Ricoh SP C260DNw Bedienungsanleitung

Setup Guide

Setting Up the Machine

Installing the Software

Control Panel Sheet

1. Setting Up the Machine

50 15

89.6

DUE051

33 cm

(13 inches)

70 cm

(27.6 inches)

10 cm

(4.0 inches)

20 cm

(7.9 inches)

20 cm

(7.9 inches)

DAC502

120 - 127 V, 60 Hz, 11 A

220 - 240 V, 50/60 Hz, 6 A

Power Source

DUE053

DUE054

DUE055

DUE056

DUE057

DUE058

DUE059

DUE060

DUE061

DUE013 DUE014 DUE015

DUE062 DUE064 DUD080

DUE066 DUE021 DUE022

DUE023 DUE024

DUE067

DUE074

DUE068 DUE069

DUE070

DUE071

DUE072

DUE073

Install the software to use the machine.

Go to page 4 “2. Installing the Software”. For OS X, see User’s Guide in the

provided CD-ROM or our website.

2. Installing the Software

Check how the computer is connected

Specify how to connect to your computer according to the communication environment of your system.

connect using a

USB interface cable

connect using an

Ethernet interface cable

use a router (access point)?

Yes

connect by wireless? connect by wire?

connect via Wi-Fi Direct

See Wi-Fi Direct Guide in our website

use your computer for setup?

connect using Wi-Fi Setup Wizard

connect using a CD-ROM

DUE035

Go to page 5 "Connecting the Machine (USB/Network)".

Go to page 6 "Easy Setup

Using the CD-ROM".

Go to page 7 "Easy Setup Using

the Wi-Fi Setup Wizard".

•You can use both the CD-ROM and Wi-Fi Setup Wizard to configure the wireless settings for the machine.

•To connect using the WPS button, go to page 9 “Easy Setup Using the WPS Button”.

•To connect using a PIN code, go to page 10 “Easy Setup Using a PIN Code”.

•To set up manually, see User’s Guide in the provided CD-ROM or our website.

•When the Wi-Fi Direct function is enabled, a Wi-Fi Direct compliant device is recognized as a router (access point), and direct

communication among Wi-Fi Direct-compliant devices becomes possible.

When communicating using the Wi-Fi Direct function, you cannot connect to the Internet at the same time.

Use the machine from a smart device Android iOS

■How to use the machine from a

smart device

From a smart device application, you can use the

following function of the machine:

•Printing photographs and documents stored on

a smart device

After scanning the following QR code with your

smart device, search for the "RICOH Smart

Device Connector" application and download it

from the site that appears.

DUE075

■How to use the NFC tag

(Android smart devices only)

1. Configure the network connection of

the machine. For details, see page 6

"Connecting the Machine via Wi-Fi".

2. After scanning the following QR code with

your smart device, search for the "RICOH

Smart Device Connector" application and

download it from the site that appears.

3. Start "RICOH Smart Device Connector",

and write the machine's network

information on the NFC tag using the

application.

4. Perform printing by touching the NFC tag

from "RICOH Smart Device Connector".

Android iOS

Connecting the Machine (USB/Network)

DUE077 DUE078

●The following items are necessary to set up a wired

connection.

●USB interface cable or Ethernet interface cable

●CD-ROM supplied with the machine

●To install the software for network connection, quick

installation and manual installation can be used. Using

the manual installation, you can specify data to be

installed as you prefer.

1. Turn on your computer.

2. Insert the provided CD-ROM into the CD-ROM drive of the

computer.

If your computer does not have a CD-ROM drive, download a

setup file from our website.

3. Click [Quick Install].

4. The software license agreement appears in the [Software

License Agreement] dialog box. After reading the agreement,

click [Yes].

5. Select [USB Connection] or [Network Connection]

according to communication environment or your device.

6. Follow the instructions in the setup wizard.

7. Click [Finish] in the [Setup Complete] dialog box. If the

installer prompt you to restart Windows, reboot your

computer.

Setup is completed.

Windows

Connecting the Machine via Wi-Fi

DUE079

Easy Setup Using the CD-ROM

Using the CD-ROM supplied with this machine, you can install the

driver from your computer and configure the wireless LAN settings

for this machine.

●The following items are necessary to set up a wireless

connection.

●USB interface cable

Using the USB cable is needed to update the settings of

this machine when it is installed or the wireless LAN

settings change in your environment. See Step 6 to

connect your computer to this machine.

●Router (access point)

●CD-ROM supplied with the machine

●To install the software, quick installation and manual

installation can be used. Using the manual installation,

you can specify data to be installed as you prefer.

1. Turn on your computer.

2. Insert the provided CD-ROM into the CD-ROM drive of the

computer.

If your computer does not have a CD-ROM drive, download a

setup file from our website.

3. Click [Quick Install].

4. The software license agreement appears in the [Software

License Agreement] dialog box. After reading the

agreement, click [Yes].

5. Select [Wireless Connection].

6. Select [Manually configure the printer network] when

installing this machine.

Connect your computer and this machine by using the USB

cable.

Select [Automatically configure the printer network] when

configuring the wireless LAN settings for this machine is

completed.

7. Follow the instructions in the setup wizard.

8. Click [Finish] in the [Setup Complete] dialog box. If the

installer prompt you to restart Windows, reboot your

computer.

Setup is completed.

To connect using the Wi-Fi Setup Wizard, go to page 7

“Easy Setup Using the Wi-Fi Setup Wizard”.

To connect using the WPS button, go to page 9 “Easy

Setup Using the WPS Button”.

To connect using a PIN Code, go to page 10 “Easy

Setup Using a PIN Code”.

To connect using Wi-Fi Direct, see Wi-Fi Direct Guide in

our website.

Windows

Easy Setup Using the Wi-Fi Setup Wizard

From the control panel of this machine, you can also configure the

wireless LAN settings for the machine.

The following item is necessary to set up a wireless

connection.

●Router (access point)

Checking the SSID and Encryption key

The SSID and Encryption key for the router (access point) may be

printed on a label affixed to the router (access point). For details about

the SSID and Encryption key, refer to the router (access point) manual.

SSID

Encryption key

:XXXXXXXXXXXXX

DSG099

Confirm the SSID and Encryption key, and write them down on the

blank space as shown below.

SSID:

Encryption key:

Configuring Settings Using the Control Panel

●Before doing the following procedure, install the printer

driver according to the procedure on page 5

"Connecting the Machine (USB/Network)".

●Make sure the Ethernet cable is not connected to the

machine.

1. Check that the router (access point) is working correctly.

2. Press the [Menu] key.

DUE129

3. Press the [ ] or [ ] key to select [Host Interface], and then

press the [OK] key.

4. Press the [ ] or [ ] key to select [Network Setting], and

then press the [OK] key.

5. Press the [ ] or [ ] key to select [Wi-Fi Config.], and then

press the [OK] key.

6. Press the [ ] or [ ] key to select [Wi-Fi], and then press

the [OK] key.

7. Press the [ ] or [ ] key to select [Active], and then press

the [OK] key.

8. Press the [Menu] key to return to the Initial screen.

9. Turn off the machine, and then turn it back on.

10. Press the [Menu] key.

DUE129

11. Press the [ ] or [ ] key to select [Host Interface], and then

press the [OK] key.

12. Press the [ ] or [ ] key to select [Network Setting], and

then press the [OK] key.

13. Press the [ ] or [ ] key to select [Wi-Fi Config.], and then

press the [OK] key.

14. Press the [ ] or [ ] key to select [Setup Wizard], and then

press the [OK] key.

15. Press the [ ] or [ ] key to select SSID of the router (access

point) from the searched SSID list, and then press the [OK]

key.

16. Press the [ ] or [ ] key to select the authentication

method, and then press the [OK] key.

The next steps differ depending on the authentication method

that you have selected. Proceed to Step 17 of the appropriate

section.

•If the authentication method is set to [WPA2-PSK] or [Mixed Mode]

•If the authentication method is set to [Open System] or [Shared Key]

Connecting to devices using the WPA2-PSK or

Mix Mode WPA2/WPA authentication

17. Enter the encryption key using the [ ] or [ ] key, and then

press the [OK] key.

As the passphrase, you can enter either 8 to 63 ASCII

characters (0x20-0x7e) or 64 hexadecimal digits (0-9, A-F, a-f).

•To go to the next characters, press the [OK] key.

•Press the [Escape] key to clear all characters.

For details about checking the encryption key, see "Checking the

SSID and Encryption key".

18. Press the [OK] key.

After connecting to the network, the Wi-Fi screen is displayed.

19. Press the [ ] or [ ] key to select [Wi-Fi Status], and then

press the [OK] key.

When "Connected" is displayed, the connection has been

established.

•When "Connecting" is displayed, the connection is being established.

•When "Disconnected" is displayed, the connection has not been

established. Start again from the beginning.

Connecting to the devices using the Open

System or Shared Key authentication

17. Press the [ ] or [ ] key to select the encryption method,

and then press the [OK] key.

The maximum number of characters that can be entered in the

encryption key field depends on the encryption method settings.

Do not select [None] except in special cirmunstances. If

selected, the security system will not work.

18. Enter the encryption key using the [ ] or [ ] key, and then

press the [OK] key.

•To go to the next characters, press the [OK] key.

•Press the [Back] key to clear all characters.

For details about checking the encryption key, see "Checking the

SSID and Encryption key".

19. Enter the ID using the [ ] or [ ] key, and then press the

[OK] key.

The ID is used for identifying the encryption key. You can

20. Press the [OK] key.

After connecting to the network, the Wi-Fi screen is displayed.

21. Press the [ ] or [ ] key to select [Wi-Fi Status], and then

press the [OK] key..

When "Connected" is displayed, the connection has been

established.

•When "Connecting" is displayed, the connection is being established.

•When "Disconnected" is displayed, the connection has not been

established. Start again from the beginning.

Andere Handbücher für SP C260DNw

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ricoh Drucker Handbücher

Ricoh

Ricoh AP410 Betriebsanleitung

Ricoh

Ricoh AP410 Bedienungsanleitung

Ricoh

Ricoh Aficio AP610 Betriebsanleitung

Ricoh

Ricoh Ri 2000 Gebrauchs- und Pflegehandbuch

Ricoh

Ricoh Pro L5130e Service-Handbuch

Ricoh

Ricoh Aficio SP 3500N Bedienungsanleitung

Ricoh

Ricoh Aficio CL3000 Handbuch

Ricoh

Ricoh SP 8400DN Bedienungsanleitung

Ricoh

Ricoh 402850 Bedienungsanleitung

Ricoh

Ricoh Pro 1107 Bedienungsanleitung

Ricoh

Ricoh TC-II Bedienungsanleitung

Ricoh

Ricoh Aficio SP C811DN Series Montageanleitung

Ricoh

Ricoh Pro 1106EX Bedienungsanleitung

Ricoh

Ricoh 402434 Bedienungsanleitung

Ricoh

Ricoh Pro C9200 Bedienungsanleitung

Ricoh

Ricoh Aficio 1035 Series Bedienungsanleitung

Ricoh

Ricoh Ri 100 Originalbetriebsanleitung

Ricoh

Ricoh Aficio Color 3006 Bedienungsanleitung

Ricoh

Ricoh AficioSP C410DN Bedienungsanleitung

Ricoh

Ricoh B234 Bedienungsanleitung

Ricoh

Ricoh BRG-P1w Kurzanleitung

Ricoh

Ricoh Aficio SP C840DN Bedienungsanleitung

Ricoh

Ricoh Aficio GX3000N Bedienungsanleitung

Ricoh

Ricoh M116 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung