Riccar Pristine Bedienungsanleitung

O w n e r ’ s M a n u a l

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including

the following:

READ ALL INSTRUCTIONS BEFORE

USING THIS APPLIANCE

The manufacturer cannot accept responsibility for damage

caused when the appliance is not used according to the

instructions, or for uses other than those for which it

was intended.

To reduce the risk of fire, electric shock or injury:

• Do not leave appliance when plugged in.

Unplug from outlet when not in use and

before servicing.

• WARNING: ELECTRIC SHOCK COULD

OCCUR IF USED OUTDOORS OR ON

WET SURFACES.

• Do not allow to be used as a toy. Close

attention is necessary when used by or

near children.

• Use only as described in this manual.

Use only manufacturer’s recommended

attachments.

• Do not use with damaged cord or plug. If

appliance is not working as it should, has

been dropped, damaged, left outdoors,

or dropped into water, return it to your

Authorized Retailer for service.

• Do not pull or carry by cord, use cord as

a handle, close a door on the cord, or pull

cord around sharp edges or corners. Do

not run appliance over cord. Keep cord

away from heated surfaces.

• Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

• Hold plug when rewinding the power cord

to prevent the cord from whipping.

• Do not handle plug or appliance with

wet hands.

• Do not put any object into openings. Do

not use with any opening blocked; keep

free of dust, lint, hair and anything that

may reduce air ﬂow.

• Keep hair, loose clothing, ﬁngers and all

parts of body away from openings and

moving parts.

• Do not pick up anything that is burning or

smoking, such as cigarettes, matches or

hot ashes.

• Do not use without vacuum bag in place.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs.

• Do not use to pick up ﬂammable or

combustible liquids such as gasoline or

use in areas where they may be present.

• Do not attempt to service the unit while

appliance is plugged in.

• Do not use vacuum to pick up water or

any wet materials.

SAVE THESE INSTRUCTIONS.

WARNING:

Contents

Safety Precautions 4

Replacing Vacuum Bag and Filters 5

Description and Operation 6-8

Using the Full Size Power Nozzle 9-12

Troubleshooting Guide 13

Owner’s Information 14

Warranty 15

Safety Precautions

This vacuum cleaner should be used for normal, dry household dust and dirt. The manufacturer

cannot be held responsible for any damage caused by use or operation of the vacuum contrary

to these instructions. If the vacuum is wrongly operated for a purpose other than that for which

it is intended, no liability can be accepted for any possible damage.

• Do not vacuum areas which contain moisture or water, flammable matter, needles, pins,

razor blades, matches, cigarettes, etc., since they may damage the vacuum or vacuum bag.

• When rewinding the power cord, hold the plug before pressing the cord rewind button to

prevent the cord from whipping.

• Make sure a vacuum bag and filters are always in place.

• This product is equipped with a polarized alternating current line plug (a plug having one

blade wider than the other). This plug fits into the power outlet only one way. This is a safety

feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the

plug should still fail to fit, contact an electrician to replace the obsolete outlet. Do not defeat

the safety purpose of the polarized plug.

Replacing Vacuum Bag and Filters

Replacing the vacuum bag

Change the vacuum bag when the full bag indicator

light is flashing RED or suction power is weak. The

bag compartment will not close without a bag in the

unit or if the bag is not properly installed.

1. Open the bag compartment.

2. Pull the tab on the cardboard bag collar, closing

the bag while removing it from the bag holder.

3. Remove and discard the used bag. NOTE:

The Performance HEPA™ bag cannot be reused.

4. Slide a new bag into the bag holder until it

clicks into place.

Replacing the secondary filter

1. Open the bag compartment and locate

the filter behind the vacuum bag. For

better access to the secondary filter,

remove the bag.

2. Pull the filter holder out toward you.

3. Remove the used filter and replace it with

a new filter.

4. Slide the filter holder back in place and

replace the bag.

Replacing the HEPA filter

1. Locate the HEPA filter inside the bag

compartment near the door hinge.

2. Lift up the black tab to remove the used filter

and snap in a new filter. NOTE: The HEPA

filter cannot be washed and reused.

Description and Operation

Hose Adapter

• When separating the

hose from the canister

body, pull the hose

adapter while pressing

the buttons.

Power Nozzle

Wand

Storage

• Insert the tab on the neck of the

wand into either groove on

canister body to store

the wand.

On/Off Switch

Hard Surface Floor Tool

• For use on tile, hard wood

and linoleum floors.

Wand Release Collar

3-n-1 Tool

• The single tool

conveniently converts

from a premium

dusting brush to a

deluxe upholstery tool

to a crevice tool.

Power Control

On-Board Cleaning Tools

Dusting

Brush

Upholstery

Tool

Crevice

Tool

Handle

On/Off Switch

3-n-1 Tool

Full Bag Indicator Light

• If the flashing red indicator light appears:

- Change the vacuum bag

- If the vacuum bag is not full, but the full bag

indicator light is flashing red, check the hose

for a clog.

• When cleaning with a tool (dusting brush, upholstery

tool or crevice tool), the flashing red indicator light

may appear. In this case, continue cleaning.

Cord RewindOn/Off Switch

Description Continued

Power Nozzle

Handle Release Pedal

Jam Indicator Warning Light

Power Nozzle

Telescopic Wand

On/Off Switch

Xenon Headlight

Telescopic Wand

Handle

Wand Extension Grip (to extend wand)

Wand Release Collar

Height Indicator Window

Height Adjustment Pedal

Handle

Soft Furniture Guard

Wand Release Collar

Wand Release Button

Wand Extension Grip (to extend wand)

Turning On the Power Nozzle

The power nozzle can only be turned on if

the canister is also turned on (canister on /

off switch is located on the main body). The

power nozzle on / off switch is located on the

handle. Simply press the switch forward to

engage the power nozzle.

Using the Power Nozzle

After turning on the canister and power

nozzle, lower the wand by pressing the left

pedal on the back side of the power nozzle.

Removing and Inserting the Wand

Removing the wand from the power nozzle

allows you to use cleaning tools for baseboard

or ceiling cleaning. To do this, first turn the

power nozzle and canister off. Then, press

the wand release collar pictured below and

pull the wand out.

To reinsert the wand into the power nozzle,

simply press the wand back into the neck of

the power nozzle. The wand will then “click”

into place.

Carpet Height Adjustment

Your power nozzle has six different settings

to clean a variety of carpet types and floor

surfaces. To adjust the carpet height setting

of the power nozzle, press the right pedal

located on the back of the power nozzle.

Each press of this pedal will adjust the height

to the next carpet height position.

To determine which setting you are currently

on, look through the height indicator window

on the top of the unit. You will see one of the

six settings detailed below:

Setting: Intended Use:

1. XHI Very plush carpet

2. HI Plush carpet

3. Auto General carpet thickness

or bare floors

4. MED Medium pile carpet

5. LO Low pile carpet

6. XLO Indoor/Outdoor carpet

Using the Full Size Power Nozzle

Carpet Height Adjustment Tips: When using

the power nozzle, start on the “Auto” setting.

If pushing the power nozzle feels difficult, then

adjust to a higher setting. If the power nozzle

feels very easy to push, you may want to lower

the power nozzle for more effective cleaning.

The “Auto” setting is the recommended setting

for hard floor surfaces (i.e. tile, vinyl, wood).

Warning Light

Your power nozzle is equipped with a circuit

breaker safety system that protects it from a

jammed situation. Common items that cause

jammed brushrolls include socks, excessive

threads, corners of area rugs, etc. The warning

indicator light on top of the unit will change from

green to red should this condition occur.

If the circuit breaker trips:

• Turn off the vacuum cleaner and power nozzle

then unplug the power cord.

• Remove the object preventing the brushroll

from turning.

• Locate the circuit breaker switch on the back

of the power nozzle and press it to reset the

breaker. When the unit is turned back on, the

warning light should be green.

If the breaker trips again, repeat these steps

again to correct the problem. If this does not

correct the problem, contact your authorized

Riccar retailer for further assistance.

Inhaltsverzeichnis

Andere Riccar Staubsauger Handbücher

Riccar

Riccar SQUIRE Bedienungsanleitung

Riccar

Riccar SupraLite Plus Bedienungsanleitung

Riccar

Riccar R25D Bedienungsanleitung

Riccar

Riccar RC-705D Bedienungsanleitung

Riccar

Riccar 1800 Bedienungsanleitung

Riccar

Riccar Carpet Keeper Bedienungsanleitung

Riccar

Riccar Vibrance R20S Bedienungsanleitung

Riccar

Riccar Prima R50SS Bedienungsanleitung

Riccar

Riccar Radiance RAD Bedienungsanleitung

Riccar

Riccar 1800 Bedienungsanleitung

Riccar

Riccar PRIMAP.CPN Bedienungsanleitung

Riccar

Riccar Vibrance VIB Bedienungsanleitung

Riccar

Riccar RC 1100 Bedienungsanleitung

Riccar

Riccar R-SERIES R500 R500 Bedienungsanleitung

Riccar

Riccar Vibrance Bedienungsanleitung

Riccar

Riccar 8000 series Bedienungsanleitung

Riccar

Riccar OMNICLEAN OC1 Bedienungsanleitung

Riccar

Riccar Prima Bedienungsanleitung

Riccar

Riccar Moonlight Bedienungsanleitung

Riccar

Riccar SUPRAQUIK RSQ1 Bedienungsanleitung

Riccar

Riccar Starbright Bedienungsanleitung

Riccar

Riccar 8900 Bedienungsanleitung

Riccar

Riccar Brilliance R30D Bedienungsanleitung

Riccar

Riccar RC 1400 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung