Reed Instruments R8070SD Bedienungsanleitung
Data Logging
Sound Level
Meter
Instruction
Manual
R8070SD
REED Instruments
2
Table of Contents
Introduction ................................................................................................ 3
Product Quality........................................................................................... 3
Safety ......................................................................................................... 4
Features...................................................................................................... 4
Included...................................................................................................... 4
Specications..........................................................................................5-6
Comparison of Frequency Weightings and Tolerance Limits ............... 6
Time Weighting (Fast & Slow) Characteristics...................................... 6
Instrument Description ............................................................................... 7
Display Description .................................................................................... 8
Operating Instructions...........................................................................9-11
Power ON/OFF..................................................................................... 9
Basic Operation...............................................................................9-10
Data Hold ........................................................................................... 10
Peak Hold ........................................................................................... 10
Recording Maximum and Minimum Readings ................................... 10
Backlight............................................................................................. 11
Setup Mode.........................................................................................11-13
Setting the Time and Date (dAtE) ....................................................... 11
Setting Data Decimal Format (dEC).................................................... 12
Enabling/Disabling Auto Power OFF (PoFF)....................................... 12
Enabling/Disabling the Beeper Sound (bEEP).................................... 12
Setting the Data Logging Sampling Rate (SP-t) ................................. 12
Formatting the SD Card (Sd F) ........................................................... 13
Checking Time and Date .................................................................... 13
Checking Sampling Rate .................................................................... 13
continued...
REED Instruments
3
Data Logging.......................................................................................13-17
Data Recording Modes....................................................................... 13
Manual Data Logging Mode ............................................................... 14
Automatic Data Logging Mode .....................................................14-15
Transferring Data from the SD Memory Card to a Computer............. 15
Calibration Procedure ........................................................................ 16
Data Stream Output ........................................................................... 16
3.5mm Terminal to RS-232 Serial Connection ................................... 17
Battery Replacement................................................................................ 17
Applications.............................................................................................. 17
Accessories and Replacement Parts ....................................................... 18
Frequently Asked Questions (FAQ's)........................................................ 18
Product Care ............................................................................................ 19
Product Warranty ..................................................................................... 19
Product Disposal and Recycling .............................................................. 20
Product Support....................................................................................... 20
Introduction
Thank you for purchasing your REED R8070SD Data Logging Sound Level
Meter. Please read the following instructions carefully before using your
instrument. By following the steps outlined in this manual your meter will
provide years of reliable service.
Product Quality
This product has been manufactured in an ISO 9001 facility and has been
calibrated during the manufacturing process to meet the stated product
specications. If a certicate of calibration is required please contact the
nearest authorized REED distributor or authorized Service Center. Please
note an additional fee for this service will apply.
REED Instruments
4
Safety
Never attempt to repair or modify your instrument. Dismantling your
product, other than for the purpose of replacing batteries, may cause
damage that will not be covered under the manufacturer's warranty.
Servicing should only be provided by an authorized service center.
Features
signals to frequency analysers, level recorders, FFT analysers, graphic
recorders, etc.
Included
REED Instruments
5
Specifications
Measuring Ranges: 30 to 130dB
Low: 30 to 80dB
Med: 50 to 100dB
Full: 30 to 130dB
Dynamic Range: 50dB (in each range)
Resolution: 0.1dB
Response Time: 500ms
Frequency Weighting: A, C
Microphone: 0.5" (12.7mm) electret condenser
Display: 4-digit LCD
Backlit Display: Yes
Min: Yes
Datalogging Capabilities: Yes
Real-Time Clock and
Date Stamp: Yes
Selectable Sampling Rate: Yes (1, 2, 5, 10, 30, 60, 120, 300,
600, 1800, 3600 seconds)
with SD card (optional)
Kick Stand: Yes
Tripod Mountable: Yes
Low Battery Indicator: Yes
continued...
REED Instruments
6
Data Output: Yes (RS-232)
AC Output Signal: 0.5Vrms (full scale of selected range)
AC Output Impedance: 600 ohms
AC Output Terminal: 3.5mm Stereo Jack
Battery Life: Sampling Time Dependent
Product Certications: CE, IEC 61672-1-2013, Class 2
Operating Temperature: 32 to 122°F (0 to 50°C)
Storage Temperature: 14 to 140°F (-10 to 60°C)
Weight: 0.7lbs (320g)
Comparison of Frequency Weightings and Tolerance Limits
Frequency Hz
A Weighting
Characteristics
C Weighting
Characteristics
Tolerance
(IEC 61672 class 2)
31.5 -39.4dB -3dB
63 -26.2dB -0.8dB
125 -16.1dB -0.2dB
250 -8.6dB 0dB
500 -3.2dB 0dB
1K 0dB 0dB
2K +1.2dB -0.2dB
4K +1dB -0.8dB
8K -1.1dB -3dB
Time Weighting (Fast & Slow) Characteristics
Time Weighting
Characteristics
Max Response Reference
Continuous Signal
Tolerance
(IEC 61672 class 2)
F (Fast) -1.0dB
S (Slow) -4.1dB
REED Instruments
7
Instrument Description
SET
3
4
5
6
7
8
9
10
12
14
15
16
17
Sound Level Meter
SD Series Data Logger
R8070SD
13
11
POWER
ESC
LOGGER
FAST/SLOW
A / C
TIME CHECK
RANGE
PEAK/HOLD
SAMPLING CHECK
HOLD
NEXT
REC
ENTER
1. Microphone
2. LCD Display
5. Button
6. SD Card Slot
7. Button
ENTER Button
Button
11. Tripod Mounting Screw
12. Battery Cover
13. Kickstand
14. AC Output Jack
15. Calibration Potentiometer
16. RS-232 Output Jack
17. Power Adapter Input
REED Instruments
8
Display Description
PEAK
A
C
dB
FAST SLOW
HOLDREC MAX
AUTO
yy.mm.dd
h.m.s
30-80
MIN
50-10080-130
A
dB
FAST
AUTO
LOGGER
3456
7
8
9
10
11
12
13
1. Low Battery Indicator
2. Peak Indicator
4. Record Mode Indicator
Indicator
6. Data logging Status Indicator
7. Frequency Weighting Indicator
8. Reading Indicator
11. Time Weighting Indicator
12. dB Range indicators
REED Instruments
9
Operating Instructions
Power ON/OFF
1. Turn the meter on by pressing the POWER button. To turn the meter
off, press and hold the POWER button for 2 seconds.
Note:
or an optional AC adapter (sold separately).
Basic Operation
1. At start up, the meter's default settings are "Auto Range", "A
Frequency Weighting" and "Fast Time Weighting".
PEAK
A
C
dB
FAST SLOW
HOLDRECMAX
AUTO
yy.mm.dd
h.m.s
30-80
MIN
50-10080-130
A
dB
FAST
AUTO
LOGGER
3456
7
8
9
10
11
12
13
2. Press the Fast/Slow button to select the desired Response Time. If
the sound source consists of short bursts, set the response to FAST
(125ms). To measure average sound level, select SLOW (1 second).
3. Press the A/C button to select the Frequency weighting. Select
"A" Weighting for a general noise sound level, or "C" Weighting for
measuring high level noise. "C" Weighting is a standard weighting of the
audible frequencies commonly used for the measurement of Peak Sound
Pressure Level. If the "C" Weighted level is much higher than the "A"
Weighted level, then there will be a large amount of low-frequency noise.
4. Press the RANGE button to scroll through the four dB range types.
There are three manual dB ranges to select from and auto range. The
manual ranges are described as follows:
Range 1: 30 to 80dB range
Range 2: 50 to 100dB range
Range 3: 80 to 130dB range
continued...
REED Instruments
10
or position it on a tripod for long-term monitoring. Point the
microphone in the direction of the noise to take a measurement.
Note: Direct contact with strong winds or blowing air on the microphone
may cause measurement errors. These effects can be reduced by using
the included windshield ball.
Data Hold
1. While taking a measurement, press the HOLD button to freeze the
current readings on the display.
3. Press the HOLD button again to resume normal operation.
Note:POWER
button are disabled.
Peak Hold
1. While taking a measurement, press the LOGGER button to capture
and freeze a noise peak.
2. While in this mode a PEAK symbol will appear and the displayed
reading will only change when a higher sound peak is registered.
3. Press the LOGGER button again to resume normal operation.
Recording Maximum and Minimum Readings
1. Press the REC button to enter recording mode as indicated by
and minimum readings.
2. While in recording mode:
A) Press the REC
B) Press the REC button again and the minimum value will appear
on the display as indicated by "REC MIN".
hold the REC button for two seconds.
Note: When in recording mode the POWER button is disabled and the
meter cannot be turned off.
continued...
REED Instruments
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Reed Instruments Messgerät Handbücher
Reed Instruments
Reed Instruments R5065 Bedienungsanleitung
Reed Instruments
Reed Instruments R7050 Bedienungsanleitung
Reed Instruments
Reed Instruments R7150 Bedienungsanleitung
Reed Instruments
Reed Instruments R6000 Bedienungsanleitung
Reed Instruments
Reed Instruments SMART Series Bedienungsanleitung
Reed Instruments
Reed Instruments R6200 Bedienungsanleitung
Reed Instruments
Reed Instruments SD-4023 Bedienungsanleitung
Reed Instruments
Reed Instruments R3500 Bedienungsanleitung
Reed Instruments
Reed Instruments SMART Series Bedienungsanleitung
Reed Instruments
Reed Instruments R7000SD Bedienungsanleitung
Reed Instruments
Reed Instruments R3000SD Bedienungsanleitung
Reed Instruments
Reed Instruments R8050 Bedienungsanleitung
Reed Instruments
Reed Instruments R8085 Bedienungsanleitung
Reed Instruments
Reed Instruments R8050 Bedienungsanleitung
Reed Instruments
Reed Instruments R6210 Bedienungsanleitung
Reed Instruments
Reed Instruments R8140 Bedienungsanleitung
Reed Instruments
Reed Instruments LM-8000 Bedienungsanleitung
Reed Instruments
Reed Instruments R5001 Bedienungsanleitung
Reed Instruments
Reed Instruments Smart Series Bedienungsanleitung
Reed Instruments
Reed Instruments Smart R1610 Bedienungsanleitung
