanleitung

Radio Shack

Radio Shack ET-1109 Bedienungsanleitung

Radio Shack

Radio Shack ET-927 Bedienungsanleitung

Radio Shack

Radio Shack ET-546 Bedienungsanleitung

Radio Shack

Radio Shack 43-143 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller... Bedienungsanleitung

Radio Shack

Radio Shack 43-3535 Bedienungsanleitung

Radio Shack

Radio Shack TAD-734 Bedienungsanleitung

Radio Shack

Radio Shack 43-1088 Bedienungsanleitung

Radio Shack

Radio Shack Big-Button Caller ID Trim Fone 43-3904 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung