Radio Shack 15-310 Bedienungsanleitung

15-310

User’s Guide

Big Button

Universal Remote Control

Thank you for purchasing your Big Button Universal

Remote Control from RadioShack. Please read this

user’s guide before installing, setting up, and using your

new remote control. 1/3

Package Contents

Features

• Operatesuptothreedevices

• Largeeasy-to-seebuttons

1Install the Batteries

1. Removethebatterycover.

2. InserttwoAAAbatteries(notincluded)bymatching

thepolaritysymbols(+/–)markedinside.

3. Replacethebatterycover.

AAA

User’s

Guide

Code List

Remote

control

MUTE

Turnoffthesound

•Displaythemenufor

theselecteddevice

•Inmenus,activate

anddeactivatesthe

alternativefunction

ofthemulti-function

keys.

SET

Activatesetupforthe

remote

CH +/–

Selectthenextor

previouschannel

0-9

Directlyenterchannels

–

Accesssubchannels

onaTVorreceiver

Red LED

ASPECT

Changeviewing

options(4:3or16:9)

Turnonoroffaselected

device

Device Keys

Selectadevicetocontrol

VOL +/–

Adjustthevolume

ENTER

Presstoenterthechannel

number

Multi-function keys

•ControlyourVCRorDVD

player

•Inmenus,thekeysstand

forleft(),up(),right

(),OK(),down()

andexit()

•Keysreturntotheir

originalfunctionifnokeys

arepressfor10sec.

2Setup

YouruniversalremotecanoperateaTV,VCR,DVD,cable

orsatellite.

Setupyouruniversalremoteinoneofthreeways:

• Brand Code Setup: Directlyenterthedevicecode

fromtheCodeList.Tryeachcodeuntilyoundone

thatworksforyourdevice.

• Auto Code Search: Youruniversalremote

automaticallygoesthroughallthedevicecodes.

(Thismethodcantakeupto45minutestosearchall

thecodesforthe3devices.)

• Manual Code Search: Manuallygoesthrougheach

codeforyourdeviceonebyoneatthetouchofthe

G button.

n Note:

Keep your remote pointed at the device that

you want to program throughout setup.

Brand Code Setup

1. Poweronthedevicethatyouwanttocontrol.

2. Findthecode(orcodes)foryourdeviceinthe

includedCode List.Ifyourdevice’sbrandisnot

listed,usethe Auto Code Search orManual Code Search

method.

3. Onyouruniversalremote,pressandholdSET,and

thenpressadevicekey(TV,VCR/DVDorSTB/CBL).

TheredLEDlightsandstayslit,indicatingthatthe

remoteisinsetupmode.Releasebothbuttons.

n Note: Do not hold down the keys for longer

than three seconds or the remote enters auto search

mode.

4. Entertherst3-digitcodeforyourdeviceandbrand.

Pausebrieybetweeneachdigittomakesurethe

remotereceivesallinputs.TheredLEDashes

wheninputisreceived,thenturnsoffifyouentered

therightcode.IftheredLEDstayslit,enterthe

nextcodeforyourdeviceandbrand.Repeatforall

possiblecodesuntiltheredLEDturnsoff.

5. Verifythesetupbytestingtheremotecontrol’s

buttonsandfunctions.Ifsomeofyourdevice’s

functionsdonotrespondtotheremote,repeatsteps

3-5withanothercode.

nNotes:

• Ifyouwanttoquitduringdevicesetup,pressthe

device key or wait 10 seconds for the remote to exit

setup automatically.

• Ifyouareuncertainaboutyour3-digitcodeentry,

follow “Check Current Brand Code” on page 9 to conﬁrm

your code.

• Ifyou’vetriedallthecodesforyourdeviceinthe

Code List and your universal remote still does not

work, follow steps for Auto Code Search or Manual Code

Search.

Auto Code Search

AutoCodeSearchautomaticallysendsdevicecodesto

thedevicethatyouwanttocontrol.

1.

Poweronthedevicethatyouwanttocontrol.For

VCRsandDVDplayers,youmustinsertatapeordisc.

2.

Onyouruniversalremote,pressandholdSET,then

pressandholdadevicekey(TV,VCR/DVDorSTB/

CBL).Continuetoholddownbothkeysformorethan

threeseconds.TheredLEDashesandtheuniversal

remotestartssearching.Releasebothbuttons.

3. Whenthedevicerespondsinanyway(switches

off,play,pause,volumechange,channelchanges),

pressanykeyotherthanSETwithintwosecondsto

conrmthecode.TheredLEDwillstopashing.

4. Verifythesetupbytestingvariouskeysand

functions.PressGonyouruniversalremotetoturn

onthedeviceifitturnedoffinstep3.Ifsomeofyour

device’sfunctionsdonotrespondtotheremote,

repeatsteps2-4.

nNotes:

• BecauseAutoCodeSearchrequiresyoutostopthe

search, you must remain with the device during the

process.

• Tostopsearching,pressanykey(exceptSET). The

red LED light turns off and the search stops.

• Duringasearch,youcanpressSET to change search

direction from forward to backward or vice versa.

Manual Code Search

ManualCodeSearchsendscodestothedeviceyouwant

tocontrolonebyoneatthetouchoftheGbutton.

1. Poweronthedevicethatyouwanttocontrol.For

VCRsandDVDplayers,youmustinsertatapeor

disc.

2. Ontheuniversalremote,pressandholdSET,then

pressadevicekey(TV,VCR/DVDorSTB/CBL).The

redLEDlightsupandstayslit,indicatingtheremote

isinsettingmode.Releasebothbuttons.

n Note: Do not hold down the keys for longer

than three seconds or the remote enters auto search

mode.

3. PressGontheuniversalremote.Theuniversal

remoteentersmanualcodesearchmodeandthe

redLEDashes.

4. PressGrepeatedlyonyouruniversalremoteuntil

thedeviceturnsoff.(EachpressoftheGkeysends

adifferentcodetoyourdevice.)

Whenthedeviceturnsoff,thecodeiscorrect.Press

thedevicekeyonyouruniversalremotewithin10

secondstoconrmthecode.

5. PressG onyouruniversalremotetoturnyourdevice

backon.

6. Verifythesetupbytestingvariouskeysandfunctions.

Ifsomeofyourdevice’sfunctionsdonotrespondto

theremote,repeatsteps2-6.

nNotes:

• Duringasearch,youcanpressSET to change search

direction from forward to backward or vice versa.

• Ifnokeysarepressedin10seconds,searchstops.

Operation

Check Current Brand Code

Forfuturereferenceandtosavetimeifyoueverneed

tosetupyourremoteagain,retrieveandwritedown

yourdevicecodesforeachdevicekeyonyouruniversal

remote.



Completethefollowingstepstocheckthecodenumber

foraspecicdevice.TheredLEDonyouruniversal

remotewillashtoindicatethecodes.

1. Pressthedevicekeyonyouruniversalremote.

2. Tochecktherstdigit,pressandholdSET,then

pressnumericalkey1.TheredLEDwillash

repeatedlytoindicatetherstdigit.(oncefor1,

twicefor2,etc.IftheredLEDdoesnotash,this

indicatesthattherstdigitis“0.”)

3. Tochecktheseconddigit,pressandholdSET,then

press 2.TheredLEDwillashrepeatedlytoindicate

theseconddigit.

4. Tocheckthethirddigit,pressandholdSET,then

press3.TheredLEDwillashrepeatedlytoindicate

thethirddigit.

Lock Device

Lockthedevicecodeinyourremotesoitdoesn’tget

changedordeletedunintentionally.

To lock in the code for your current device:

1. Pressthedevicekeythatyouwanttolockonyour

universalremote.

2. HolddownSET,thenpress7.TheredLEDblinks

twice.Thecodeforthecurrentdeviceisnowlocked

andcannotbeoverwritten.

3. Tounlockthecurrentdevicekey,pressandholdSET,

thenpress8.TheredLEDblinkstwice.

nNote:

• Thelockeddevicescannotbechangeduntilyou

unlock the current device key or reset your remote.

• Tounlockacodeotherthanthecurrentone,pressthat

devicekeybeforefollowingstep3.

Inhaltsverzeichnis

Andere Radio Shack Fernbedienung Handbücher

Radio Shack

Radio Shack 150-2114 Bedienungsanleitung

Radio Shack

Radio Shack 4 Bedienungsanleitung

Radio Shack

Radio Shack 8-IN-ONE REMOTE Bedienungsanleitung

Radio Shack

Radio Shack Keychain-Remote Control System Bedienungsanleitung

Radio Shack

Radio Shack 15-1931 Bedienungsanleitung

Radio Shack

Radio Shack Audio/ Video Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 15-1995 Bedienungsanleitung

Radio Shack

Radio Shack 15-2147 - Universal Remote Bedienungsanleitung

Radio Shack

Radio Shack Kameleon 4-in-1 Bedienungsanleitung

Radio Shack

Radio Shack 63-1166 Bedienungsanleitung

Radio Shack

Radio Shack 15-303 Bedienungsanleitung

Radio Shack

Radio Shack Keychain Bedienungsanleitung

Radio Shack

Radio Shack Kameleon 4-in-1 Bedienungsanleitung

Radio Shack

Radio Shack Kameleon Bedienungsanleitung

Radio Shack

Radio Shack 15-1915B Bedienungsanleitung

Radio Shack

Radio Shack 7-in-1 Remote Control with Lighted Keypad Bedienungsanleitung

Radio Shack

Radio Shack 15-2146 - Voice Prompt Universal Remote Bedienungsanleitung

Radio Shack

Radio Shack TOUCHSCREEN REMOTE Bedienungsanleitung

Radio Shack

Radio Shack 6-in-1 Remote Control Bedienungsanleitung

Radio Shack

Radio Shack 15-309 Bedienungsanleitung

Radio Shack

Radio Shack Remote Control Bedienungsanleitung

Radio Shack

Radio Shack Kameleon Bedienungsanleitung

Radio Shack

Radio Shack 2-in-1 Remote Control Bedienungsanleitung

Radio Shack

Radio Shack Wireless Security Keychain Remote Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung