Reed Instruments R8005 Bedienungsanleitung

www.REEDInstruments.com

Laser

Distance

Meter

Instruction

Manual

R8005

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

www.REEDInstruments.com

Table of Contents

Introduction ................................................................................................ 3

Product Quality........................................................................................... 3

Safety ......................................................................................................... 4

Features...................................................................................................... 5

Applications................................................................................................ 5

Specications............................................................................................. 6

Instrument Description ............................................................................... 7

Display Description .................................................................................... 7

Operating Instructions.............................................................................8-9

Power ON/OFF...................................................................................... 8

Backlight................................................................................................ 8

Calibration Procedure............................................................................ 8

Reference Point Setting ........................................................................ 9

Setting the Unit of Measure................................................................... 9

Measurement Units ............................................................................... 9

Distance, Area, Volume, Pythagorean, Cumulative and

Regressive Measurement......................................................................9-14

Single Measurement.............................................................................. 9

Continuous Measurement ................................................................... 10

Area Measurement .............................................................................. 10

Volume Measurement.......................................................................... 10

Inderect Measurement ...................................................................11-12

Cumulative Mode (Single Measurement Mode) .................................. 13

Subtraction Mode (Single Measurement Mode).................................. 13

Cumulative Mode (Area Measurement Mode) ..................................... 13

continued...

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

www.REEDInstruments.com

Subtraction Mode (Area Measurement Mode) .................................... 14

Cumulative Mode (Volume Measurement Mode) ................................ 14

Subtraction Mode (Volume Measurement Mode)................................ 14

Saving Measurement Values .................................................................... 14

Browse/Delete Saved Measurement Values ............................................ 15

Battery Replacement................................................................................ 15

Troubleshooting Error Codes.................................................................... 15

Product Warranty ..................................................................................... 16

Product Disposal and Recycling .............................................................. 16

Product Support....................................................................................... 16

Introduction

Thank you for purchasing your REED R8005 Laser Distance Meter. Please

read the following instructions carefully before using your instrument. By

following the steps outlined in this manual your meter will provide years of

reliable service.

Product Quality

This product has been manufactured in an ISO9001 facility and has been

calibrated during the manufacturing process to meet stated product

specications. If a certicate of calibration is required please contact the

nearest authorized REED distributor or authorized Service Center. Please

note an additional fee for this service will apply.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

www.REEDInstruments.com

Safety

• Never attempt to repair or modify your

instrument. Dismantling your product,

other than for the purpose of replacing

batteries, may cause damage that will

not be covered under the manufacturer's

warranty. Servicing should only be

provided by an authorized service center.

• Use extreme caution when the laser beam is turned on.

• Do not let the beam enter your eye, another person's eye or the eye of

an animal.

• Be careful not to point the beam off a reective surface and strike

your eye.

• Do not allow the laser light beam to impinge on any gas which

can explode.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

www.REEDInstruments.com

Features

• Designed for one-handed operation

• User selectable unit of measure (imperial/metric)

• Laser target pointer

• Reference point selection (front or rear of instrument)

• Quick, self calculation with real-time readout

• Backlit multi-line LCD display

• Area, Volume and Max/Min functions

• Addition, Subtraction and indirect 2/3 point (Pythagoras) calculations

• Integrated bubble level (Horizontal and vertical)

• Continuous measurement mode

• Internal memory saves up to 99 readings

• Low battery indicator and auto shut off

• Includes carrying case and batteries

Applications

• Measuring conduit and wire lengths

• Light Retrotting Projects

• Piping/exhausts/ventilation and equipment installation

• Conduit layout and installation

• Air ventilation and duct work positioning

• Air volume calculations

• Hot/cold water piping locations

• Determining wire length and duct sizing

• Floor plans

• Network room layout

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

www.REEDInstruments.com

Specifications

Measuring Range: 164' (50m)

Accuracy: ±(2.0mm + d x 0.005%)

Measuring Units: m, ft, in, ft + in

Sensor Type: Laser

Laser Type: 630 to 670nm, <1mW

Display: LCD (multi-line)

Backlit Display: Yes

Start Point Selection: Yes (Front/Back)

Reading Mode: 2 (Single/Continuous)

Maximum and

Minimum Functions: Yes

Calculation Functions: Addition, Subtraction, Area, Volume,

Sum of Lengths, 2 point indirect

(pythagoras), 3 point indirect

Internal Memory: Yes (up to 99 readings)

Response Time: 2 seconds

Auto Shut-off: Yes (after 3 minutes)

Low Battery Indicator: Yes

Power Supply: 2 x AAA Batteries

Laser Class: Class II

Product Certications: CE, RoHS

Operating Temperature: 32 to 104°F (0 to 40°C)

Storage Temperature: -4 to 140°F (-20 to 60°C)

Operating Humidity Range: <85% RH

Dimensions: 4.8 x 2.05 x 1.16" (122 x 52 x 29.5mm)

Weight: 3.5oz (100g)

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

www.REEDInstruments.com

Instrument Description

1. Power/Measure Button

2. Plus (+) Button

3. Measurement Point/Unit

Selection Button

4. Minus (-)/Audible On/Off

Button

5. Function Button

6. Log Button

7. Power OFF/Clear Button

Display Description

1. Measurement Mode Indicator

2. Laser Emission Indicator

3. Main Measurement Display Area

4. Secondary Measurement

Display Area

5. Battery Status Indicator

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

www.REEDInstruments.com

Operating Instructions

Power ON/OFF

To turn the meter on, press and hold the button. To turn the meter

off, press and hold the button for approx. 3 seconds. The device will

power off automatically after idling for 180 seconds.

Backlight

The backlight will turn on after pressing any button, and turn off after 15

seconds of idling to save battery life.

Calibration Procedure

The R8005 includes a self-calibration mode to ensure measurement

accuracy.

1. While the meter is powered off, press and hold the button

while turning the meter on.

2. Release both buttons when "CAL" and a ashing number

appear on the display indicating that the meter is now in

self-calibration mode.

3. Use the button and the button to adjust error value. The

adjustment range is -9 to 9mm.

For example, if the meter appears to be measuring 2mm lower

than the actual distance, press the to increase the calibration

value by 2mm. If the meter appears to be measuring 3mm above

the actual distance, press the button to decrease the calibration

value by 3mm.

4. Press the button to save the set calibration result and resume

normal operation.

continued...

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

www.REEDInstruments.com

Reference Point Setting

The default reference point setting is from the bottom

of the meter. Press the button to toggle between

the bottom and top reference points of the meter. A

beep will emit whenever the reference setting

is changed.

Note: The meter does not automatically save the

selected reference point when turned off.

Setting the Unit of Measure

Hold the button to toggle between units of measure while in a

measurement mode. The default unit of measure is 0.000m. There are a

total of 4 selectable units.

Measurement Units

Length Area Volume

0.000m 0.000m² 0.000m³

0.00m 0.00m² 0.00m³

0.0in 0.00in² 0.00ft³

0 1/16 in 0.00ft² 0.00ft³

0'00" 1/16 0.00ft² 0.00ft³

0.00ft 0.00ft² 0.00ft³

Distance, Area, Volume, Pythagorean,

Cumulative and Regressive Measurement

Single Measurement

Press the button in measurement mode to emit laser and lock

the measurement point. Press the button again for single distance

data

measurement. Measurement result will be displayed on the main

display area.

continued...

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

www.REEDInstruments.com

Continuous Measurement

Hold the button on measurement mode to enter continuous

measurement mode. Secondary display area will display the maximum/

minimum measurement values during continuous measurement mode.

Main display area will display the current measurement value. Press the

button or the button to exit continuous measurement mode.

Area Measurement

Press the button and the display will show a rectangle. One side of

the rectangle will ash. Complete the following operations:

1. Press the button to measure the rst side (length)

2. Press the button to measure the second side (width)

The device will calculate the area automatically and the result will be

shown on the main display area.

Secondary display area shows the measurement values of the rectangle's

length and width.

During measurement, use the button to clear the measurement result

and restart measurement.

Press the button twice to exit area measurement mode.

Volume Measurement

Press the button twice to enter volume measurement mode and

a square will ash on the display. One side of the rectangle will ash.

Complete the following operations:

1. Press the button to measure the rst side (length)

2. Press the button to measure the second side (width)

3. Press the button to measure the third side (height)

The device will automatically calculate the volume and the result will be

shown in the main display area.

Secondary display area shows the measurement values of the square's

length, width, and height.

During measurement, use the button to clear the measurement result

and restart measurement.

continued...

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Reed Instruments Analytisches Instrument Handbücher

Reed Instruments

Reed Instruments R8500 Bedienungsanleitung

Beliebte Analytisches Instrument Handbücher anderer Marken

Cocraft

Cocraft NLT04 Bedienungsanleitung

M&C

M&C GENTWO PMA1000 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoncdt 1700 Bedienungsanleitung

CONDTROL

CONDTROL XP4 PRO Bedienungsanleitung

Extech Instruments

Extech Instruments BR200 Bedienungsanleitung

Dewetron

Dewetron DEWE-30-16 Produkthandbuch

EXTOL PREMIUM

EXTOL PREMIUM 8820043 Montage- und Bedienungsanleitung

RIDGID

RIDGID SeeSnake Compact Bedienungsanleitung

Teledyne

Teledyne 3000PA Bedienungsanleitung

YDLIDAR

YDLIDAR TIA Bedienungsanleitung

Olympus

Olympus IPLEX FX Series Bedienungsanleitung

Bosch

Bosch GLM 50 C Professional Bedienungsanleitung

Reflecta

Reflecta DigiEndoscope Bedienungsanleitung

Chinavision

Chinavision CVACZ-G696 Montageanleitung

Fuji Electric

Fuji Electric ZKMA Bedienungsanleitung

Teledyne

Teledyne 3300TA Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT IC-100HD Bedienungsanleitung

RIDGID

RIDGID micro CA-25 Bedienungsanleitung