ResMed Mirage Micro Bedienungsanleitung

Mirage Micro™

nasal mask

User Guide

English • Deutsch • Français • Italiano •

Español • Português • Nederlands

English

Mirage Micro™

nasal mask

Thank you for choosing the Mirage Micro™.

Intended Use

The Mirage Micro channels airﬂow noninvasively to a patient from a positive

airway pressure device such as a continuous positive airway pressure (CPAP)

or bilevel system.

The Mirage Micro is:

to be used by adult patients (>30 kg) for whom positive airway pressure

has been prescribed.

intended for single-patient re-use in the home environment and

multipatient re-use in the hospital/institutional environment.

Before Using the Mask

WARNINGS

The vent holes must be kept clear.

Follow all precautions when using supplemental oxygen.

Oxygen ﬂow must be turned off when the ﬂow generator is not operating,

so that unused oxygen does not accumulate within the ﬂow generator

enclosure and create a risk of ﬁre.

At a ﬁxed ﬂow rate of supplemental oxygen ﬂow, the inhaled oxygen

concentration varies, depending on the pressure settings, patient breathing

pattern, mask, point of application and leak rate.

The technical speciﬁcations of the mask are provided for your clinician to

check that they are compatible with the ﬂow generator. If used outside

speciﬁcation or if used with incompatible devices, the seal and comfort of

the mask may not be effective, optimum therapy may not be achieved, and

leak, or variation in the rate of leak, may affect the ﬂow generator function.

Discontinue using the Mirage Micro if you have ANY adverse reaction to

the use of the mask, and consult your physician or sleep therapist.

Refer to your ﬂow generator manual for details on settings and operational

information.

•

France

Small (S) 16353

Medium and Large (M&L) 16354

Large-Wide and Extra-Large

(LW&XL) 16355

Europe 1

Small (S) 16338

Medium (M) 16339

Large (L) 16340

Large-Wide (LW) 16341

Extra-Large (XL) 16342

Elbow assembly (elbow, vent cover, swivel): 16396

Europe 1: English, German, French, Italian, Spanish, Portuguese, Dutch.

Flow Generator Settings

Select ‘Standard’ (or ‘Vista’ for AutoSet CS™ 2) as the mask option when

using the Mirage Micro with ResMed ﬂow generators that have mask setting

options.

Parts of the Mask & Ordering Information

Dial

61289

Vent

cover

16398

Elbow

16397

Swivel

16565

Forehead support

16393

Forehead

support pad

60123 (1)

60124 (10)

Mask cushion

16388 (S)

16389 (M)

16390 (L)

16391 (LW)

16392 (XL)

Mask frame

16395 (S)

16394 (St*)

Ports cap

16570 (2)

16571 (10)

Upper straps

Lower straps

Headgear

16118 (S)

16119 (L)

16733 (St*)

Headgear clip

16569 (2)

16734 (10)

* Standard

English

12 3

654

Turn the dial, so that the

forehead support is fully

extended.

Hold the mask over

your nose and pull the

headgear over your head.

Bringing the lower straps

below your ears, connect

the headgear clip to the

the mask frame.

Fitting the Mask

Unfasten the Velcro®,

pull the upper headgear

straps evenly until they

are comfortable and ﬁrm,

and reattach the Velcro.

Repeat step 4 with the

lower headgear straps. Connect the main air

tubing to the swivel. Then

connect the free end of

the air tubing to your ﬂow

generator and turn the

ﬂow generator on.

Lie down in your sleeping

position. Adjust the dial

until the mask is evenly

positioned on your face.

It should be comfortable,

with an effective seal.

Adjust the headgear

straps if necessary.

The ﬁtted mask is shown

above. Removing the Mask

Disconnect one of the

headgear clips and pull

the mask and headgear

up over your head.

12 3

7 8 9

4 6

(a)

(b)

Disassembling the Mask

Detach the air tubing. Unclip the headgear clips

and unthread the upper

headgear straps. It is not

necessary to remove the

headgear clips from the

headgear.

Remove the elbow

assembly from the mask

frame.

Remove the swivel from

the elbow.

Remove the vent cover

by lifting the side tabs.

Note the position on the

dial for the next time you

use the mask. Unscrew

and remove the dial (a)

then pull the forehead

support (b) out of the

mask frame.

Remove the forehead

support pads from the

forehead support.

Remove the cushion

from the mask frame. Remove the ports cap

from the mask frame.

English

Cleaning the Mask in the Home

Notes:

The mask and headgear can only be cleaned by handwashing.

The headgear may be washed without removing the headgear clips.

WARNING

Do not use aromatic-based solutions or scented oils (eg, eucalyptus

or essential oils), bleach, alcohol or products that smell strongly (eg,

citrus) to clean any of the mask components. Residual vapours from

these solutions can be inhaled if not rinsed thoroughly.They may also

damage the mask, causing cracks.

Do not iron the headgear as the material is heat sensitive and will be

damaged.

Daily/After Each Use

To optimise the mask seal, facial oils should be removed from the cushion

before use.

Handwash the mask by gently rubbing in warm (30°C) water using mild soap

or diluted dishwashing detergent.

If the vent cover requires cleaning use a soft bristle brush.

Rinse all components well with drinking quality water and allow them to air

dry out of direct sunlight. Do not soak the mask.

Weekly

Handwash the headgear in warm (30°C) water using mild soap or diluted

dishwashing detergent. Rinse well and allow it to air dry out of direct

sunlight.

Reprocessing the Mask between Patients

This mask should be reprocessed when used between patients.

Cleaning, disinfection and sterilisation instructions are available from the

ResMed website, www.resmed.com/masks/sterilization.

If you do not have Internet access, please contact your ResMed

representative.

•

5(a) (b)

(c)

31 2

23_Insert PortCaps

8 9

Push the forehead pads

ﬁrmly into the forehead

support.

Insert the forehead

support (a) into the mask

frame and screw (b) the

dial clockwise onto the

pole. Turn the dial until

it clicks (c). Ensure the

dial sits ﬂush against the

frame.

Insert the cushion into

the mask frame. Ensure

that the arrows at base

of the cushion and mask

frame are aligned.

Insert the ports cap. Reattach the top

headgear straps by

threading them through

the loops.

Turn the dial until you

reach the setting that

gives you good comfort

and seal.

Push the vent cover

onto the elbow. Make

sure both sides click into

place.

Insert the swivel into the

end of the elbow. Insert the assembled

elbow into the mask

frame.

Reassembling the Mask

English

Flexible PVC Tubing

Flexible PVC contains elements that can be detrimental to the materials of the

mask. If ﬂexible PVC tubing is used continuously, the attachment port should

be inspected for cracking. Replace any parts that are damaged.

Troubleshooting

Problem Possible reason Possible solution

Mask won’t seal

properly

or is uncomfortable

Mask may have been

ﬁtted incorrectly or is

incorrectly adjusted.

Carefully follow instructions

in “Fitting the Mask”. Check

headgear and dial are not over-

tightened. Extend dial to apply

more force to upper lip. Shorten

dial to increase force at nose

bridge.

Mask is wrong size. Talk to your clinician.

Mask cushion is

skewed in mask

frame.

Check insertion of cushion

and reinsert correctly

according to the instructions in

“Reassembling the Mask”.

Mask cushion is

misaligned or creased

on face.

Ensure cushion is properly

aligned according to the

instructions in “Reassembling

the Mask”. Make sure the

cushion has no creases in it:

undo headgear clip, check

cushion and reposition the

mask over your nose.

Mask cushion may be

dirty. Clean cushion according to

instructions in “Cleaning the

Mask in the Home”.

Mask is too noisy Mask is assembled

incorrectly. Reassemble mask.

Vents are blocked or

partially blocked. Clean vents according to

instructions in “Cleaning the

Mask in the Home”.

Dial inserted into mask

frame before forehead

support

Misassembly. Push dial base onto a hard

surface until the dial comes out

of the frame.

Technical Speciﬁcations

Note: The mask system does not contain latex, PVC or DEHP materials.

Pressure–Flow

Curve

The mask contains passive venting that meets the

requirements for protection against rebreathing as speciﬁed in

ISO 17510-2. As a result of manufacturing variations, the vent

ﬂow rate may vary.

4 6 8 10 12 14 16 18 20

Pressure

(cm H2O)

Flow

(L/min)

4 19

8 28

12 34

16 40

20 45

Vent Flow Rate (L/min)

Mask Pressure (cm H2O)

Dead Space

Information

The dead space of the mask varies according to cushion size. It

is 128 mL for the Extra Large size.

Standards CE designation in accordance with EC directive 93/42/EEC,

class IIa. ISO 14971, ISO 13485, ISO 10993-1 and ISO 17510-2.

Therapy

Pressure

4 to 20 cm H2O

Resistance Drop in pressure measured (nominal)

at 50 L/min: 0.2 cm H2O

at 100 L/min: 0.8 cm H2O

Sound DECLARED DUAL-NUMBER NOISE EMISSION VALUES in

accordance with ISO 4871. The A-weighted sound power level

of the mask is 27 dBA, with uncertainty 3 dBA. The A-weighted

sound pressure level of the mask at a distance of 1 m is

19 dBA, with uncertainty 3 dBA.

Environmental

Conditions

Operating temperature: +5°C to +40°C

Operating humidity: 10%–95% relative humidity

non-condensing

Storage and transport: -20°C to +60°C

Storage and transport humidity: 10%–95% relative humidity

non-condensing

Gross

dimensions

S: 140 mm (H) x 91 mm (W) x 93 mm (D)

M, L, LW, XL: 155 mm (H) x 91 mm (W) x 98 mm (D)

Mask fully assembled – no headgear.

Note: The manufacturer reserves the right to change these speciﬁcations

without notice.

Andere Handbücher für Mirage Micro

Inhaltsverzeichnis

Sprachen:

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed AirFit N30 Bedienungsanleitung

ResMed

ResMed AirFit P10 Bedienungsanleitung

ResMed

ResMed Astral Bedienungsanleitung

ResMed

ResMed Lumis 100 VPAP ST Bedienungsanleitung

ResMed

ResMed AirCurve 10 ST-A Bedienungsanleitung

ResMed

ResMed ApneaLink Bedienungsanleitung

ResMed

ResMed Swift FX for Her Montageanleitung

ResMed

ResMed AirCurve 10 ST-A Bedienungsanleitung

ResMed

ResMed AirSense 11 Bedienungsanleitung

ResMed

ResMed ClimateLineAir Oxy Bedienungsanleitung

ResMed

ResMed Mirage Kidsta Bedienungsanleitung

ResMed

ResMed Elisee 350 Gebrauchsanweisung

ResMed

ResMed Nox A1s Bedienungsanleitung

ResMed

ResMed Astral Mobility bag Bedienungsanleitung

ResMed

ResMed Oxygen Connector Port Bedienungsanleitung

ResMed

ResMed Mirage Kidsta Bedienungsanleitung

ResMed

ResMed Astral Series Konfigurationshandbuch

ResMed

ResMed Stellar 100 Bedienungsanleitung

ResMed

ResMed airsense 10 autoset Leitfaden

ResMed

ResMed S9 Series Bedienungsanleitung

ResMed

ResMed S8 AutoSet Spirit II Bedienungsanleitung

ResMed

ResMed lumis series Bedienungsanleitung

ResMed

ResMed AutoSet S9 Series Bedienungsanleitung

ResMed

ResMed NV Elbow F20 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung