Radio Shack 2-in-1 Remote Control Bedienungsanleitung

Owner’s Manual

Please read before using this equipment.

2-in-1 Universal

Remote Control

2Contents



Contents

Features .................................................................... 3

Introduction .............................................................. 4

Preparation ............................................................... 5

Installing Batteries .................................................. 5

Setting Up Your Remote Control ............................ 6

Operation .................................................................. 8

Converting the CBL Key ........................................ 8

Reassigning the CBL Key .................................. 8

Restoring the CBL Key ...................................... 9

Using Volume Lock ................................................ 9

Setting Volume Lock To Cable Converter .......... 9

Resetting Volume Lock To TV ........................... 9

Cancelling Volume Lock .................................... 9

Manual Code Search ........................................... 10

Checking Your Code ........................................ 10

Manufacturers’ Codes ............................................ 12

Troubleshooting ..................................................... 22

Care ..................................................................... 22

Specifications ......................................................... 23

Features



Features

Your RadioShack 2-in-1 Universal Remote Control al-

lows you to control both your TV and cable converter

with one easy-to-use, compact remote control. Its fea-

tures include:

Last Station Recall — lets you go from the station you

are currently watching to the last one at the touch of a

button.

Large, Easy-to-Use Buttons — improve remote control

access and operation.

+100 Key — lets you access the higher cable channels.

Powerful Infrared Beam — lets you operate your TV or

cable converter from a greater distance than many other

remote controls.

Extensive Code Library — contains remote control

codes for virtually every television and cable converter

made today, including discontinued devices.

For your convenience, the remote control has been pre-

set to control an RCA TV (compatible with code 0047)

and a Jerrold cable converter (compatible with code

0003). To control other brands, you must do some sim-

ple programming after you install three AAA alkaline bat-

teries (not included).

For best results, please read and perform all remaining

instructions. Also, keep these instructions for future ref-

erence.

4Introduction



Introduction

Your Radio Shack 2-in-1 Remote Control was designed

to control the most commonly-used functions on your TV

and cable converter.

When you set up the remote control, its command keys

operate the same as the keys on your original TV and

Cable remote controls. For example, the POWER key

works like the POWER ON/OFF key on your original TV

remote control.

Note: This remote control might not be able to duplicate

some of your original remote control’s seldom-used

functions.

Key Function

PUse to program the remote control.

POWER

VOL +

VOL –

CH +

CH –

LAST

MUTE

ENTER

(0–9)

+ 100

A/B

Operate the same as the corre-

sponding keys on your original

remote controls.

CBL Use to set up the remote control to

replace your original remote con-

trols. Also use in normal operation to

remotely select a desired device to

control.

Preparation



Preparation

INSTALLING BATTERIES

Your remote requires three AAA batteries (not supplied)

for power. For the best performance and longest life, we

recommend RadioShack alkaline batteries.

When batteries become low, the remote control will

cease to operate in order to protect stored settings. Re-

placing the batteries with new ones will restore full func-

tionality and will not require you to reprogram your

remote control.

Cautions:

• Use only fresh batteries of the required size and

recommended type.

• Do not mix old and new batteries, different types of

batteries (standard or alkaline).

• Do not use rechargeable batteries.

• Do not press any of the remote control’s keys while

installing batteries.

1. Press the battery compartment cover’s tab and lift

off the cover.

2. Place the batteries in the compartment as indicated

by the polarity symbols (+ and –) marked inside.

3. Replace the cover.

When the remote control’s range decreases or it stops

operating properly, replace the batteries.

Warning: Dispose of old batteries promptly and proper-

ly. Do not burn or bury them.

Caution: If you do not plan to use the remote control for

a month or longer, remove the batteries. Always remove

old or weak batteries. Batteries can leak chemicals that

can destroy electronic parts.

6Preparation

Note: Do not place objects on top of the remote control

after you have installed the batteries. Doing so might de-

press keys for an extended period of time and reduce

the battery life.

SETTING UP YOUR REMOTE

CONTROL

You can use the remote control’s device keys to control

the following types of devices:

TV – TVs

CBL – Cable converters

Your remote control is preset to an RCA TV (compatible

with code 0047) and a Jerrold cable converter (compati-

ble with code 0003). Not all RCA TVs and Jerrold cable

converters will work with the preset codes. Some will re-

quire the other codes listed in Manufacturer’s Codes.

Follow these steps to control other brand devices or to

use a different RCA or Jerrold code.

1. Refer to “Manufacturers’ Codes” on Page 12 and

write down the codes for the brand of device you

want to program on the supplied label.

Note: Some manufacturers might have several

codes listed. Try each until you find the right one. If

you cannot find the correct code, try performing a

manual search (see “Manual Code Search” on

Page 10).

2. Turn on your TV (or cable converter).

3. Press TV (or CBL).

4. Hold down Puntil the red light blinks twice, then

enter the 4-digit manufacturer’s code for the desired

device. When the red light blinks twice, the remote

control has accepted the code.

For example, to set up the remote control of a Pana-

sonic TV (manufacturer’s code 0051), press TV,

hold down Puntil the red light blinks twice, then

press

0051.

Preparation

Note: If you entered the code incorrectly, the red

light blink once.

5. Point the remote control at your TV (or cable con-

verter) and press POWER. The device should turn

off.

If the remote does not operate your device, try the

other codes listed in “Manufacturers’ Codes” on

Page 12 for your brand of TV or cable converter.

You can also search to find a working code (see

“Manual Code Search” on Page 10).

6. Repeat Steps 2–5 to program the other device

(cable converter or TV).

8Operation



Operation

The command keys on the remote control work the

same way as their counterpart keys on the original re-

mote controls. However, they might be labeled different-

ly.

1. Point the remote control at the device you want con-

trol and press its device key (TV or CBL). Then

press

POWER to turn on the device.

2. Press the desired command keys.

3. Repeat Steps 1 and 2 for the other device you want

to operate.

4. To turn off the last device you selected, press

POWER. To turn off the remaining device, press its

device key, then press POWER.

CONVERTING THE CBL KEY

If you are not using CBL, you can reprogram it to operate

a second TV.

Reassigning the CBL Key

1. Hold down Puntil the red light blinks twice.

2. Press 992. The red light blinks twice.

3. Press TV.

4. Press CBL. The red light blinks twice to indicate suc-

cessful programming.

5. Program the converted CBL key with the code for

the second TV (see “Setting Up Your Remote Con-

trol” on Page 6).

Now each time you press CBL, you can control the sec-

ond TV by pressing the desired function keys.

Operation

Restoring the CBL Key

When you are finished using your second TV, you can

restore the CBL key to control a cable converter.

1. Hold down Puntil the red light blinks twice.

2. Press 992. The red light blinks twice.

3. Press CBL.

4. Press CBL again. The red light blinks twice to indi-

cate successful programming.

USING VOLUME LOCK

Volume Lock is preset so that pressing VOL+/– or MUTE

only controls your TV’s volume, even if you press CBL. If

your cable converter has a volume control, you can

change this setting to add control of the cable convert-

er’s volume.

Setting Volume Lock To Cable Converter

1. Hold down Puntil the red light blinks twice.

2. Press 993. The red light blinks twice.

3. Press CBL. The red light blinks twice.

To control your cable converter’s volume, press CBL

then VOL +/–.

Resetting Volume Lock To TV

1. Hold down Puntil the red light blinks twice.

2. Press 993. The red light blinks twice.

3. Press TV. The red light blinks twice.

Cancelling Volume Lock

1. Hold down Puntil the red light blinks twice.

2. Press 993. The red light blinks twice.

10 Operation

3. Press VOL+. The red light blinks four times.

MANUAL CODE SEARCH

If your TV or cable converter does not respond to remote

control commands after trying all of the codes listed for

your brand, or if your brand is not listed at all, try search-

ing for your code.

1. Turn on your TV or cable converter.

2. Press TV (or CBL)once.

3. Hold down Puntil the red light blinks twice.

4. Press 991. The red light blinks twice.

5. Aim the remote control at the TV or cable converter

and slowly alternate between pressing POWER and

TV (or CBL). Stop when the TV or cable converter

turns off. A working code has been found.

Note: The remote control sends codes from its

extensive library to the selected device, starting with

the most popular codes first. Because of the

library’s size, this procedure may take some time.

When the red light blinks twice, the search of every

code is complete.

6. Press Ponce to lock in the code.

Note: If the TV turns off during the search, but does

not operate after you lock in the code, begin the

search again, pausing longer between key presses.

Checking Your Code

If you set up the remote control using the “Manual Code

Search” procedure, follow these steps to find out what

code is operating your TV or cable converter.

1. Press TV or CBL once.

2. Hold down Puntil the red light blinks twice.

3. Press 990. The red light blinks twice.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Fernbedienung Handbücher

Radio Shack

Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE Bedienungsanleitung

Radio Shack

Radio Shack 63-1166 Bedienungsanleitung

Radio Shack

Radio Shack Kameleon Bedienungsanleitung

Radio Shack

Radio Shack Wireless Security Keychain Remote Bedienungsanleitung

Radio Shack

Radio Shack Keychain Bedienungsanleitung

Radio Shack

Radio Shack Remote Control Bedienungsanleitung

Radio Shack

Radio Shack Univer 15-2138 Bedienungsanleitung

Radio Shack

Radio Shack Audio/ Video Remote Control Bedienungsanleitung

Radio Shack

Radio Shack TOUCHSCREEN REMOTE Bedienungsanleitung

Radio Shack

Radio Shack 15-303 Bedienungsanleitung

Radio Shack

Radio Shack 15-1995 Bedienungsanleitung

Radio Shack

Radio Shack 15-309 Bedienungsanleitung

Radio Shack

Radio Shack Light and Learn Remote Bedienungsanleitung

Radio Shack

Radio Shack 15-1925 Bedienungsanleitung

Radio Shack

Radio Shack Kameleon Bedienungsanleitung

Radio Shack

Radio Shack 15-1915B Bedienungsanleitung

Radio Shack

Radio Shack 15-310 Bedienungsanleitung

Radio Shack

Radio Shack 15-1931 Bedienungsanleitung

Radio Shack

Radio Shack 15-2147 - Universal Remote Bedienungsanleitung

Radio Shack

Radio Shack 15-1990 Bedienungsanleitung

Radio Shack

Radio Shack 15-2146 - Voice Prompt Universal Remote Bedienungsanleitung

Radio Shack

Radio Shack 6-in-1 Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 8-IN-ONE REMOTE Bedienungsanleitung

Radio Shack

Radio Shack 7-in-1 Remote Control with Lighted Keypad Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung