ResMed VPAP ST Bedienungs- und Sicherheitshinweise

Global leaders in sleep and respiratory medicine www.resmed.com

VPAP™ST

VPAP™S

POSITIVE AIRWAY PRESSURE DEVICE

Welcome Guide

English • Svenska • Dansk • Norsk

• Suomi • 简体中文 • 繁體中文

368326/2 2011-04

S9 VPAP ST / S9 VPAP S

WELCOME

EUR2/APAC

Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center

Boulevard San Diego CA 92123 USA. ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other ResMed

locations worldwide.

Protected by patents: AU 697652, AU 699726, AU 713679, AU 731800, AU 756622, AU 2002306200, AU 2005200987, AU 2007252223, CA 2235939, CA

2263126, EP 0661071, EP 0858352, EP 0929336, EP 2032857, JP 3635097, JP 3638613, JP 4083154, US 6152129, US 6213119, US 6240921, US 6279569,

US 6659101, US 6945248, US 7661428, US 7866944. Other patents pending. Protected by design registrations: AU 329025, AU 330142, AU 331272, AU

332891, AU 333858, CN 200830346524.1, CN 200830346526.0, EU 1067417, JP 1377401, JP 1377402, JP 1377403, NZ 411762, NZ 413090, US D629891,

US D629892. Other design registrations pending.

S9, H5i, ClimateLine, ClimateLineMAX, SlimLine, SmartStart and VPAP are trademarks of ResMed Ltd and S9, ClimateLine, SmartStart and VPAP

are registered in U.S. Patent and Trademark Ofce.

368326 2011-03 S9 VPAP S-ST Welcome Guide - EUR2-APAC.indb 1 4/19/2011 11:18:26 AM

368326 2011-03 S9 VPAP S-ST Welcome Guide - EUR2-APAC.indb 2 4/19/2011 11:18:26 AM

Air filterDC power inlet

SD card slot

Module/Adapter port

Air outlet

VPAP at a glance

The VPAP system comprises the following elements:

• VPAP device • Air tubing • 90W power supply unit • S9 travel bag • SD card • S9 SD card

protective folder.

Optional components include:

• H5i heated humidifier • Standard air tubing • SlimLine air tubing • 3m air tubing • ClimateLine

heated air tubing • ClimateLineMAX heated air tubing • 30W power supply unit (does not support H5i) •

Power Station II battery pack • DC/DC Converter 24V/90W.

Welcome

Thank you for choosing the VPAP S or VPAP ST. Before operating this device, please read the entire

Welcome and Information Guides.

English

368326 2011-03 S9 VPAP S-ST Welcome Guide - EUR2-APAC.indb 1 4/19/2011 11:18:27 AM

Setup

1. Connect the DC plug of the power supply unit to the rear of the VPAP.

2. Connect the power cord to the power supply unit.

3. Plug the other end of the power cord into the power outlet.

4. Connect one end of the air tubing firmly onto the air outlet.

5. Connect the assembled mask system to the free end of the air tubing.

Notes:

•For more information on assembling your mask see your mask user guide.

•Recommended masks are available on www.resmed.com on the Products page

under Service & Support.

368326 2011-03 S9 VPAP S-ST Welcome Guide - EUR2-APAC.indb 2 4/19/2011 11:18:29 AM

VPAP basics

The control panel of your VPAP device includes

an LCD screen as well as a Start/Stop button,

Push dial and the Info and Setup menu keys.

Key:

Info menu

Setup menu

Push dial

Start/Stop

Climate

Control

Heated tube

Ramp

Humidity level

Home

Setup menu

Allows you to

make changes

to settings or

exit from the

menu.

Info menu

Allows you to

view your sleep

statistics or exit

from the menu. Push dial

Turning the dial

allows you to

scroll through the

menu and change

settings. Pushing the

dial allows you to

enter into a menu and

confirm your choice.

Start/Stop button

Starts or stops

treatment.

LCD screen

Displays the menus,

treatment screens and

reminders.

English

368326 2011-03 S9 VPAP S-ST Welcome Guide - EUR2-APAC.indb 3 4/19/2011 11:18:31 AM

1. From your HOME

screen, turn

until the RAMP

screen is displayed

in blue.

2. Press .

The selection is

highlighted in

orange.

3. Turn until

the ramp time

you require is

displayed.

4. Press to

confirm your

choice.

Adjusting ramp time

Designed to make the beginning of treatment more comfortable, ramp time is the period during which

the pressure increases from a low start pressure to the treatment pressure. To adjust your ramp time:

Using mask-ﬁt

You can use mask-fit to help you fit your mask properly. This feature delivers treatment pressure for a

three-minute period, prior to starting treatment, during which you can check and adjust your mask-fit to

minimise leaks.

1. Fit your mask as described in the mask user guide.

2. From your home screen, push and hold for three seconds. One of the following MASK FIT

screens is displayed:

3. If necessary, adjust your mask, mask cushion and headgear until you have a Good mask-fit.

After three minutes, the pressure reverts to the set pressure and treatment will begin. You can end

mask-fit at any time by pressing .

368326 2011-03 S9 VPAP S-ST Welcome Guide - EUR2-APAC.indb 4 4/19/2011 11:18:33 AM

Selecting the mask type

To select your type of mask:

1. Press . The SETTINGS

screen is displayed.

2. Turn until Mask is

displayed in blue.

3. Press .

The selection is highlighted

in orange.

4. Turn until the mask

setting that you require is

displayed.

5. Press to confirm your

choice.

6. Push to return to the

HOME screen.

English

368326 2011-03 S9 VPAP S-ST Welcome Guide - EUR2-APAC.indb 5 4/19/2011 11:18:35 AM

Getting started

1. Make sure the power is connected.

2. Adjust the ramp time if required.

3. Fit your mask as described in your mask user guide.

4. To start therapy, simply breathe into the mask and/or press .

5. Lie down and arrange the air tubing so that it is free to move if you

turn in your sleep.

6. To stop treatment at any time, remove your mask and/or press .

Notes:

•If your clinician has enabled SmartStart your device will start

automatically when you breathe into the mask and stop automatically

when you remove the mask.

•If power is interrupted during treatment, the device automatically

restarts therapy when power is restored.

368326 2011-03 S9 VPAP S-ST Welcome Guide - EUR2-APAC.indb 6 4/19/2011 11:18:37 AM

Viewing the treatment screens

Depending on how the system has been configured, you will see one of the following example screens

(shown in the ST mode) once therapy has started:

9H5i humidifier 9H5i humidifier

9ClimateLine or ClimateLineMAX

heated air tube

9Climate Control – Auto

9H5i humidifier

9ClimateLine or ClimateLineMAX

heated air tube

9Climate Control – Manual

9Standard VPAP without

optional accessories

9Oximetry data via the

oximeter adapter

In S and ST modes, the fixed lines on the pressure bar indicate the expiratory and inspiratory pressures.

In CPAP mode, only a set pressure is shown. While the treatment is ramping (indicated by an orange

ramp icon below the pressure bar), the pressure values appear in orange. When a set pressure is reached

these values are displayed in white.

English

368326 2011-03 S9 VPAP S-ST Welcome Guide - EUR2-APAC.indb 7 4/19/2011 11:18:38 AM

To toggle between treatment screens 1 and 2, press from your HOME screen.

9Treatment with device trigger

(Timed) and cycle (Timed,

Ti Max or Ti Min) breath

indicators

9Treatment with spontaneous

trigger and cycled breaths

Viewing the Info menu

The Info menu has a series of screens showing your sleep quality, sleep report and service information.

To view the Info menu, push from your HOME screen.

9In the Sleep Quality screen,

you can always view your

usage hours during the last

session and if enabled by

your clinician, data on mask-

fit and AHI is displayed.

9In the Sleep Report, only the

period can be changed—

other values are for display

only.

9In the Service information,

the device run hours

(includes warm-up/cool-down

times for the humidifier) and

the software identifications

are displayed.

To return to the HOME screen, push .

368326 2011-03 S9 VPAP S-ST Welcome Guide - EUR2-APAC.indb 8 4/19/2011 11:18:39 AM

Andere Handbücher für VPAP ST

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere ResMed Luftbefeuchter Handbücher

ResMed

ResMed H5i Bedienungsanleitung

ResMed

ResMed H4i Bedienungsanleitung

ResMed

ResMed lumis series Bedienungsanleitung

ResMed

ResMed VPAP ST-A Bedienungsanleitung

ResMed

ResMed H4i Bedienungsanleitung

ResMed

ResMed H4i Bedienungsanleitung

ResMed

ResMed AirSence 10 Bedienungsanleitung

ResMed

ResMed VPAP III ST-A Bedienungsanleitung

ResMed

ResMed HumidAir Bedienungsanleitung

ResMed

ResMed H5i Bedienungsanleitung

ResMed

ResMed S9 H5i Bedienungs- und Sicherheitshinweise

ResMed

ResMed S8 Compact System Bedienungsanleitung

ResMed

ResMed VPAP III & III ST Bedienungsanleitung

ResMed

ResMed HumidAire 3i Bedienungsanleitung

ResMed

ResMed HumidAire 2i Bedienungsanleitung

ResMed

ResMed H5i Bedienungsanleitung

ResMed

ResMed C-Series Bedienungsanleitung

ResMed

ResMed H4i Bedienungsanleitung

ResMed

ResMed H4i Bedienungsanleitung

ResMed

ResMed VPAP III, VPAP III ST, VPAP II Bedienungsanleitung

ResMed

ResMed H5i Bedienungs- und Sicherheitshinweise

ResMed

ResMed C-Series Bedienungsanleitung

ResMed

ResMed VPAP III ST-A Bedienungsanleitung

ResMed

ResMed H5i Bedienungsanleitung

Beliebte Luftbefeuchter Handbücher anderer Marken

Bionaire

Bionaire CM1 Handbuch

Air-O-Swiss

Air-O-Swiss AOS 7131 Handbuch

KING

KING K 5002 Rainbow Bedienungsanleitung

Crane

Crane EE-6902 Bedienungsanleitung

Glaziar

Glaziar Ness Bedienungsanleitung

Philips

Philips DreamStation Go Abmessungen

Honeywell

Honeywell MISTMATE HUL520BC Bedienungsanleitung

Stadler Form

Stadler Form Hera Bedienungsanleitung

Hunter

Hunter 31206 Bedienungsanleitung

TaoTronics

TaoTronics TT-AH004 Bedienungsanleitung

adorini

adorini Cigar Heaven Bedienungsanleitung

Lanaform

Lanaform Aroma Bedienungsanleitung

Aprilaire

Aprilaire 800 Series Bedienungsanleitung

Pyle

Pyle SereneLife PHUMDIF8 Bedienungsanleitung

Trotec

Trotec B 200 Bedienungsanleitung

Pure Humidifier

Pure Humidifier EC Series Bedienungsanleitung

Crane

Crane EE-864 Bedienungsanleitung

air&me

air&me Solnan Bedienungsanleitung