Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller... Bedienungsanleitung

Owner’s Manual

Please read before using this equipment.

2.4 GHz Digital Spread

Spectrum Cordless

Telephone

with Call Waiting/Caller ID

2Read This Before Installation

Read This Before Installation

This phone has been tested and found to

comply with all applicable ETL and FCC

standards.

FCC STATEMENT

Your phone complies with Part 68 of

FCC

Rules

. You must, upon request, provide the

FCC registration number and the REN to

your telephone company. Both numbers are

on the bottom of the phone.

Note: You must not connect your phone to:

• coin-operated systems

• party-line systems

• most electronic key telephone systems

We have designed your phone to conform to

federal regulations, and you can connect it to

most telephone lines. However, each phone

(and each device, such as a telephone or an-

swering machine) that you connect to the

telephone line draws power from the tele-

phone line. We refer to this power draw as

the device's ringer equivalence number, or

REN on the bottom of your phone.

If you use more than one phone or other de-

vice on the line, add up all of the RENs. If the

total is more than five (three in rural areas),

your telephones might not ring. If ringer oper-

ation is impaired, remove a device from the

line.

In the unlikely event that your phone causes

problems on the phone line, the phone com-

pany can temporarily discontinue your ser-

vice. If this happens, the phone company

attempts to notify you in advance. If advance

notice is not practical, the phone company

notifies you as soon as possible and advises

you of your right to file a complaint with the

FCC.

Also, the phone company can make changes

to its lines, equipment, operations, or proce-

dures that could affect the operation of this

telephone. The telephone company notifies

you of these changes in advance, so you can

take the necessary steps to prevent interrup-

tion of your telephone service.

Important: Cordless phones such as this

one require AC power to operate. When the

AC power is off, you cannot dial out or re-

ceive incoming calls using your phone. For

this reason, the phone should not be your

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to rain

or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that might

be of sufficient magnitude to con-

stitute a risk of electric shock. Do

not open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature accom-

panying this product.

RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.

Read This Before Installation

only telephone. To be safe, you should also

have a phone that does not require AC pow-

er to operate (not a cordless phone) so you

can still make and receive calls if there is an

AC power failure.

Some cordless phones operate at frequen-

cies that might cause interference to nearby

TVs and VCRs. To minimize or prevent such

interference, the base of the cordless phone

should not be placed near or on top of a TV

or VCR.

Your telephone operates on standard radio

frequencies as allocated by the FCC. Even

though the access protection code prevents

unauthorized use of your phone line, it is

possible for other radio units operating on

similar frequencies within a certain area to

unintentionally intercept your conversations

and/or cause interference. This lack of priva-

cy can occur with any cordless phone.

THE FCC WANTS YOU TO

KNOW

The phone complies with the limits for a

Class B digital device as specified in Part 15

FCC Rules

. These limits provide reason-

able protection against radio and TV interfer-

ence in a residential area. However, your

equipment might cause TV or radio interfer-

ence even when it is operating properly. To

eliminate interference, you can try one or

more of the following corrective measures:

• Reorient or relocate the receiving

antenna.

• Increase the distance between the

equipment and the radio or TV.

• Use outlets on different electrical circuits

for the equipment and the radio or TV.

Consult your local RadioShack store if the

problem still exists.

Lightning

Your telephone has built-in protection circuits

to reduce the risk of damage from surges in

telephone line and power line current. These

protection circuits meet or exceed the FCC

requirements. However, lightning striking the

telephone or power lines can damage your

telephone.

Lightning damage is not common. Neverthe-

less, if you live in an area that has severe

electrical storms, we suggest that you unplug

your phone when storms approach to reduce

the possibility of damage.

IMPORTANT SAFETY

INSTRUCTIONS

When using your telephone equipment, ba-

sic safety precautions should always be fol-

lowed to reduce the risk of fire, electric shock

and injury to persons, including the following:

1. Read and understand all instructions,

2. Follow all warnings and instructions

marked on the product.

3. Do not use liquid cleaners, or aerosol

cleaners. Use a damp cloth for cleaning.

If necessary, use a mild soap.

4. Do not use this product near water, for

example near a bathtub, wash bowl,

kitchen sink, or laundry tub, in a wet

basement, or near a swimming pool.

5. Do not place this product on an unstable

cart, stand or table.The product may fall,

causing serious damage to the product.

6. Do not allow anything to rest on the tele-

phone line cord. Do not locate this prod-

uct where the cord will be abused by

persons walking on it.

7. Never spill liquid of any kind on the prod-

uct.

4Read This Before Installation

8. To reduce the risk of electric shock, do

not disassemble this product. If servic-

ing is required, take it to a qualified ser-

viceman.

9. Disconnect this product from the tele-

phone line and refer to qualified service

personnel under the following condi-

tions.

• If liquid has been spilled into the prod-

uct.

• If the product has been exposed to rain

or water.

• If the product has been dropped or the

cabinet has been damaged.

• If the product exhibits a distinct change

in performance.

• If the product does not operate normally

by following the operating instructions.

Adjust only those controls that are cov-

ered by the operating instructions.

Improper adjustment of controls may

result in damage and require extensive

work by a qualified technician to restore

the product to normal operation.

10. Avoid using a telephone (other than a

cordless type) during an electrical storm.

There may be a remote risk of electrical

shock from lightning.

11. Do not use the telephone to report a gas

leak in the vicinity of the leak.

BATTERY SAFETY

INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF

FIRE OR INJURY, READ AND FOLLOW

THESE INSTRUCTIONS.

1. Do not dispose of the battery pack in a

fire. The cell may explode. Check with

local codes for possible special disposal

instructions.

2. Use only a replacement battery pack of

the required size and type. Use only a

3.6V 600mAh Nickel Metal Hydride (Ni-

MH) battery pack.

3. Do not open or mutilate the battery

pack. Released electrolyte is corrosive

and may cause damage to the eyes or

skin. It may be toxic if swallowed.

4. Exercise care in handling the battery

pack in order not to short the battery

with conductors such as rings, brace-

lets, and keys. The battery pack or con-

ductor may overheat and cause burns.

5. Do not attempt to recharge the battery

pack provided with or identified for use

with this product by heating them. The

battery pack may leak corrosive electro-

lyte or may explode.

6. Do not attempt to rejuvenate the battery

pack provided with or identified for use

with this product by heating it. The bat-

tery pack may release electrolyte, caus-

ing burns or irritation to eyes or skin.

7. When inserting the battery pack into this

product, the proper placement must be

observed. Reverse insertion of the bat-

tery pack can cause charging, and that

may result in leakage or explosion.

8. Remove the battery pack from this prod-

uct if the product will not be used for a

long period of time (several months or

more) since during this time the battery

pack could leak in the product.

9. Discard a dead battery pack as soon as

possible since dead batteries are more

likely to leak in a product.

10. Do not store this product, or the battery

pack provided with or identified for use

Contents

with this product, in high temperature

areas.

11. Batteries that are stored in a freezer or

refrigerator for the purpose of extending

shelf life should be protected from con-

densation during storage and defrosting.

Batteries should be stabilized at room

temperature prior to use after cold stor-

age.

SAVE THESE INSTRUCTIONS

Contents

Features .................................................................................................................................. 6

Installation .............................................................................................................................. 7

Mounting the Phone ............................................................................................................ 7

Connecting, Charging, and Replacing the Battery Pack ..................................................... 7

Setting the Dialing Mode ..................................................................................................... 8

Storing Your Area Code ....................................................................................................... 9

Setting the Ringer Level ...................................................................................................... 9

Using the Belt Clip ............................................................................................................... 9

Operation .............................................................................................................................. 10

A Quick Look at Your Phone ............................................................................................. 10

Adjusting the Handset’s Volume ......................................................................................... 11

Paging ................................................................................................................................ 11

Memory Dialing .................................................................................................................. 11

Storing a Number and Name in Memory ....................................................................... 11

Entering a Pause .......................................................................................................... 12

Reviewing Memory Numbers ........................................................................................ 12

Dialing a Memory Number ............................................................................................ 12

Chain-Dialing Service Numbers .................................................................................... 12

Testing Stored Emergency Numbers ............................................................................ 12

Moving Out of Range ........................................................................................................ 13

Using a Headset ................................................................................................................ 13

Caller ID Operation .............................................................................................................. 13

Important Caller ID Information ......................................................................................... 13

Reviewing Caller ID Messages ......................................................................................... 13

Caller ID Messages ....................................................................................................... 14

Adding/Deleting the Area Code ......................................................................................... 14

Dialing Numbers from a Caller ID Record ......................................................................... 14

Storing a Caller ID Record in Memory ............................................................................... 14

Deleting Caller ID Records ................................................................................................ 14

Troubleshooting ................................................................................................................... 15

Care ................................................................................................................................... 16

6Features

Features

Your RadioShack 2.4 GHz Digital Spread

Spectrum Cordless Telephone uses ad-

vanced technology to give you superior au-

dio quality and extended range. The phone’s

Caller ID unit records each caller’s telephone

number (and name, if available in your area)

and the date and time of the call, as provided

by your local phone company to Caller ID

service subscribers. If you subscribe to Call

Waiting with Caller ID, the phone can show

you the incoming caller information, even

when you are already talking on the phone.

Your phone also has these features:

2.4 GHz Operation — provides longer range

and less interference than many other cord-

less phones.

Spread Spectrum Technology — spreads

the signal across several frequencies, pro-

viding additional security for your phone con-

versations.

40 Channels — automatically selects a clear

channel when you make or answer a call.

10-Number Speed Dialing — lets you store

up to 10 numbers in memory for easy dialing.

Caller ID Memory — stores up to 40 Caller

ID records.

Out-of-Range Signal — the handset lets

you know when you move out of the base’s

operating range.

Ample Talk and Standby Time — the sup-

plied battery pack (when fully charged) pro-

vides about 4 hours of talk time or 7 days of

standby time.

Compact Design — small and easy to hold

in your palm.

Headset Jack — lets you connect an option-

al headset (available from your local

RadioShack store) for handsfree conve-

nience.

Hearing-Aid Compatibility — lets you use

the phone with hearing aids that have a T

(telephone) switch.

Tone/Pulse Dialing — lets you use your

phone with either type of service.

3-Line Backlit Display — lets you view an

entire Caller ID record on one screen even in

the darker environment.

Volume Control — lets you adjust the

volume you hear through the handset.

Adjustable Ringer — lets you choose be-

tween two volume levels or turn the ringer

off.

Belt Clip — lets you carry the phone on your

belt for easy portability.

Installation

MOUNTING THE PHONE

Select a flat surface that is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery, electri-

cal appliances, metal walls or filing cabi-

nets, wireless intercoms, alarms, and

room monitors

• away from other cordless phones

The base’s location affects the handset’s

range. If you have a choice of several loca-

tions, try each to see which provides the best

performance.

Cautions:

You must use a Class 2 power

source that supplies 9V DC

and delivers at least 300 mA.

Its center tip must be set to positive and

its plug must fit the phone's DC 9V 300

mA jack. The supplied adapter meets

these specifications. Using an adapter

that does not meet these specifications

could damage the phone or the adapter.

• Always connect the AC adapter to the

phone before you connect it to AC

power. When you finish, disconnect the

adapter from AC power before you dis-

connect it from the phone.

Your telephone connects directly to a modu-

lar telephone line jack. If your telephone wir-

ing does not have a modular jack, you can

update the wiring yourself using jacks and

adapters (available at your local RadioShack

store), or have the telephone company up-

date the wiring for you. You must use com-

patible modular jacks that are compliant with

Part 68 of

FCC Rules

Note: The USOC number of the jack to be

installed is RJ11C (or RJ11W for a wall plate

jack).

Follow these steps to set up your phone.

1. Plug one end of the supplied modular

cord into the TEL jack on the back of the

base.

2. Insert the supplied AC adapter’s barrel

plug into the DC 9V 300 mA jack on the

back of the base.

3. Plug the modular cord’s other end into

the phone jack.

4. Route the adapter cord through the

strain relief slot on the base then plug

the adapter into a standard AC outlet.

5. Lift the base’s antenna to a vertical posi-

tion.

CONNECTING, CHARGING,

AND REPLACING THE

BATTERY PACK

The phone comes with a rechargeable

nickel-metal hydride (Ni-MH) battery pack

in the handset. Before using your phone,

you must connect the battery pack, then

charge it for about 24 hours.

1. Press down and slide off the battery

pack compartment cover.

2. Lift the battery pack out of the compart-

ment.

3. Plug the battery pack's connector into

the socket in the compartment, (the con-

8Installation

nector fits only one way), replace the

battery pack, and replace the cover.

To charge the battery pack, place the hand-

set on the base. The CHARGE indicator on

the base lights and JejWb0&&

JejWb0&&JejWb0&&

JejWb0&& appears.

Recharge the battery pack when Bemý8Wjj[ho

Bemý8Wjj[hoBemý8Wjj[ho

Bemý8Wjj[ho

flashes on the display.

Notes:

• When you first use the phone after

charging or recharging the battery pack,

the phone might not work and you might

hear a beep when you press TALK.

Return the handset to the base for about

5 seconds to reset the security access-

protection code.

• If the handset or the base loses power,

the security access-protection code

might be lost. To reset the code, return

the handset to the base for about 5 sec-

onds.

• Using a pencil eraser, clean the charg-

ing contacts on the handset and base

about once a month.

• If the battery pack becomes weak during

a call, the handset beeps every 3 sec-

onds and Bemý8Wjj[ho

Bemý8Wjj[hoBemý8Wjj[ho

Bemý8Wjj[ho flashes.

• About once a month, fully discharge the

battery by keeping the handset off the

base until Bemý 8Wjj[ho

Bemý 8Wjj[hoBemý 8Wjj[ho

Bemý 8Wjj[ho flashes. Other-

wise, the battery pack loses its ability to

fully recharge.

• If the display is blank and the phone

does not work, recharge the battery

pack. (The battery power might be too

low to light the display.)

• If you are not going to use your phone

for an extended period of time, discon-

nect the battery pack. This increases the

battery pack's usable life.

The supplied battery pack should last about

a year. If the battery pack does not hold a

charge for more than 2 hours after an over-

night charge, replace it with a new 3.6-volt,

600 mAh battery pack with a connector that

fits the socket in the battery compartment.

You can order a replacement battery pack

through your local RadioShack store. Install

the new battery pack and charge it for about

24 hours.

Warning: Dispose of the old battery pack

promptly and properly. Do not burn or bury it

(see “Battery Safety Instructions” on Page 4

for additional information on proper battery

handling).

SETTING THE DIALING

MODE

To set the dialing mode, set PULSE-TONE on

the back of the base for the type of service

you have. If you are not sure which type you

have, do this test after you charge the hand-

set’s battery pack.

1. Set PULSE-TONE to TONE.

2. Lift the handset, press TALK, and listen

for a dial tone.

3. Press any number other than 0.

Note: If your telephone system requires

that you dial an access code (9, for

example) before you dial an outside

number, do not press the access code

number either.

If the dial tone stops

, you have touch-

tone service. Leave PULSE-TONE set to

TONE.

If the dial tone continues

, you have

pulse service. Set PULSE-TONE to

PULSE.

4. Press TALK or place the handset on the

base to hang up.

Installation

STORING YOUR AREA

CODE

You can store your local area code in the

phone’s Caller ID record so it does not show

the area code if the received call is from your

local area.

Note: If your calling area requires 10-digit di-

aling including area code, do not enter the

area code but leave this option blank.

Follow these steps to store your area code.

1. Lift the handset and press MUTE/PGM.

7H;7ý9E:;

7H;7ý9E:;7H;7ý9E:;

7H;7ý9E:; appears.

2. Enter your three-digit area code.

3. Press MUTE/PGM twice to exit.

SETTING THE RINGER

LEVEL

You can select high or low ringer volume, or

turn the ringer off.

1. Lift the handset and press MUTE/PGM

twice.

H?D=ýB;L;B

H?D=ýB;L;BH?D=ýB;L;B

H?D=ýB;L;B appears with the cursor

pointing to the current setting.

2. Press 6

6/∗

∗∗

∗/TONE or #/7

7to move the

cursor to the desired setting (>?

>?>?

>?, BE

BEBE

BE, or

E<<

E<<E<<

E<<).

3. Press MUTE/PGM.

Note: When you select E<<

E<<E<<

E<<, H_d][hý E\\

H_d][hý E\\H_d][hý E\\

H_d][hý E\\

appears and the phone beeps. You can

still make or receive a call. When you

have an incoming call, the phone con-

nected to the same line rings, and H_d]#

H_d]#H_d]#

H_d]#

_d]

_d]_d]

_d] appears (then Caller ID information,

if you subscribe to the service).

USING THE BELT CLIP

To attach the belt clip, align the clip with the

slots on the sides of the handset, then snap it

into place.

To remove the belt clip, use a flat object such

as a table knife to pry the belt clip off the

phone.

10 Operation

Operation

A QUICK LOOK AT YOUR PHONE

TALK — To make a call, lift the hand-

set and press TALK. J7BA

J7BAJ7BA

J7BA appears,

and the IN USE/PAGE indicator on the

base lights. Enter the number. The

number appears as you dial, then (after

a few seconds) the call’s elapsed time

appears.

You can also enter the number before

you press TALK. If you make a mis-

take, repeatedly press DELETE until

the incorrect entry is erased. Then en-

ter the correct number. Press TALK to

dial the number. The IN USE/PAGE in-

dicator on the base lights. The number

you entered and the call’s elapsed time

appear.

When you receive a call, H_d]_d]

H_d]_d]H_d]_d]

H_d]_d] ap-

pears. To answer, lift the handset from

the base and press TALK. J7BA

J7BAJ7BA

J7BA ap-

pears.

To end a call, press TALK or place the

handset on the base.

REDIAL/PAUSE — You

can quickly dial the last

number you dialed. Lift the

handset and press TALK

then REDIAL/PAUSE. The

phone dials the number.

Notes:

• You can press

REDIAL/PAUSE first

then press TALK to

dial the number in

redial memory.

• Redial memory holds

up to 32 digits, for

redialing long-dis-

tance or local num-

bers.

• Redial memory also

holds pause entries.

FLASH — Performs the electronic

equivalent of a switchhook operation

for special services, such as Call Wait-

ing.

For example, if you have Call Waiting,

press FLASH to answer an incoming

call without disconnecting the current

call. Press FLASH again to return to

the first call.

Note: If you do not have any special

phone services, pressing FLASH

might disconnect the current call.

MUTE/PGM — Press to talk to

someone in the room while using

the phone without the person on

the other end of the phone line

hearing your conversation.

CKJ;

KJ;KJ;

KJ; appears on the display.

Press again to resume your

phone conversation.

6/∗

∗∗

∗/TONE — Some special servic-

es, such as bank-by-phone, require

tone signals. If you have pulse ser-

vice, you can still use these special

tone services by following these

steps.

Be sure PULSE-TONE is set to

PULSE.

Dial the service’s main number.

When the service answers, press

6/∗

∗∗

∗/TONE. Any additional num-

bers you dial are sent as tone signals.

The phone automatically resets to the

pulse mode the next time you make or

receive a call.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack TAD-1015 Bedienungsanleitung

Radio Shack

Radio Shack TAD-729 Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Telephone Bedienungsanleitung

Radio Shack

Radio Shack ET-1112 Bedienungsanleitung

Radio Shack

Radio Shack 43-3857 Bedienungsanleitung

Radio Shack

Radio Shack 43-3556 Bedienungsanleitung

Radio Shack

Radio Shack pmn Bedienungsanleitung

Radio Shack

Radio Shack ET-532 Bedienungsanleitung

Radio Shack

Radio Shack TAD-728 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Digital Answerer and Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack 43-3536 Bedienungsanleitung

Radio Shack

Radio Shack 43-3558 Bedienungsanleitung

Radio Shack

Radio Shack ET-518 Bedienungsanleitung

Radio Shack

Radio Shack ET-548 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Dual Caller... Bedienungsanleitung

Radio Shack

Radio Shack 43-3575 Bedienungsanleitung

Radio Shack

Radio Shack 43-142 Bedienungsanleitung

Radio Shack

Radio Shack 43-3533 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack TAD-268 Bedienungsanleitung

Radio Shack

Radio Shack 43-3577 Bedienungsanleitung

Radio Shack

Radio Shack ET-550 Bedienungsanleitung

Radio Shack

Radio Shack 43-3581 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung