Raycus RFL-P20QE Bedienungsanleitung

编号

RFL-P10Q～P50QB

密级

阶段标记

页数

名称

RFL-P10Q/P20Q/P30Q/P20QE/P50QB

脉冲光纤激光器英文使用说明书

会签

单位

第二事业部

编写

李科

校对

朱军

审核

施建宏

标审

李其军

批准

黄保

武汉锐科光纤激光技术股份有限公司

User’s guide Ytterbium Pulsed Fiber Laser RFL-P10Q/P20Q/ P30Q/ P20QE/P50QB Ver.: 2.0

Ytterbium Pulsed Fiber Laser

User’s Guide

RFL-P10Q

RFL-P20QE

RFL-P20Q

RFL-P30Q

RFL-P50QB

Wuhan Raycus Fiber Laser Technologies Co., Ltd.,2018

Issued 19 October 2018

User’s guide Ytterbium Pulsed Fiber Laser RFL-P10Q/P20Q/ P30Q/ P20QE/P50QB Ver.: 2.0

Safety Information

Please read this instruction carefully and familiarize yourself with the information we have

provided before you use the product. In this brochure, important operation procedures, safety and

other information are provided for you and all future users. In order to ensure operating safely

and optimal performance of the product, please do according to following warnings, cautions and

other information.

Raycus pulsed fiber laser is classified as a high power Class IV laser device. Before supplying

the power to the device, please make sure that the correct voltage of 24VDC power source is

connected and the anode and cathode are right. Failure to connect power source correctly will

cause damage to the device.

The device emits invisible 1060~1085nm wavelength light with average power 10W～50W.

Do not expose your eyes or skin to the radiation of the laser.

Do not take apart the device, because there are no replaceable accessories available for users

to use. Any maintenance can only be proceeded in Raycus.

Do not look into the light output end directly. Use appropriate laser safety eyewear when

operating the device.

Safety labels and locations

The two labels above is located on the top of the cover of the device, representing laser

radicalization.

User’s guide Ytterbium Pulsed Fiber Laser RFL-P10Q/P20Q/ P30Q/ P20QE/P50QB Ver.: 2.0

Content

1. Description.............................................................................................1

1.1. Product description........................................................................................................1

1.2. Actual configuration list ................................................................................................1

1.3. Environmental requirements and cautions.....................................................................1

1.4. Specifications.................................................................................................................2

2. Mounting................................................................................................3

2.1 Mounting dimensions ....................................................................................................3

2.2 Method of installation....................................................................................................3

3. Control Interface...................................................................................5

4. Operation Regulations..........................................................................8

4.1 Pre-inspection ................................................................................................................8

4.2 Operation procedures.....................................................................................................8

4.3 Cautions.........................................................................................................................8

5. Instructions for warranty, return and maintenance..........................9

5.1 General warranty ...........................................................................................................9

5.2 Limitations of warranty .................................................................................................9

5.3 Service and repairs.........................................................................................................9

User’s guide Ytterbium Pulsed Fiber Laser RFL-P10Q/P20Q/ P30Q/ P20QE/P50QB Ver.: 2.0

1/ 9

1. Description

1.1. Product description

Raycus pulsed laser is an ideal high power laser source with high speed and high efficiency. It is

specially designed for industrial laser making system and other applications.

Compared with traditional lasers, pulsed laser has some unique advantages in increasing the

conversion efficiency of the pump light 10 times higher. Its low power consumption and

automotive design make it appropriate for operating both in and outside the lab. Besides, it is

exquisite and convenient for its independence in placement, free time in using and facility in

connecting to equipment directly.

The device can emit 1060~1085nm wavelength pulsed light under the control of industrial

laser’s standard interface driven by 24VDC power source.

1.2. Actual configuration list

Table 1. Configuration list

Items

Quantity

Remark

Fiber Laser module

1.3. Environmental requirements and cautions

Pulsed laser should be driven by 24VDC±1V power source.

1) Caution: Make sure the corresponding wires of the device are properly grounded.

2) All the maintenance to the device should only be done by Raycus, because there is no

replacement or accessory provided with the device. Please do not try to damage the labels or

open the cover in order to prevent against electric shock, or the warranty will be invalid.

3) The output head of the product is connected with an optical cable. Please be careful handling

the output head. Avoid dirt and any other contaminations. Please use the specialized lens

paper when cleaning the lens. Please lid the laser with protective cover of the light isolator to

be against dirt only when the laser is not installed in the device or not in working.

4) If the operating the device fails to follow this instruction, the protective function will be

weakened. Therefore, it should be used under normal conditions.

5) Do not install the collimating device into the output head when the laser device is in working.

User’s guide Ytterbium Pulsed Fiber Laser RFL-P10Q/P20Q/ P30Q/ P20QE/P50QB Ver.: 2.0

2/ 9

6) The device has three cooling fans at the rear panel to dissipate heat. In order to guarantee

enough airflow to help giving heat off, there must be a space of at least 10 cm’s width for

airflow in front and rear side of the device. As the cooling fans are working at blow condition,

if laser is mounted in a cabinet with fans, the direction should be same as laser’s fans.

7) Do not look into the output head of the device directly. Please do wear appropriate laser

safety eyewear during the time when operating the device.

8) Make sure the pulse repetition rate higher than 20 kHz.

9) For the longest time without pulse is only 100 us. If there is no pulse output, please stop

marking at once, to avoid further damage of the device.

10) Power source sudden interruption will do great harm to the laser device. Please make sure

the power supply works continuously.

1.4. Specifications

Table 2. 10Q、20QE、20Q、30Q、50QB pulsed fiber laser specifications

Pulsed fiber laser

10Q 20QE

20Q

30Q 50QB

Wavelength（nm）1060~1085 1060~1085 1060~1085 1060~1085 1060~1085

Polarization

Random Random Random Random Random

Optical isolator

Yes Yes Yes Yes Yes

Nominal average output power (W)

≥

Single pulse energy (mJ)

1@20kHZ 0.66@30kHZ 1@20kHZ 1@30kHZ 1@50kHz

Beam quality（M2）<1.5 <1.5 <1.5 <1.5 <1.6

Beam Diameter（mm）6～8 6～8 6～8 6～8 6～8

Pulse duration（ns）80-100@20kHZ 115-140@30kHZ 90-130@20kHZ 90-130@30kHZ 90-150@50kHz

Pulse repetition rate（kHz）20-60 30-60 20-60 30-60 50-100

Output Power Tunability（%）

10-100 10-100 10-100 10-100 10-100

Output Fiber Cable length（m

）

2.0

Working voltage（VDC）24±1 24±1 24±1 24±1 24±1

Power consumption（

℃）（

W）

120

170

240

340

Cooling

Forced Air Cooled

Dimension W×D×H（mm）

260×391×120

Operating temperature（℃）0℃～40℃0℃～40℃0℃～40℃0℃～40℃0℃～40℃

Store temperature（℃）-20℃～60℃-20℃～60℃-20℃～60℃-20℃～60℃-20℃～60℃

humidity（%）≤80 ≤80 ≤80 ≤80 ≤80

User’s guide Ytterbium Pulsed Fiber Laser RFL-P10Q/P20Q/ P30Q/ P20QE/P50QB Ver.: 2.0

3/ 9

2.Mounting

2.1 Mounting dimensions

1) Fiber Laser module dimensions (As shown in Fig. 1).

Figure 1. Dimension drawing of laser module (Unit: mm).

2) Isolated output head dimensions (As shown in Fig. 2).

Figure 2. Dimension drawing of output isolator (Unit: mm).

2.2 Method of installation

1) Fix the module stable to the bracket and keep the laser in good ventilation.

2) Connect the power line to 24VDC power and ensure enough DC output power. Keep it clear

User’s guide Ytterbium Pulsed Fiber Laser RFL-P10Q/P20Q/ P30Q/ P20QE/P50QB Ver.: 2.0

4/ 9

to the polarity of the electric current: anode-brown; cathode-blue; PE-yellow and green. The

definition figure is shown in Fig. 3.

Figure 3. Definition of power line wires

3) Make sure that the interface of the external controller matches the laser and the control cable

is well connected to the laser’s interface. The recommended electrical connection is shown in

Fig. 4.

User

’s

cont

rolle

DB25

Controller

interface

Power

supply

wire

Laser

Module

24V+(Brown)

GND

External GND

24V

power

supply 24V-(Blue)

Figure 4. Schematic of recommended electrical connection

4) The bending radius of the delivery fiber should not exceed 15 cm.

24V+

GND

24V-

User’s guide Ytterbium Pulsed Fiber Laser RFL-P10Q/P20Q/ P30Q/ P20QE/P50QB Ver.: 2.0

5/ 9

3.Control Interface

There are DB9 and DB25 interfaces at the rear of the laser. The DB9 is a RS232 interface

only used for debugging, no needs to connect. And DB25 is the joint interface connecting control

system with laser system, please make sure the connection is reliable before operation. Feet of

the DB25 are defined as follows in Fig. 5.

Figure 5. Connect port of controller

Table 3 Definition of connect ports of controller

PIN No.

Name

Description

1-8

(D0-D7) Power Setting

8 bit Parallel port; D0 is minimum bit and D7

is maximum bit; Range: 0-255 (hexadecimal:

0X00-0XFF); 0 is minimum power and 255 is

maximum power.

10,13-15，

24-25 Ground Digital GND

11,12,16，

21 Laser alarms status see alarm codes in the table below

17 VCC

+5VDC power supply input for independent

operation of the guide laser and PCB

18 EE

Emission Enable (EE) signal.

HIGH: Emission Enable

LOW or disconnected: Emission Disable

19 EM

Emission Modulation (EM) input.

HIGH (>3V): Emission ON

LOW or disconnected (<1V): Emission OFF

20 Sync

Pulse Repetition Rate (Synchronization)

input, square wave.

Guide Laser signal

Guide Laser (red diode) ON/OFF input.

9,23

Obligate PIN

Reserved for Raycus only

User’s guide Ytterbium Pulsed Fiber Laser RFL-P10Q/P20Q/ P30Q/ P20QE/P50QB Ver.: 2.0

6/ 9

1) The pump current of diode laser and the laser output power are controlled by setting the

value of PIN1-PIN8 (TTL level). PIN1-PIN8 can be set from 0～255，corresponding to the

laser output power from 0～100％(the actual laser power may not be strictly linear with the

setting value). The relationship between PIN value and output power is shown in Table 4:

Table 4 Definition of power control PIN value

Setting 1

Setting 2

Setting 3

Setting 4

Setting 5

PIN 1

PIN 2 0 0 0 0 1

PIN 3

PIN 4

PIN 5

PIN 6

PIN 7 0 1 1 1 1

PIN 8

Current

~50 %

~75 %

~87.5 %

~93.75 %

100%

2) Alarms status: Pins 11, 12, 16 and 21 are the alarm and status outputs. Pin 12 is reserved

(always be high). These pins indicate the following device states.

Table 5 Definition of alarm status.

PIN 12

PIN 11

PIN 16

PIN 21

Alarm item

×Low Low Low Temperature alarm

Low

High

Normal

Low

High

Low

Obligate alarm

Low

High

System alarm

High

Low

Supply voltage

High

Low

High

Obligate alarm

High

Low

Obligate alarm

High

Obligate alarm

3) PIN 10、PIN 13 to PIN 15、PIN 24 are all digital GND.

4) PIN 20 is the pulse repeating rate signal (PRR, TTL level). If the PRR need to be changed

during the work, it must be changed 5ms earlier than the EM signal turning into high.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Raycus Messgerät Handbücher

Raycus

Raycus RFL-C6000S-CE Bedienungsanleitung

Raycus

Raycus RFL-C20000XZ Bedienungsanleitung

Raycus

Raycus ABP Series Bedienungsanleitung

Raycus

Raycus RFL-A2000D Bedienungsanleitung

Raycus

Raycus RFL-P20MX Montageanleitung

Raycus

Raycus RFL-C Series Bedienungsanleitung

Raycus

Raycus RFL-P70QA Montageanleitung

Raycus

Raycus RFL-C30000M-CE Bedienungsanleitung

Raycus

Raycus RFL-C1500 Bedienungsanleitung

Raycus

Raycus RFL-P20QS+ Montageanleitung

Raycus

Raycus RFL-C3000S-CE Bedienungsanleitung

Raycus

Raycus RFL-P200 Bedienungsanleitung

Raycus

Raycus RFL-B500D Bedienungsanleitung

Raycus

Raycus RFL-P100M Bedienungsanleitung

Raycus

Raycus RFL-A1000D Bedienungsanleitung

Raycus

Raycus RFL-QCW300 Bedienungsanleitung

Raycus

Raycus RFL-P20QB Bedienungsanleitung

Raycus

Raycus RFL-C20000M-CE Bedienungsanleitung

Raycus

Raycus RFL-P70Q Bedienungsanleitung

Raycus

Raycus RFL-A200D Bedienungsanleitung

Raycus

Raycus RFL-A1500D Bedienungsanleitung

Raycus

Raycus RFL-QCW450/1500FS Bedienungsanleitung

Raycus

Raycus RFL-C100 Bedienungsanleitung

Raycus

Raycus RFL-C1500H Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung