Ricoh 4700WD Gebrauchsanweisung

Paper type: Joushitsu 55kg , paper thickness=80 µm // Pages in book=36 // Print scale=81%

Gap (when printed at 81% scale) = Pages in book ×Paper thickness = 0 mm

4700W OperatingInstructionsSystem Settings

Operating Instructions

System Settings

Read this manual carefully before you use this product and keep it handy for future

reference.

For safety, please follow the instructions in this manual.

Printed in The Netherlands

EE GB B010-8700

Paper type: Joushitsu 55kg , paper thickness=80 µm // Pages in book=36 // Print scale=81%

Gap (when printed at 81% scale) = Pages in book ×Paper thickness = 0 mm

Declaration of Conformity

“The Product complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage

Directive 73/23/EEC.”

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:

ameans POWER ON.

cmeans STAND BY.

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information in the Copy Reference before using this machine. It contains im-

portant information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety

This machine contains LED Arrey in scanner and writing units.

The machine is considered a class 1 LED device, safe for both office and EDP use.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, Ricoh recommends that you use genuine Ricoh toner.

Ricoh shall not be responsible for any damage or expense that might result from the use of parts other

than genuine Ricoh parts in your Ricoh office product.

Power Source

220 - 240V, 50Hz/60Hz, 10A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see “Power Connection”in the Copy Reference manual.

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information in the Copy Reference before using this machine. It contains im-

portant information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety

This machine contains LED Arrey in scanner and writing units.

The machine is considered a class 1 LED device, safe for both office and EDP use.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, Rex-Rotary recommends that you use genuine Rex-Rotary toner.

Rex-Rotary shall not be responsible for any damage or expense that might result from the use of parts

other than genuine Rex-Rotary parts in your Rex-Rotary office product.

Power Source

220 - 240V, 50Hz/60Hz, 10A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see “Power Connection”in the Copy Reference manual.

Read this manual carefully before you use this product and keep it handy for future reference.

For safety, please follow the instructions in this manual.

DolphinGB-Syst-F_V4_FM.book Page 1 Wednesday, May 2, 2001 1:19 PM

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information in the Copy Reference before using this machine. It contains im-

portant information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety

This machine contains LED Arrey in scanner and writing units.

The machine is considered a class 1 LED device, safe for both office and EDP use.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, Gestetner recommends that you use genuine Gestetner toner.

Gestetner shall not be responsible for any damage or expense that might result from the use of parts

other than genuine Gestetner parts in your Gestetner office product.

Power Source

220 - 240V, 50Hz/60Hz, 10A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see “Power Connection”in the Copy Reference manual.

Read this manual carefully before you use this product and keep it handy for future reference.

For safety, please follow the instructions in this manual.

DolphinGB-Syst-F_V4_FM.book Page 1 Wednesday, May 2, 2001 1:19 PM

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information in the Copy Reference before using this machine. It contains im-

portant information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes

Some illustrations may be slightly different from your machine.

Certain options may not be available in some countries. For details, please contact your local dealer.

Operator Safety

This machine contains LED Arrey in scanner and writing units.

The machine is considered a class 1 LED device, safe for both office and EDP use.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, Nashuatec recommends that you use genuine Nashuatec toner.

Nashuatec shall not be responsible for any damage or expense that might result from the use of parts

other than genuine Nashuatec parts in your Nashuatec office product.

Power Source

220 - 240V, 50Hz/60Hz, 10A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see “Power Connection”in the Copy Reference manual.

Read this manual carefully before you use this product and keep it handy for future reference.

For safety, please follow the instructions in this manual.

DolphinGB-Syst-F_V4_FM.book Page 1 Wednesday, May 2, 2001 1:19 PM

Declaration of Conformity

“The Product complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage

Directive 73/23/EEC.”

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:

ameans POWER ON.

cmeans STAND BY.

DolphinGB-Syst-F_V4_FM.book Page 1 Wednesday, May 2, 2001 1:19 PM

ENERGY STAR Program

❖

❖❖

❖Low Power mode

This product automatically lowers its power consumption 15 minutes after

the last copying or printing job has been completed. Printing is available in

this mode, but if you use the copier, press the {Clear Modes/Energy Saver}key.

• For details about how to change the default interval before entering Low

Power mode, see p.25 “Energy Saver Timer”

❖

❖❖

❖Auto Off mode (Copier only)

To conserve energy, this product automatically turns off 60 minutes after the

last copying or printing job has been completed. Printing is available in this

mode, but if you use the copier, press the operation switch.

• For details about how to change the default interval before entering Auto

Off mode, see p.26 “Auto Off Timer”

❖

❖❖

❖Sleep mode (Printer installed)

If the printer feature is installed, this product automatically lowers its power

consumption even further 60 minutes after the last copy or print job has fin-

ished. Printing is still possible in Sleep mode, but if you wish to make copies

press the operation switch first.

• For details about how to change the default interval that the machine waits

before entering Sleep mode, see p.26 “Auto Off Timer”

As an ENERGY STAR Partner, we have determined

that this machine model meets the ENERGY STAR

Guidelines for energy efficiency.

The ENERGY STAR Guidelines intend to establish an international energy-saving system for

developing and introducing energy-efficient office equipment to deal with environmental is-

sues, such as global warming.

When a product meets the ENERGY STAR Guidelines for energy efficiency, the Partner shall

place the ENERGY STAR logo onto the machine model.

This product was designed to reduce the environmental impact associated with office equip-

ment by means of energy-saving features, such as Low-power mode.

DolphinGB-Syst-F_V4_FM.book Page i Wednesday, May 2, 2001 1:19 PM

Specification

Recycled paper

In accordance with the ENERGY STAR Program, we recommended use of recy-

cled paper which is environment friendly. Please contact your sales representa-

tive for recommended paper.

Low Power mode Power consumption 200Wh or less

Default interval 15 minutes

Recovery time –

Auto Off mode Power consumption 65Wh or less

Default interval 60 minutes

Sleep mode Power consumption 65Wh or less

Default interval 60 minutes

DolphinGB-Syst-F_V4_FM.book Page ii Wednesday, May 2, 2001 1:19 PM

iii

How to Read this Manual

Symbols

In this manual, the following symbols are used:

WARNING:

This symbol indicates a potentially hazardous situation that might result in

death or serious injury when you misuse the machine without following the in-

structions under this symbol. Be sure to read the instructions, all of which are de-

scribed in the Safety Information section.

CAUTION:

This symbol indicates a potentially hazardous situation that might result in mi-

nor or moderate injury or property damage that does not involve personal injury

when you misuse the machine without following the instructions under this

symbol. Be sure to read the instructions, all of which are described in the Safety

Information section.

* The statements above are notes for your safety.

Important

If this instruction is not followed, paper might be misfed, originals might be

damaged, or data might be lost. Be sure to read this.

Preparation

This symbol indicates the prior knowledge or preparations required before op-

erating.

Note

This symbol indicates precautions for operation, or actions to take after misop-

eration.

Limitation

This symbol indicates numerical limits, functions that cannot be used together,

or conditions in which a particular function cannot be used.

Reference

This symbol indicates a reference.

[]

Keys that appear on the machine's panel display.

{}

Keys built into the machine's operation panel.

DolphinGB-Syst-F_V4_FM.book Page iii Wednesday, May 2, 2001 1:19 PM

Terms in this Manual

Guide to Option Components

In this manual, the following abbreviations are used.

•Roll Holder Unit Type A →Roll holder

•2nd Roll Tray Type A →Lower tray

•Stamp Board Type A →Stamp board

•Original Tray Type G →Original Tray

•Hard Disk Drive Option Type 470 →HDD

•Printer Controller RW-470 →Controller

DolphinGB-Syst-F_V4_FM.book Page iv Wednesday, May 2, 2001 1:19 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ricoh Multifunktionsdrucker Handbücher

Ricoh

Ricoh PRIPORT VT2130 Bedienungsanleitung

Ricoh

Ricoh DX 4542 Bedienungsanleitung

Ricoh

Ricoh Pro C651EX Bedienungsanleitung

Ricoh

Ricoh MP C401 Bedienungsanleitung

Ricoh

Ricoh LF 125 (H915) Bedienungsanleitung

Ricoh

Ricoh aficio 1013 Bedienungsanleitung

Ricoh

Ricoh RN-MF1 Bedienungsanleitung

Ricoh

Ricoh Pro C5110 Series Bedienungsanleitung

Ricoh

Ricoh Aficio MP 5500 S/P Gebrauchsanweisung

Ricoh

Ricoh Aficio MP 6002 Bedienungsanleitung

Ricoh

Ricoh Aficio MP C2500 Series Service-Handbuch

Ricoh

Ricoh SP 311SFN Bedienungsanleitung

Ricoh

Ricoh Pro 907 Bedienungsanleitung

Ricoh

Ricoh A292 Bedienungsanleitung

Ricoh

Ricoh Aficio MP 5002SP Bedienungsanleitung

Ricoh

Ricoh Aficio 2232C Bedienungsanleitung

Ricoh

Ricoh MP C4503 Service-Handbuch

Ricoh

Ricoh Aficio MP C3500 EFI Gebrauchsanweisung

Ricoh

Ricoh PRIPORT JP1210 Bedienungsanleitung

Ricoh

Ricoh Aficio AP3200 Bedienungsanleitung

Ricoh

Ricoh DDP70E-92 Bedienungsanleitung

Ricoh

Ricoh MFD Bedienungsanleitung

Ricoh

Ricoh MP CW2201sp Bedienungsanleitung

Ricoh

Ricoh B230 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung