REED SD-9901 Bedienungsanleitung

Model

Instruction

Manual

Air Quality Datalogger

SD-9901

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Table of Contents

Features............................................................................................ 3

Specications................................................................................3-5

Instrument Description ..................................................................... 6

Operating Instructions.................................................................7-11

Function selection.......................................................................... 7

Data Hold ...................................................................................... 7

Data Record ...............................................................................7-8

Backlight ON/OFF.......................................................................... 8

Datalogger..................................................................................... 8

Auto Datalogger............................................................................. 9

Manual Datalogger......................................................................... 9

Checking the Time....................................................................... 10

Check Sampling Time Information................................................10

SD Card Data Structure............................................................... 10

Data Transfer from SD card to Computer................................10-11

Advanced Settings ....................................................................11-14

SD memory card Format ............................................................. 12

Set Clock Time ............................................................................ 12

Set sampling time ........................................................................ 12

Auto power OFF management..................................................... 13

Set Beeper Sound ON/OFF ......................................................... 13

Setting the Decimal point on the SD Card.................................... 13

Select the Temperature unit to °C or °F........................................ 13

Set Alarm value............................................................................ 14

ESC............................................................................................. 14

Setting the CO2Height Compensation Value in Meters ................ 14

Setting the CO2Height Compensation Value in Feet ....................14

PC Serial Interface.......................................................................... 15

System Reset ................................................................................. 16

Battery Replacement...................................................................... 16

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Features

• No extra software needed, just plug the SD card into the computer

and it downloads directly to EXCEL

• Simultaneously records data from three probes

• Meter can switch to a Manual Datalogging

• Measures CO2, CO, O2, Humidity, and Temperature

• Non-dispersive infrared CO2sensor

• Galvanic cell CO and O2sensors

• Precision capacitance Humidity sensor

• Real time SD memory card datalogger with a built-in clock and

calendar

• Sampling time set from 2 seconds to 8 hours

• Easy to read LCD with backlight

• Auto power off or manual power off

• Data hold, record max. and min. reading

• Alarm setting with beeper

• High accuracy microcomputer circuit

• Power by UM3/AA (1.5 V) x 6 batteries

• USB/RS232 Computer interface

• Separated probe for easy measurements of multiple environments

Specifications

Circuit: Custom microprocessor LSI circuit

Display: 52mm x 38mm LCD with backlight

Auto Sampling Time: 2 seconds to 8 hours

Memory Card: SD memory card, 1 GB to 16 GB

Data Output: USB/RS232 PC computer interface

Sampling Time: Approx. 1 second

Operating Temperature: 0-50°C (0-122°F)

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Operating Humidity: Less than 85% R.H.

Power Supply: UM3/AA (1.5 V) x 6 batteries

Weight: 350g/0.77lb

Dimensions: Meter: 177 x 68 x 45mm;

Humidity probe: 197mm long;

CO probe: 150 x 38 x 38mm;

CO2probe: 190 x 38 x 28mm;

O2probe: 150 x 38 x 38mm

Includes: Humidity probe, CO probe, CO2probe,

O2probe, and hard carrying case

Optional accessories: 4G SD Card (SD-4GB)

USB cable (USB-01)

Power adapter (AP-9VA-110V)

Data Acquisition Software (SW-U801-WIN)

Tripod (BS-6)

Visit us at www.reedinstruments.com for more information on our Optional

Accessories, or e-mail us at info@reedinstruments.com

CO2(Carbon Dioxide)

Range: 0 - 4,000 ppm

Resolution: 1 ppm

Accuracy: ±40 ppm (<1,000 ppm), ±5% (>1,000 ppm)

Repeatability: ±20 ppm

CO (Carbon Monoxide)

Range: 0 - 1,000 ppm

Resolution: 1 ppm

Accuracy: ±(5% + 2 ppm)

Response time: <30 seconds

Repeatability: <2%

Zero drift in long term: <5 ppm

Sensitivity drift: <5% per year

continued...

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

O2(Oxygen)

Range: 0 – 30% O2

Resolution: 0.1% O2

Accuracy: ±(1% + 0.2% O2)

Response time: <15 seconds

Overload protection: 100% O2

Environment pressure range:

0.9 - 1.1 atmospheres

Expected life: >2 years

Alarm: <18.0% O2

Temperature

Range: 0 – 50°C (32 – 122°F)

Resolution: 0.1

Accuracy: ±0.8°C (±1.5°F)

Humidity

Range: 5% - 95% RH

Resolution: 0.1% RH

Accuracy: >70%RH: ±(3% reading + 1%RH);

<70%RH: ±3%RH

Dew Point Temperature

Range: -25.3 – 48.9°C (-13.5 – 120.1°F)

Resolution: 0.1

Wet Bulb Temperature

Range: -21.6 – 50°C (-6.9 – 122.1°F)

Resolution: 0.1

For service on this or any other REED product or information on other

REED products, contact REED Instruments at [email protected]

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Instrument Description

1. Display

2. Power & Backlight Button

3. Hold ESC Button

4. REC & Enter Button

5. Alarm & Up Button

6. Function & Down Button

7. Time Button

8. Logger, SET, & Sampling Check

Button

9. Stand

10. Battery Compartment/Cover

11. Battery Cover Screw

12. Tripod Fix Nut

13. Humidity Probe Socket

14. CO2Probe Socket

15. O2/CO Probe Socket

16. AC/DC 9V Power Adapter Input

Socket

17. Reset Button

18. USB/RS232 Output

19. SD Card Slot

20. Humidity Sensor

21. Humidity Probe Plug

22. CO2Sensor

23. CO2Probe Plug

24. O2Sensor

25. O2Probe Plug

26. CO Sensor

27. CO Probe Plug

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Operating Instructions

Function selection

This meter can have three probes plugged in at the same time: the Hu-

midity, CO2, and either the O2or the CO Probe. The meter will datalog all

three values, but will only display one at a time on the LCD screen.

1) Plug in the Humidity, CO2, and either the O2or the CO Probe into

the meter.

2) Turn on the meter by pressing the Power Button. To turn the meter

off, hold the Power Button for over 2 seconds.

3) Press the Function Button to scroll through the measuring

functions:

Display Function

rH Humidity/Temperature

dP Dew point Temperature

_ET Wet bulb Temperature

CO CO/Temperature

O2 O2/Temperature

CO2 CO2/Temperature

The selected measurement function will be saved as the default.

Data Hold

While taking a measurement, press the Hold Button once and the mea-

sured value will hold on the screen, and a HOLD symbol will appear. Press

the Hold Button once again will release the data hold function.

Data Record (Max., Min. reading)

The data record function records the maximum and minimum readings.

Press the REC Button once to start the Data Record function and a “REC”

symbol will appear on the display. With the “REC” symbol on the display:

1) Press the REC Button once, and a ”REC. MAX.” symbol along with

the maximum value will appear on the display. continued...

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

To delete the maximum value, press the Hold Button once and the

display will show a “REC.” symbol only and execute the memory

function continuously.

2) Press the REC Button again, and a “REC. MIN.” symbol along

with the minimum value will appear on the display. To delete the

minimum value, press the Hold Button once, and the display will

show a “REC.” symbol only and execute the memory function

continuously.

3) To exit the memory record function, press the REC button for 2

seconds. The display will revert to the current reading.

Backlight ON/OFF

After powering the meter ON, the LCD Backlight will turn on automati-

cally. While taking measurements, press the Backlight Button and the LCD

Backlight will turn off. Press the Backlight Button once again to turn the

LCD Backlight back ON.

Datalogger

Preparation Before Executing the Datalogger Function:

1) Insert the optional SD card into the SD card socket.

2) Before you use an SD card with this meter for the rst time, it is

recommend to format the SD card. See Advanced Settings section

of this manual for instructions.

3) If this is the rst time the meter is used you need to adjust the

clock. See Advanced Settings section of this manual for instruc-

tions.

4) Now you need to set the decimal format. The numerical data struc-

ture downloaded to the SD card is defaulted used the “.” as the

decimal, for example “20.6” “1000.53”. But in certain countries the

“,” is used as the decimal point, for example “20,6” “1000,53”. See

Advanced Settings section of this manual for instructions on how

to change the Decimal Character.

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Auto Datalogger (Set sampling time ≥1 second)

1) Start Datalogging; press the REC Button, and the “REC” symbol

will appear on the LCD screen, then press the Logger Button, the

“REC” symbol will ash while the measuring data and time informa-

tion is being saved in memory. To set the sampling time, and to

toggle the beeper sound on or off, refer to the Advanced Settings

section of this manual.

2) Pause the Datalogging; while Datalogging, if press the Logger But-

ton once. While paused, the “REC” symbol will stop ashing. Press

the Logger Button again to resume Datalogging, and the “REC”

symbol will begin to ash again.

3) Stop Datalogging; while the Datalogger function is paused, press

the REC Button for 2 seconds. The “REC” symbol will disappear

indicating the Datalogging function has stopped.

Manual Datalogger (Set sampling time = 0 seconds)

1) Set sampling time is to 0 second; Press the REC Button, and the

“REC” symbol will appear on the LCD screen. Press the Logger

Button, and the “REC” symbol will ash once and one Beep will

sound, at the same time the measuring data along the time infor-

mation will be saved in memory. The lower Display will show the

Position (record) number, which is saved as well.

2) To Change the Position Number; press the Down Button and the

lower position number will ash on the display. Press the Up or

Down Buttons to set the Position Number (1 to 99) to help identify

the measurement location. The lower Display will show P x (x = 1 to

99). After the position number is selected, press the Enter Button to

conrm.

3) Stop Datalogging; press the REC Button for 2 seconds, and the

“REC” symbol will disappear indicating the Datalogging function

has stopped.

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Checking the Time

During normal functions (not Datalogging), press the Time Check Button

and the lower LCD display will show the Year, Month/Date, Hour/Minute.

Check Sampling Time Information

During normal functions (not Datalogging), press the Sampling Button and

the lower LCD display will show the Sampling Time Information.

SD Card Data Structure

1) The rst time the SD card is used in the meter, the SD card will

generate a folder: AQA01

2) The rst time you use the Datalogger, in the folder AQA01, a new

le name AQA01001.XLS will be created. The Datalogger will use

this le until the Data has reached to 30,000 rows. The meter will

then will generate a new le with a subsequent number, for ex-

ample AQA01002.XLS.

3) The folder AQA01 can hold 99.XLS les. When that number has

been reached, the meter will then will generate a new folder with

a subsequent number, for example AQA02. Max number of AQA--

folders is 10.

Data Transfer from SD card to Computer (EXCEL Software)

1) After Datalogging, remove the SD card from the SD card slot.

2) Plug in the SD card into the Computer’s SD card slot or insert the

SD card into the optional SD card adapter and connect to your

Computer. Turn your computer on and a folder will appear on your

desktop representing you SD card.

3) Open “Microsoft EXCEL”. Download the EXCEL les from the SD

Card to the computer by opening up the SD folder and selecting

the desired EXCEL les, and drag-and-drop them onto your Com-

puter. Open the les with EXCEL (File – Open).

continued...

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Andere Handbücher für SD-9901

Inhaltsverzeichnis

Andere REED Andere Handbücher

REED

REED GD-3300 Bedienungsanleitung

Beliebte Andere Handbücher anderer Marken

GO Industries

GO Industries 38017 Bedienungsanleitung

Cissell

Cissell 30LBCMAN2 Bedienungsanleitung

RIDGID

RIDGID K-60SP Bedienungsanleitung

Gage Bilt

Gage Bilt GB751SH-5 Bedienungsanleitung

OVE

OVE SIERRA 60 Bedienungsanleitung

ReelCraft

ReelCraft 7800 OLB21 Bedienungsanleitung

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Bedienungsanleitung

ROBLIN

ROBLIN DROP Benutzerhandbuch

EMG

EMG EMG-ACB BARREL Service-Handbuch

MiniSolar

MiniSolar MT-150 Bedienungsanleitung

Parkside

Parkside PSZ 250 B2 Bedienungsanleitung

ABB

ABB REM 610 Produkthandbuch

Parkside

Parkside 55992 Betriebsanleitung

Skyjacker

Skyjacker F250 Bedienungsanleitung

IBM

IBM IBM SYSTEM Z Installationsanleitung

Grech Motors

Grech Motors G28 Bedienungsanleitung

NOVAK

NOVAK BATTERY CARE SHEET Leitfaden

Telemotive

Telemotive blue PiraT Mini Benutzerhandbuch