ResMed S9 H5i Bedienungs- und Sicherheitshinweise

Global leaders in sleep and respiratory medicine www.resmed.com

3681130/1 2021-02

H5i

WELCOME

EUR2/APAC

H5i™

HEATED HUMIDIFIER

Welcome Guide

English • Svenska • Dansk • Norsk

• Suomi • Eesti • 简体中文 • 繁體中文

Manufacturer: ResMed Pty Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia.

See www.resmed.com for other ResMed locations worldwide. For patent information, see www.resmed.com/ip.

H5i is a trademark of ResMed and is registered in U.S. Patent and Trademark Ofﬁce.

368897r2 H5i EUR1 APAC Cover.indd 1368897r2 H5i EUR1 APAC Cover.indd 1 1/02/2021 1:19:34 PM1/02/2021 1:19:34 PM

368897 H5i Welcome Guide EUR 2 APAC.indb 2 11/09/2013 8:51:03 AM

H5i at a glance

The H5i system comprises the following elements:

• H5i heated humidifier • H5i Cleanable water tub.

Optional components include:

• ClimateLine heated tubing • ClimateLineMAX heated tubing • H5i water tub.

Travelling tips

When moving or travelling with your H5i:

• Ensure that the water tub is empty.

• Disconnect the H5i from the S9 by using the release button.

Welcome

Thank you for choosing the H5i. Before operating this device,

please read the entire Welcome and Information Guides.

Latch

Flip lid

Air outlet

H5i

Cleanable

water tub

Release

button

Flip lid

seal

ClimateLine/

ClimateLineMAX

connection port

English

368897 H5i Welcome Guide EUR 2 APAC.indb 1 11/09/2013 8:51:04 AM

Setup

1. Align your H5i with your S9 and push them together until they click into place.

2. Connect the DC plug of the power supply unit to the rear of the S9.

3. Connect the power cord to the power supply unit.

4. Plug the other end of the power cord into the power outlet.

5. Connect one end of the air tubing firmly onto the air outlet.

6. Connect the assembled mask system to the free end of air tubing.

Notes:

•Place the power supply unit away from the H5i to allow for adequate ventilation.

•For more information on assembling your mask see your mask manual.

•Recommended masks are available on www.resmed.com on the Products page under

Service & Support.

368897 H5i Welcome Guide EUR 2 APAC.indb 2 11/09/2013 8:51:12 AM

Filling the water tub

1. Slide the latch and lift open the flip lid.

2. Remove the water tub.

3. Fill the water tub (through the centre hole) with water up to the maximum water level mark (380 mL).

4. Return the water tub to the H5i.

5. Close the flip lid ensuring that it clicks into place.

1. 2. 3. 4. 5.

English

368897 H5i Welcome Guide EUR 2 APAC.indb 3 11/09/2013 8:51:16 AM

S9 basics

The control panel of your S9 device includes an LCD

screen as well as a Start/Stop button, Push dial and

the Info and Setup menu keys.

Key:

Info menu

Setup menu

Push dial

Start/Stop

Climate Control

Heated tube

Ramp

Humidity level

Home

Setup menu

Allows you to

make changes

to settings.

Info menu

Allows you to

view your sleep

statistics. Push dial

Turning the dial allows

you to scroll through

the menu and change

settings. Pushing the

dial allows you to enter

into a menu and confirm

your choice.

LCD screen

Start/Stop button

Starts or stops

treatment.

Home menu

368897 H5i Welcome Guide EUR 2 APAC.indb 4 11/09/2013 8:51:27 AM

Warming the H5i

The warm-up feature is used to pre-heat the water before starting treatment.

To start warming:

1. Navigate to the humidity level icon.

2. Push and hold for three seconds. The Warming Up status bar

isdisplayed.

You can stop warm-up at any time by pressing for at least three

seconds. You can start treatment at any time by pressing .

Note: In order to assist the heater plate in cooling, your S9 device will

continue to blow air for up to an hour after treatment has stopped.

However, you can unplug the device from the power outlet at any

time and allow the heater pate to cool without air flow.

1. From your HOME

screen, turn

until the HUMIDITY

LEVEL screen is

displayed in blue.

2. Press . The

selection is

highlighted in

orange.

3. Turn until the

humidity level

that you require is

displayed.

4. Press to

confirm your

choice.

Adjusting humidity level

Ranging from OFF to 6, you can adjust the humidity level at any time to find the setting that is most

comfortable for you. To adjust your level of humidity:

English

368897 H5i Welcome Guide EUR 2 APAC.indb 5 11/09/2013 8:51:34 AM

Getting started

1. Make sure your S9 and H5i are connected and the water tub is filled

to the maximum water level mark.

2. Adjust the humidification level if required.

3. Fit your mask as described in your mask user guide.

4. To start therapy, simply breathe into the mask and/or press .

5. Lie down and arrange the air tubing so that it is free to move if you

turn in your sleep.

6. To stop treatment at any time, remove your mask and/or press .

Notes:

•If your clinician has enabled SmartStart your device will start automatically

when you breathe into the mask and stop automatically when you remove

the mask.

•Once therapy has started a treatment screen is displayed.

368897 H5i Welcome Guide EUR 2 APAC.indb 6 11/09/2013 8:51:47 AM

Cleaning and maintenance

You should regularly carry out cleaning and maintenance as described in this section.

Disassembling the H5i

1. Slide the latch.

2. Lift open the flip lid.

3. Remove the water tub.

4. Discard any excess water from the water tub.

5. Unclip all four side latches.

6. Pull apart the tub lid, plate and base.

1. 2. 3.

4. 5. 6.

English

368897 H5i Welcome Guide EUR 2 APAC.indb 7 11/09/2013 8:51:53 AM

Daily cleaning

1. Wash the disassembled tub lid, plate and base in warm water using a mild detergent.

2. Rinse thoroughly in clean water and allow them to dry away from direct sunlight.

Note: The disassembled tub lid, plate and base may also be washed in a dishwasher on the delicate or

glassware cycle (top shelf only).

Monthly cleaning

1. Peel the flip lid seal from the flip lid and wash it in warm water using a mild detergent.

2. Wipe the exterior of the H5i with a damp cloth and mild detergent.

Reassembling the H5i

1. Place the plate back onto the base ensuring that the maximum water level mark faces up.

2. Place the tub lid back onto the plate/base ensuring that the centre holes are aligned.

3. Clip all four side latches.

4. Fill the water tub and return the water tub to the H5i.

5. Close the flip lid ensuring that it clicks into place.

Maintenance checklist

9Inspect the water tub and flip lid seal for wear and deterioration.

9Replace the water tub if any component is leaking or has become cracked, cloudy or pitted.

9Replace the flip lid seal if cracked or torn.

9Clean white powder deposits in the water tub by using a solution of one part household vinegar to 10

parts water.

1. 2. 3. 4. 5.

368897 H5i Welcome Guide EUR 2 APAC.indb 8 11/09/2013 8:51:59 AM

Inhaltsverzeichnis

Sprachen:

Andere ResMed Luftbefeuchter Handbücher

ResMed

ResMed HumidX F20 Bedienungsanleitung

ResMed

ResMed HumidAire 2i Bedienungsanleitung

ResMed

ResMed C-Series Bedienungsanleitung

ResMed

ResMed H5i Technisches Handbuch

ResMed

ResMed HumidX F20 Bedienungsanleitung

ResMed

ResMed AirSense 10 Bedienungsanleitung

ResMed

ResMed VPAP III ST-A Bedienungsanleitung

ResMed

ResMed H5i Bedienungsanleitung

ResMed

ResMed HumidAire 2i Bedienungsanleitung

ResMed

ResMed VPAP III & III ST Bedienungsanleitung

ResMed

ResMed H4i Bedienungsanleitung

ResMed

ResMed lumis series Bedienungsanleitung

ResMed

ResMed AirSense 10 Bedienungsanleitung

ResMed

ResMed S9 Escape Technisches Handbuch

ResMed

ResMed HumidAire SULLIVAN Bedienungsanleitung

ResMed

ResMed S9 Elite Technisches Handbuch

ResMed

ResMed H5i Bedienungsanleitung

ResMed

ResMed VPAP ST Bedienungs- und Sicherheitshinweise

ResMed

ResMed Humidifier Bedienungsanleitung

ResMed

ResMed Passover Bedienungsanleitung

ResMed

ResMed C-Series Bedienungsanleitung

ResMed

ResMed S8 Compact System Bedienungsanleitung

ResMed

ResMed HumidAir Bedienungsanleitung

ResMed

ResMed VPAP III ST-A Bedienungsanleitung

Beliebte Luftbefeuchter Handbücher anderer Marken

Bionaire

Bionaire CM1 Handbuch

Air-O-Swiss

Air-O-Swiss AOS 7131 Handbuch

KING

KING K 5002 Rainbow Bedienungsanleitung

Crane

Crane EE-6902 Bedienungsanleitung

Glaziar

Glaziar Ness Bedienungsanleitung

Philips

Philips DreamStation Go Abmessungen

Honeywell

Honeywell MISTMATE HUL520BC Bedienungsanleitung

Stadler Form

Stadler Form Hera Bedienungsanleitung

Hunter

Hunter 31206 Bedienungsanleitung

TaoTronics

TaoTronics TT-AH004 Bedienungsanleitung

adorini

adorini Cigar Heaven Bedienungsanleitung

Lanaform

Lanaform Aroma Bedienungsanleitung

Aprilaire

Aprilaire 800 Series Bedienungsanleitung

Pyle

Pyle SereneLife PHUMDIF8 Bedienungsanleitung

Trotec

Trotec B 200 Bedienungsanleitung

Pure Humidifier

Pure Humidifier EC Series Bedienungsanleitung

Crane

Crane EE-864 Bedienungsanleitung

air&me

air&me Solnan Bedienungsanleitung