Ricoh MP CW2200SP Bedienungsanleitung
MFD User Guide
Ver 1
MP CW2200SP
User Guide
CONTENTS
CONTROL PANEL Page 3
An overview of the function buttons.
LOADING PAPER Page 5
How to load paper rolls correctly into the machine.
FEEDING ORIGINALS Page 10
How to feed original documents. How to stop the machine feeding.
MFD BASICS Page 11
Explains some of the most commonly used hard buttons.
COPIER
Copier Basics Page 12
Explains some of the key copy features.
Reduce & Enlarge Page 13
Reduce and enlarge different sized documents.
Storing a document Page 14
Save documents onto the MFD hard drive.
DOCUMENT SERVER
Retrieving documents Page 16
Print documents that have been saved onto the MFD hard drive.
PRINTER
Print Settings Overview Page 17
Explains some of the key print features.
Creating One-Click Presets Page 18
Demonstrates how to save your print settings as one-click icons.
Locked Print Page 19
Locked Print is particularly useful for confidential / secure printing.
Jobs will not be printed out until the user enters a user code at the MFD to release it.
SCANNER
Scan to Email Page 22
Scan a document and email it to a designated email address.
Saving Email Shortcuts Page 23
Set up shortcut buttons for commonly used email addresses.
Scan to Folder Page 26
Scan a document to a shared folder on the server.
Naming a file Page 27
Rename the scan file at the MFD.
CONTROL PANEL
1. [Home] key
Press to display the [Home] screen. .
2. Function keys
No functions are registered to the function keys as a factory default. You can register often used
functions, programs, and Web pages.
3. Display panel
Displays keys for each function, operation status, or messages
4. [Reset] key
Press to clear the current settings.
5. [Program] key (Copier, Document Server, Scanner mode)
Press to register frequently used settings, or to recall registered settings. Also press to program
defaults for the initial display when modes are cleared or reset, or immediately after the main power
switch is turned on.
CONTROL PANEL
6. Main power indicator
The main power indicator goes on when you turn on the main power switch.
7. [Energy Saver] key
Press to switch to and from Low Power mode or Sleep mode. When the machine is in Low Power
mode, the [Energy Saver] key is lit. In Sleep mode, the [Energy Saver] key flashes slowly.
8. [Login/Logout] key
Press to log in or log out.
9. [User Tools/Counter] key
Press to change the default settings to meet your requirements. You can find out where to order
expendable supplies and where to call when a malfunction occurs. You can also print these details.
You can also check and print counter readings here.
10. [Simple Screen] key
Press to switch to the simple screen. When you press the {Simple Screen} key, the screen chang-
es to the simple screen. Letters and keys are displayed at a larger size, making operations easier.
Certain keys do not appear on the simple screen.
11. [ # ] key (Enter key)
Press to confirm values entered or items specified.
12. [Start] key
Press to start copying, printing, scanning, or sending.
13. [Sample Copy] key
Press to make a single set of copies or prints to check print quality before making multiple sets.
14. [Stop] key
Press to stop a job in progress, such as copying, scanning or printing.
15. [Clear] key
Press to delete a number entered.
16. Number keys
Use to enter the numbers for copies and data for the selected function.
17. [Check Status] key
Press to check the machine's system status, operational status of each function, and current jobs.
You can also display the job history and the machine's maintenance information.
18. Data In indicator (printer mode)
Flashes when the machine is receiving print jobs from a computer.
19,20. Media slots
Use to insert an SD card or a USB flash memory device.
LOADING PAPER
Press the [Home] key and
then select ‘Copier’ on the
screen. Ensure the “Ready”
message appears on screen.
Lift up the paper input location
cover until it clicks.
Remove the bar in front of
Paper Input Location 1.
Then hook it in front of the
output location.
❶
❷
❸
❹
1. Left flange
2. Spool
3. Paper Roll Adjustment levers
4. Right flange
5. Lock lever PART NAMES
LOADING PAPER
Pull the bar in front of Paper
Input Location 2 forward.
If there is paper loaded, press
down the rewind button to the
right of Paper Input Location 1
for a couple of seconds. Once
you release, the paper is auto-
matically rewound. No paper?
Proceed to step 11.
Make sure the edge of the
paper has been fully fed out of
the machine. Hold both flanges
and using both hands, move
the roll onto the flat areas in
front of the bearing (inset).
Then remove it entirely.
Place the roll on a flat surface.
Raise the lock lever on the
left flange.
❺
❻
❼
❽
LOADING PAPER
❾
❿
⓫
⓬
Remove the left flange from
the spool.
Remove both the right flange
and spool from the paper roll.
Adjust the paper roll
adjustment levers on both
flanges according to the core
(size) of the paper roll you
want to load.
Insert the flange with the spool
from the right side of the paper
roll until it touches the end of
the paper.
LOADING PAPER
⓭
⓮
⓯
⓰
Insert the spool into the left
flange.
Holding the right flange, insert
the left flange until it touches
the end of the paper.
Lower the lock lever on the left
flange.
Place the paper roll on the flat
place in front of the bearing.
Then move the right hand
edge and left hand edges of
the shaft into the bearing.
If loading a 50.8mm (2 inches)
paper roll, make sure that all
six adjustment levers are fully
open. When loading a 76.2mm
(3 inches) paper roll, proceed
to step 17.
LOADING PAPER
⓱
⓲
⓳
⓴
Feed the paper roll (1) so that
the paper goes over the
guides (2) behind the paper
roll and under the rollers of the
paper feeding slit.
Keep rotating the paper slowly
until the paper is automatically
pulled inside the machine and
the beeper sounds.
Push the bar in front of paper
input location 2 into the
machine (1). Then lift the bar
of the output basket up and
hook it in front of Paper Roll 1
(2)
Lower the paper input location
cover. Now follow the on
screen instructions to finish.
222
FEEDING ORIGINALS
Adjust the original guides
so they are flush against
the original. They should
be the same distance
from the centre.
Documents should be
inserted FACE DOWN
between the original
guides. Support with
both hands until it feeds
in.
Use the [Scanner Stop]
button if documents are
jamming or not feeding
correctly.
❶
❷
❸
Andere Handbücher für MP CW2200SP
1
Inhaltsverzeichnis
Andere Ricoh Drucker Handbücher
Ricoh
Ricoh SP 210 Bedienungsanleitung
Ricoh
Ricoh INFOPRINT COLOR 1754 EXPRESS Bedienungsanleitung
Ricoh
Ricoh InfoPrint 6500 Bedienungsanleitung
Ricoh
Ricoh Aficio GX7000 Bedienungsanleitung
Ricoh
Ricoh Aficio SP C320DN Montageanleitung
Ricoh
Ricoh Aficio SP 100 Handbuch
Ricoh
Ricoh Pro C9200 Installationsanleitung
Ricoh
Ricoh MLP150DN Bedienungsanleitung
Ricoh
Ricoh INFOPRINT 1811 Bedienungsanleitung
Ricoh
Ricoh Aficio GX3000 Bedienungsanleitung
Ricoh
Ricoh Ri 4000 Bedienungsanleitung
Ricoh
Ricoh CL7000 - Aficio D Color Laser Printer Bedienungsanleitung
Ricoh
Ricoh MP C6502SP Benutzerhandbuch
Ricoh
Ricoh Ri 4000 Bedienungsanleitung
Ricoh
Ricoh Aficio 2035e Bedienungsanleitung
Ricoh
Ricoh SH-P1 M020 Kurzanleitung
Ricoh
Ricoh AP610N - Aficio B/W Laser Printer Bedienungsanleitung
Ricoh
Ricoh PE-MF4 Series Installationsanleitung
Ricoh
Ricoh Pro C5200 Series Bedienungsanleitung
Ricoh
Ricoh Ri 100 Originalbetriebsanleitung
