Regency Ultimate U38-LP1 Bedienungsanleitung

U38 Top Vent Freestanding B-Vent Gas Stove

Model U38-NG1 U38-LP1

Fuel Type Natural Gas Propane

Minimum Supply Pressure 5” W.C. (1.25 kPa) 12” W.C. (3.00 kPa)

Manifold Pressure - High 3.8” W.C. (0.94 kPa) 11” W.C. (2.74 kPa)

Manifold Pressure - Low 1.1” W.C. (0.27 kPa) 2.9” W.C. (0.72 kPa)

Oriﬁce Size Altitude 0-2000ft (0-610m) #31

#50

Oriﬁce Size Altitude 2000-4500ft (610-1370m) #33

Oriﬁce Size 30,000 Max BTU #37 #52

Minimum Input Altitude 0-2000ft (0-610m) 21,000 BTU/h

20,000 BTU/h

Minimum Input Altitude 2000-4500ft (610-1370m) 19,000 BTU/h

Minimum Input Converted to 30,000 Max BTU 15,000 BTU/h 15,000 BTU/h

Maximum Input Altitude 0-2000ft (0-610m) 40,000 BTU/h

38,000 BTU/h

Maximum Input Altitude 2000-4500ft (610-1370m) 36,000 BTU/h

Maximum Input Converted to 30,000 Max BTU 30,000 BTU/h 30,000 BTU/h

Vent Sizing 4” B-Vent 4” B-Vent

Dimension Description U38

A Top Width 26” (660mm)

B Unit Height 30” (762mm)

C Top Depth (back to front face) 17-5/8” (448mm)

D Top Depth 17” (432mm)

E Height; Base to Gas Line 3-1/2” (89mm)

F Top; Front to Back 17” (432mm)

G Depth; Flue-Centerline to Back 3-1/2” (89mm)

H Width; Side of unit to Gas Line 10-3/4” (273mm)

U38 Gas Stove

Alcove clearances

Dimension Description U38

I Side Wall to Unit 7-1/2” (190mm)

J Back Wall to Unit 6” (155mm)

K Back Wall to Vent Centerline 10-3/4” (273mm)

L Side Wall to Vent Centerline 20-1/2” (521mm)

Corner Clearances

Dimension Description U38

M Wall to Unit Corner 2” (50mm)

N Wall to Vent Centerline 11” (280mm)

Minimum ceiling height is 36" (914mm) from top of unit.

Minimum clearance to vent : According to B-Vent Manufacturer

The above listed clearances are minimum distances to combustible

materials. When installing on carpet or vinyl ﬂooring the bottom pedestal

cover plate must be installed.

Approved Venting Systems

Vent Systems: Listed B-Vent, Class-A or Masonry

Chimney with approved liner (FPI

AstroCap™ Flex Vent)

155June 2007 Regency Product Speciﬁcations Book

Gas Stoves

Venting

This heater is a vented appliance and must be connected to a chimney/

ﬂue in accordance with the installation codes.

Note: The rear pedestal cover plate is only required when outside

air is being used. If using room air for combustion, remove

this plate from the back of the pedestal.

For your safety this heater is equipped with a vent safety switch designed

to sense incorrect venting and react by shutting down the gas supply.

This thermally actuated switch is located within the draft hood and

will detect either a blocked chimney or backdraft condition where the

chimney ﬂow has reversed. If this switch shuts the unit down, it indicates

a drafting problem that must be identiﬁed and rectiﬁed without delay - the

thermally activated switch must never be bypassed or disconnected as

a hazardous or deadly condition can result.

Venting Requirements

A four inch diameter vent is required. B-Vent, Class A or Masonry

with an approved liner are all acceptable. For cosmetic or aesthetic

purposes 6" outer vent can be used as long as an approved inner vent

is installed. Fasten but do not penetrate the inner sleeve of the B-Vent

when tightening the screw.

Follow all venting manufacturer’s requirements and local building codes.

In cold climates, we recommend the use of insulated B-Vent, chase, and

liners. For altitudes above 2000 ft. we recommend that a minimum ﬂue

height of 12 ft. is used.

Flue Mounting Bracket

Attach the ﬂue mounting bracket with the enclosed screw as shown in

the diagram.

Installation into Existing

Wood Stove Flue System

1) Clean existing Chimney system.

2) Run an approved 4" ﬂex liner or "B" vent into existing chimney.

Note:

See the chimney systems manufacturer for detailed

installation instructions.

U38 Gas Stove

156 June 2007 Regency Product Speciﬁcations Book

Gas Stoves

Dieses Handbuch passt für folgende Modelle

Andere Regency Herd Handbücher

Regency

Regency ULTIMATE U41FS-NG Bedienungsanleitung

Regency

Regency Ultimate U39-NG1 Kurzanleitung

Regency

Regency Classic C34 Kurzanleitung

Regency

Regency FG39-NG1 Kurzanleitung

Regency

Regency FG39-NG1 Kurzanleitung

Regency

Regency ULTIMATE U37-NG1 Kurzanleitung

Regency

Regency C34-LP2 Kurzanleitung

Regency

Regency Ultimate U39EX Kurzanleitung

Regency

Regency F1500 Bedienungsanleitung

Regency

Regency C33-LP2 Kurzanleitung

Regency

Regency FIREGENIE FG37-LPG Kurzanleitung

Regency

Regency F33-NG1 Kurzanleitung

Regency

Regency Vancouver F2402M Kurzanleitung

Regency

Regency GR57H and Betriebsanleitung

Regency

Regency FIREGENIE FG37-NG Bedienungsanleitung

Regency

Regency F39-NG Kurzanleitung

Regency

Regency greenfire GFI55 Bedienungsanleitung

Regency

Regency F2500 Bedienungsanleitung

Regency

Regency Energy E21 Kurzanleitung

Regency

Regency Ultimate U39 Kurzanleitung

Regency

Regency ULTIMATE U38-LP Kurzanleitung

Regency

Regency ULTIMATE U39-LP Kurzanleitung

Regency

Regency C33-LP3 Kurzanleitung

Regency

Regency ULTIMATE U41FS-LP Bedienungsanleitung

Beliebte Herd Handbücher anderer Marken

Arada

Arada Cassette Stove Bedienungsanleitung

Parmco

Parmco FS 600 Bedienungsanleitung

MCZ

MCZ SUITE AIR 10 M2 Bedienungsanleitung

HearthStone

HearthStone Stowe DV 8321 Fehlerbehebungshandbuch

Cattara

Cattara FAMILY Bedienungsanleitung

Stanley

Stanley Argon F500 OVAL Bedienungsanleitung

Avalon

Avalon B-VENT Bedienungsanleitung

Nordpeis

Nordpeis Vega Bedienungsanleitung

Exquisit

Exquisit EKC601-5 Bedienungsanleitung

Stanley

Stanley Oisin Oil MK II Betriebsanleitung

Thermocet

Thermocet Brookfield S/CC Bedienungsanleitung

HASE

HASE delhi Bedienungsanleitung

Vermont Castings

Vermont Castings Intrepid 2 Bedienungsanleitung

Italiana Camini

Italiana Camini CLASSICA Kurzanleitung

Avalon

Avalon Vashon Avanti DVS FS Bedienungsanleitung

Spartherm

Spartherm ambiente a1 Bedienungsanleitung

Dimplex

Dimplex MCFSTV12AU Bedienungsanleitung

Warmlite

Warmlite WL46040 Bedienungsanleitung