ReelCraft 5635 ELPSW5 Bedienungsanleitung

1. Do not use reel at higher pressures or temperatures than listed on

the back of this bulletin.

2. Remove all spring tension before beginning dissassembly process.

SAFETY

INSTALLATION: A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible

misalignment and binding.

LUBRICATION: Hose reel spring and bearings are factory lubricated and require no further lubrication.

REPLACING HOSE: 1. Remove 1/4-20 hex nuts (4) which fasten the hose guide enclosure to the reel back cover and pull off the

enclosure.

2. Wind spool flange clockwise-facing swivel-until spring is tight.

3. Back off three turns and latch.

4. Insert hose through roller guide.

5. Connect hose fitting to swivel joint and secure hose with clamps.

ADJUSTMENTS: To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is

obtained.

REPAIRS: Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may

void your warranty. Remove all spring tension before beginning disassembly process.

Operating Instructions

Series 5000 Spring Driven Hose Reels

Enclosed Pre-Rinse Model Numbers:

Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725

Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605

Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com

Form# 1261-314 Rev: 5/2018

MOUNTING: The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or

ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing

the 1/4-20 hex nuts (4) fastening the hose guide enclosure to the reel back cover. Shift the hose guide

enclosure to the desired position and replace the 1/4-20 hex nuts. NOTE: For proper installation in wall mount

applications, ensure reel is mounted with inlet on the right as you are facing the reel. Failing to do so could cause

latching issues.

Dimensions

A 15”

B16 1/4”

C9 3/4”

D2 1/2”

E 7”

5635 ELPSW5

Series 5000 Spring Driven Hose Reels

Page 2 www.reelcraft.com

Item # Part # # Req. Description Item # Part # # Req. Description

1 500102 1 Case and Cover Assembly 19 S82-15 1 10-32 x 3/8” Nyloc Nut

2 300001 4 10-32 x 3/8” Screw 20 S400021 1 Latch Bumper

3 S600886 1 Swivel Assembly 21 S32-136 1 10-24 x 3/8” Screw

4 300031 1 1” Snap Ring 22 S400018 1 Latch Spring

5 300034 4 Spacing Washer 23 300002 7 10-32 x 1/2” Screw

6 S295-102 3 1/4-10 x 5/8” Hex Screw 24 S400012 1 Latch Bushing

7 260022 1 Sheave Flange 25 400020 7 O-ring

8 500006 1 Sheave Disk 26 S400109 1 Latch Plate Assembly

9 S500019 1 Latch Cam 27 300035 1 10-32 x 1” Mach. Screw

10 S260648 1 Spring Arbor 28 3-117440 1 Hose Clamp

11 500004 1 Reel Cover 30 S400015 1 Main Shaft

12 300070 4 1/4-20 Nyloc Nut 31 601052-35 1 Hose Assembly

13 500101 1 Base Assembly 32 1-HR1004 1 Bumper Stop

14 504240 1 Drive Spring Assembly 33 S260019 1 Guide Roller Pin Kit

15 S261360 1 Spring Case Stud 34 HR2012 1 Hose Guide Assembly

16 S500103 1 Spring Case Assembly 35 261650-1 2 1/4-20 Nyloc Nut

17 300006 1 3/8-16 x 1/2” Set Screw 36 S600080 1 Spray Valve

18 S300011 7 10-32 Hex Lock Nut 37 600248 * 360° Swivel (Optional)

16 17

Hose I.D. and Length 3/8” x 35’

Reel Inlet Connection 3/8” NPT(F)

Max. Operating Pressure 250 PSI

Max. Operating Temperature 210 °F

Inhaltsverzeichnis

Andere ReelCraft Andere Handbücher

ReelCraft

ReelCraft CM6100HN Bedienungsanleitung

ReelCraft

ReelCraft E9000 Series Bedienungsanleitung

ReelCraft

ReelCraft A5850 OLPSMR Bedienungsanleitung

ReelCraft

ReelCraft T-1116-08 Bedienungsanleitung

ReelCraft

ReelCraft TW7000 Series Bedienungsanleitung

ReelCraft

ReelCraft TW84000 OLPT Bedienungsanleitung

ReelCraft

ReelCraft E9000 Series Bedienungsanleitung

ReelCraft

ReelCraft WC7000 Bedienungsanleitung

ReelCraft

ReelCraft TH86050 OMP Bedienungsanleitung

ReelCraft

ReelCraft TW Series Bedienungsanleitung

ReelCraft

ReelCraft D9200 OLS Bedienungsanleitung

ReelCraft

ReelCraft GC7535 OLP Bedienungsanleitung

ReelCraft

ReelCraft 5000 Series Bedienungsanleitung

ReelCraft

ReelCraft 5625 OMP Bedienungsanleitung

ReelCraft

ReelCraft 5600 OLB Bedienungsanleitung

ReelCraft

ReelCraft TW5400 OLP Bedienungsanleitung

ReelCraft

ReelCraft D9300 OMS Bedienungsanleitung

ReelCraft

ReelCraft 5005 Series Bedienungsanleitung

ReelCraft

ReelCraft 5400 OHP Bedienungsanleitung

ReelCraft

ReelCraft 4000 Series Bedienungsanleitung

ReelCraft

ReelCraft 5600 ELS Bedienungsanleitung

ReelCraft

ReelCraft Series WC80000 Bedienungsanleitung

ReelCraft

ReelCraft A5835 OLBSW23 Bedienungsanleitung

ReelCraft

ReelCraft 5635 OLSSW5 Bedienungsanleitung

Beliebte Andere Handbücher anderer Marken

GO Industries

GO Industries 38017 Bedienungsanleitung

Cissell

Cissell 30LBCMAN2 Bedienungsanleitung

RIDGID

RIDGID K-60SP Bedienungsanleitung

Gage Bilt

Gage Bilt GB751SH-5 Bedienungsanleitung

OVE

OVE SIERRA 60 Bedienungsanleitung

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Bedienungsanleitung

ROBLIN

ROBLIN DROP Benutzerhandbuch

EMG

EMG EMG-ACB BARREL Service-Handbuch

MiniSolar

MiniSolar MT-150 Bedienungsanleitung

Parkside

Parkside PSZ 250 B2 Bedienungsanleitung

ABB

ABB REM 610 Produkthandbuch

Parkside

Parkside 55992 Betriebsanleitung

Skyjacker

Skyjacker F250 Bedienungsanleitung

IBM

IBM IBM SYSTEM Z Installationsanleitung

Grech Motors

Grech Motors G28 Bedienungsanleitung

NOVAK

NOVAK BATTERY CARE SHEET Leitfaden

Telemotive

Telemotive blue PiraT Mini Benutzerhandbuch

Zanussi

Zanussi ZDC8203W Bedienungsanleitung