Ricoh Supervisor-I Bedienungsanleitung
1
RICOH Supervisor-I
Installation Manual
ｄ
2
Table of Contents
1. What this document describes. ...................................................................................................... 3
2. Overview of installation ..................................................................................................................... 3
3. Installation Supervisor-I module (Data collector) on PC ................................................... 4
3.1 Data collector Installation procedure. ....................................................................................... 4
3.2 Supervisor-I user registration procedure ................................................................................. 8
3.2.1 Registration of email address............................................................................................... 8
3.2.2 User registration ...................................................................................................................... 10
Appendix ...................................................................................................................................................... 15
A.1 Data collector System Requirements. ..................................................................................... 15
A.2 FAQ ...................................................................................................................................................... 16
3
1. What this document describes.
The document explains how to set up RICOH Supervisor-I.
RICOH Supervisor-I offers graphical dashboard to keep track of the printer operating
status and alert function that prompts maintenance at the right time.
There are 2 ways to install RICOH Supervisor-I.
1) Using ColorGATE RIP software which is provided with a printer
2) Download RICOH Supervisor -I module (Data collector) from the following link.
https://contents-usstage.supervisori.ricoh.com/ins/datacollector.zip
*In the description, the words "Supervisor-I" and "Data collector" are used. “Data collector”
module must be installed on your PC in order to use Supervisor-I functions.
Supervisor-I helps to keep the printer running stably by grasping the PV and issuing alerts
at the right time.
we provide followings:
- Graphical dashboard that allows customers to see key usage statistics over
time on their printer in real time.
- Alert function to notify you of abnormal printer operation.
- Remote FW update function
These detailed functions are described in the operation manual of each model of RICOH
Supervisor-I.
2. Overview of installation
a. Firstly, check PC operating environment. Such as system requirement,
specification and Browsers. The system requirements are listed in Appendix
A.1. Please check it before installation.
b. Secondly, connect the printer and the PC on which “Data collector” is installed
to the same network that can connect to the Internet. Set IP address of the
printer as needed. For how to set the IP address of the printer, refer to the
manual of each printer.
c. Thirdly, install “Data collector” by referring to Chapter 4 in this manual.
d. Finally, register your email address and information about you so that you can
see the printer status.
4
3. Installation Supervisor-I module (Data collector) on PC
This part explains what customers prepare and how to set up Supervisor-I.
3.1 Data collector Installation procedure.
Data collector installer will start when adding a printer with ColorGATE RIP software.
Follow the steps below to install RICOH Supervisor-I.
When you use Ri 2000, please do not install AnaRIP on the same PC.
When the installer starts, check the following screen and click the “Next” button.
Read and accept the license agreement.
Installation will proceed automatically.
5
After installing, the following screen will be displayed.
Please check if the country where a printer is installed is correct.
If it is correct, please click “Next” and move on the next step.
If it is incorrect, please click “Change country” and set the correct country.
6
After setting the country, the following window will be displayed.
Please click “Finish” and finish the installation.
7
You will find the following icon when the installation was completed.
Data collector icon
8
3.2 Supervisor-I user registration procedure
After installing the Data collector, register your email address and user information
to use Supervisor-I functions. This section explains the procedure for the
registration.
3.2.1 Registration of email address
1) Start the Data collector and select “Basic setting”.
2) IP address of a printer is set automatically by linking with ColoGATE RIP.
In the case you dont use ColorGATE RIP, please set IP address.
3) At the bottom of the Basic setting screen, there is a “Email address” area
where you (a print shop) can set your e-mail address. Register your email address
to create an account on the Supervisor-I. After entering your email address, click
the “Save” button.
* Please note that email address cannot be changed after the registration
so check the email address is correct.
* This email address would receive alert notifications from RICOH Supervisor-I.
9
4) “Signed up” will pop up if the registration was successful.
10
3.2.2 User registration
1) When you register your e-mail address, an e-mail with the URL for user
registration will be sent to the registered e-mail address. The text of the email is
as follows.
*If you do not receive this email, please check your junk/spam email folder.
2) Click the URL and register the user information from the transitioned web
page. After entering the user information, click “Register” button to complete the
registration.
https://euprd.supervisori.ricoh.com/auth/register/account?t=uf33b3deb-ef6a-
4cab-a257-aaa07dcf135c
Inhaltsverzeichnis
Andere Ricoh Drucker Handbücher
Ricoh
Ricoh INFOPRINT COLOUR 1767 Bedienungsanleitung
Ricoh
Ricoh Pro 8100S Bedienungsanleitung
Ricoh
Ricoh SP204SF Bedienungsanleitung
Ricoh
Ricoh Aficio CL3000e DOT Bedienungsanleitung
Ricoh
Ricoh SP 210 Bedienungsanleitung
Ricoh
Ricoh Aficio CL4000DN Betriebsanleitung
Ricoh
Ricoh Aficio SP C242DN Montageanleitung
Ricoh
Ricoh GR-C4 Service-Handbuch
Ricoh
Ricoh MP CW2200SP Bedienungsanleitung
Ricoh
Ricoh G112 Bedienungsanleitung
Ricoh
Ricoh AP305 Bedienungsanleitung
Ricoh
Ricoh SP 220NW Bedienungsanleitung
Ricoh
Ricoh Aficio CL4000DN Bedienungsanleitung
Ricoh
Ricoh FT3320 Kurzanleitung
Ricoh
Ricoh Aficio SP C430DN Bedienungsanleitung
Ricoh
Ricoh LS3000 Bedienungsanleitung
Ricoh
Ricoh P C600 Bedienungsanleitung
Ricoh
Ricoh IM CW2200 Bedienungsanleitung
Ricoh
Ricoh StreamPunch Pro Administratorhandbuch
Ricoh
Ricoh C811DN - Aficio SP Color Laser Printer Bedienungsanleitung
