ResMed VPAP Adapt Bedienungsanleitung

Global leaders in sleep and respiratory medicine www.resmed.com

VPAP™Adapt

POSITIVE AIRWAY PRESSURE DEVICE

H5i™

HEATED HUMIDIFIER

Welcome Guide

English

368437/1 2011-02

S9 VPAP Adapt

H5i

WELCOME

AMER

Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001

Spectrum Center Boulevard San Diego CA 92123 USA. ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See

www.resmed.com for other ResMed locations worldwide.

S9 VPAP Adapt: Protected by patents: AU 691200, AU 697652, AU 702820, AU 709279, AU 724589, AU 730844, AU 734771,

AU 736723, AU 750095, AU 750761, AU 761189, AU 764761, AU 779327, AU 2003236487, AU 2006225224, AU 2007252223, EP

0651971, EP 0661071, EP 0920845, EP 0927538, EP 0934723, EP 1028769, EP 1083953, EP 1126893, EP 1144036, EP 1502618, JP

3580776, JP 3737698, JP 3778797, NZ 504595, NZ 570415, US 5704345, US 6138675, US 6240921, US 6363933, US 6367474, US

6425395, US 6502572, US 6532959, US 6591834, US 6675797, US 6745768, US 6817361, US 6951217, US 6988498, US 7040317,

US 7077132, US 7100608, US 7537010, US 7770579. Other patents pending.

Protected by design registrations: AU 329025, AU 330142, AU 331272, AU 332891, AU 333858, CN 200830346524.1, CN

200830346526.0, EU 1067417, JP 1377401, JP 1377402, JP 1377403, NZ 411762, NZ 413090, US D629891, US D629892. Others

pending.

S9 VPAP Adapt, H5i, ClimateLine, ClimateLineMAX, SlimLine and SmartStart are trademarks of ResMed Ltd and S9, ClimateLine,

SmartStart and VPAP are registered in U.S. Patent and Trademark Ofce.

368437 S9 VPAP Adapt Welcome Guide AMER Multi.indb 1 2/25/2011 1:19:19 PM

368437 S9 VPAP Adapt Welcome Guide AMER Multi.indb 2 2/25/2011 1:19:20 PM

Air filter

DC power inlet

SD card slot

Module/Adapter port

Air outlet

S9 at a glance

The S9 system comprises the following elements:

• S9 device • Air tubing • 90W power supply unit • S9 Travel bag • SD card • S9 SD card protective

folder.

Optional components include:

• H5i heated humidifier • Standard air tubing • SlimLine air tubing • 3m air tubing • ClimateLine

heated air tubing • ClimateLineMAX heated air tubing • 30W power supply unit (does not support H5i) •

DC/DC Converter 24V/90W • Power Station II battery pack.

Traveling with the S9

When traveling you may choose to leave behind your H5i and take your S9 device only. If this is the

case, ensure you pack the SlimLine, Standard or 3m air tubing in your travel bag, as the ClimateLine or

ClimateLineMAX heated air tubing is not designed to connect directly to the S9 device.

Welcome

Thank you for choosing the S9 VPAP Adapt or H5i. Before operating this device, please read the entire

Welcome and Information Guides.

English

H5i at a glance

The H5i system comprises the following elements:

• H5i heated humidifier • H5i water tub • ClimateLineMAX heated air tubing (if sold as a Climate Control

Kit)

Optional components include:

• ClimateLine heated air tubing • H5i cleanable water tub.

Traveling tips

When moving or traveling with your H5i:

• Ensure that the water tub is empty.

• Disconnect the H5i from the S9 by using the release button.

Latch

Flip lid

Air outlet

H5i water tub

Release

button

Flip lid seal

ClimateLine or

ClimateLineMAX

connection port

Setup

1. Align your H5i with your S9 and push them together until they click into place.

2. Connect the DC plug of the power supply unit to the rear of the S9.

3. Connect the power cord to the power supply unit.

4. Plug the other end of the power cord into the power outlet.

5. Connect one end of the air tubing firmly onto the air outlet.

6. Connect the assembled mask system to the free end of the air tubing.

Notes:

•For more information on assembling your mask see your mask user guide.

•Recommended masks are available on www.resmed.com on the Products page under Service &

Support.

English

1234 5

Filling the water tub

1. Slide the latch and lift open the flip lid.

2. Remove the water tub.

3. Fill the water tub (through the center hole) with distilled or deionized water up to the maximum water

level mark (380 mL).

4. Return the water tub to the H5i.

5. Close the flip lid ensuring that it clicks into place.

Info menu

Allows you to

view your sleep

statistics or exit

from the menu.

LCD screen

Displays the menus,

treatment screens and

reminders.

Setup menu

Allows you to

make changes

to settings or

exit from the

menu.

Push dial

Turning the dial

allows you to

scroll through the

menu and change

settings. Pushing the

dial allows you to

enter into a menu and

confirm your choice.

Start/ Stop

button

Starts or stops

treatment.

S9 basics

The control panel of your S9 device includes

an LCD screen as well as a Start/Stop button,

Push dial and the Info and Setup menu keys.

Key:

Info menu

Setup menu

Push dial

Start/ Stop

Climate Control

Heated tube

Ramp

Humidity level

Home

English

Adjusting humidity level

Ranging from OFF to 6, you can adjust the humidity level at any time to find the setting that is most

comfortable for you. To adjust your level of humidity:

Warming the H5i

The warm-up feature is used to pre-heat the water before starting

treatment.

To start warming:

1. Navigate to the humidity level icon.

2. Push and hold for three seconds. The Warming Up status

bar is displayed.

You can stop warm-up at any time by pressing for at least three

seconds. You can start treatment at any time by pressing .

Note: In order to assist the heater plate in cooling, your S9 device will

continue to blow air for up to an hour after treatment has stopped.

However, you can unplug the device from the power outlet at any time and

allow the heater plate to cool without air flow.

1. From your HOME

screen, turn

until the HUMIDITY

LEVEL screen is

displayed in blue.

2. Press .

The selection is

highlighted in

orange.

3. Turn until

the humidity level

that you require is

displayed.

4. Press to

confirm your choice.

Adjusting ramp time

Designed to make the beginning of treatment more comfortable, ramp time is the period during which

the pressure increases from a low start pressure to the treatment pressure. To adjust your ramp time:

1. From your HOME

screen, turn

until the RAMP

screen is displayed

in blue.

2. Press .

The selection is

highlighted in

orange.

3. Turn until the

ramp time you

require is displayed.

4. Press to

confirm your choice.

Using mask-ﬁt

You can use mask-fit to help you fit your mask properly. This feature delivers treatment pressure for a

three-minute period, prior to starting treatment, during which you can check and adjust your mask-fit

to minimize leaks.

1. Fit your mask as described in the mask user guide.

2. From your HOME screen, push and hold for three seconds.

One of the following MASK FIT screens is displayed:

3. If necessary, adjust your mask, mask cushion and headgear until you have a Good mask-fit.

After three minutes, the pressure reverts to the set pressure and treatment will begin. You can end

mask-fit at any time by pressing .

English

Selecting the mask type

To select your type of mask:

1. Press . The SETTINGS

screen is displayed.

2. Turn until Mask is

displayed in blue.

3. Press . The selection is

highlighted in orange.

4. Turn until the mask

setting that you require is

displayed.

5. Press to confirm your

choice.

6. Push to return to the

HOME screen.

Andere Handbücher für VPAP Adapt

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ResMed Atemwegsprodukt Handbücher

ResMed

ResMed Quattro FX NV Bedienungsanleitung

ResMed

ResMed Mirage Activa Bedienungsanleitung

ResMed

ResMed Mirage FX Bedienungsanleitung

ResMed

ResMed VPAP S Bedienungsanleitung

ResMed

ResMed VPAP III, VPAP III ST, VPAP II Bedienungsanleitung

ResMed

ResMed Positive Airway Pressure Device S8 Bedienungsanleitung

ResMed

ResMed Full Face Mask Mirage Quattro Bedienungsanleitung

ResMed

ResMed AirFit F20 Bedienungsanleitung

ResMed

ResMed Mirage Activa LT Bedienungsanleitung

ResMed

ResMed FAX-TR177 Bedienungsanleitung

ResMed

ResMed Nasal Mask Mirage Micro Bedienungsanleitung

ResMed

ResMed AutoSet Bedienungsanleitung

ResMed

ResMed Positive AirwAy Pressure Device S8 Series II Bedienungsanleitung

ResMed

ResMed Ultra Mirage Bedienungsanleitung

ResMed

ResMed NV Elbow F20 Bedienungsanleitung

ResMed

ResMed Lumis HFT Bedienungsanleitung

ResMed

ResMed Mirage NV Full Face Mask Series 2 Bedienungsanleitung

ResMed

ResMed Mirage Micro Bedienungsanleitung

ResMed

ResMed Swift FX Nano Bedienungsanleitung

ResMed

ResMed Positive AirwAy Pressure Device S8 Elite II Bedienungsanleitung

ResMed

ResMed Mirage Quattro Bedienungsanleitung

ResMed

ResMed Quattro FX NV Bedienungsanleitung

ResMed

ResMed C16389 Bedienungsanleitung

ResMed

ResMed AirFit F30 Bedienungsanleitung

Beliebte Atemwegsprodukt Handbücher anderer Marken

Omron

Omron COMP A-I-R NE-C801 Bedienungsanleitung

CERES

CERES nosko nebulizer kit Bedienungsanleitung

Dr.Frei

Dr.Frei NE-SM1 Bedienungsanleitung

North

North 5400 series Bedienungsanleitung

John Bunn

John Bunn Neb-u-Lite LX2 Bedienungsanleitung

DeVilbiss

DeVilbiss UltraNeb Bedienungsanleitung

Sperian

Sperian Panther Hip-Pac P9684 Series Bedienungsanleitung

Dräger

Dräger X-plore 6570 Bedienungsanleitung

3M 8000 Series Bedienungsanleitung

Respironics

Respironics SideStream HS860 Bedienungsanleitung

Sundstrom

Sundstrom SR 500 Bedienungsanleitung

JARDIBRIC

JARDIBRIC KPBRU20 Bedienungsanleitung

Ombra

Ombra 63506 Bedienungsanleitung

Lotus

Lotus M-9520A Bedienungsanleitung

Philips

Philips Respironics EE Leak 1 AF541 Bedienungsanleitung

EVOLU

EVOLU Nano AiR MINI Bedienungsanleitung

Ambu

Ambu SPUR II Bedienungsanleitung

MSA AUER

MSA AUER 3S-PF Bedienungsanleitung