RIGGING INNOVATIONS Telesis 3.0 Bedienungsanleitung

RIGGING INNOVATIONS, INC.

Telesis 3.0

OWNER'S MANUAL

AND PACKING INSTRUCTIONS

PN 1313-( )

$20.00 (Digital)

$30.00 (Printed)

TABLE OF CONTENTS

WARNING .....................................................................................................................

DISCLAIMER ................................................................................................................

SERIAL NUMBER AND DATE OF MANUFACTURE RECORD ............................

Section 1 - General Information ..................................................................

1.1 TELESIS 3.0 TSO

1.2 Certification Rigger Qualifications

Jump This Equipment?”1.3 “Am I Qualified to

1.4 Customer Service

.5 Table I - Parts List1

Section 2 - Canopy Compatibility ...............................................................

2.1 Canopy Compatibility

Compatibility2.2 Reserve

2.3 Volume

2.4 Deployment Type

2.5 Orange Warning Label Placard Data

.6 Industry Speed and Weight Limitations2

Section 3 - User Information .......................................................................

3.1 Main C and Packing Instructionsanopy Assembly

TOP pilot chute. ilot chute357L Spring type p

3.2 3-Ring Release Assembly

tic Line Lanyard System3.3 Reserve Sta

3.4 FXC Main

3.5 Harness Adjustments and Fitting

3.6 Main Static Line (MSL) installation.

OC installation.3.7 AFF MOD and AFF/B

3.8 Reserve SOS system.

3.9 Maintenance Procedures

.10 Rig Cleaning - Table III - Cordura® - recommended Stain Removal Methods3

Section 4 - Rigger Information ....................................................................

4.1 Orange Warning Label Placard Data

4.2 Parachute Assembly Inspection Form

4.3 sRam-Air Reserve Packing Instruction

stem4.3.1 Assembling Reserve Sy

4.3.2 Closing Loop Lengths lation4.3.3 Cypres AAD Reserve Instal

4.3.4 Folding Reserve Parachute

WARNING!

1. Training and/or experience are required to lower the risk of

serious bodily injury or death.

NEVER use this equipment unless you have:

A. Read the warning label and completed a “controlled

program of

assembly. instruction” in the use of this parachute

- OR-

B. Read the warning label and all appropriate owners /

flight manuals, packing instructions a

at least 100 ram-air parachute jumps. nd completed

2. Lower the risk of death, serious injury, canopy damage

and hard openings by never exceeding the limits shown

on the warning label.

Warning labels may be found in the following

locations:

Ram-Air parachute- center cell top skin at trailing edge.

Harness/Container System- backpad.

WARNING – BODY FLYING ATTITUDES (FREEFLYERS)

Some body positions (i.e. head down, stand up, and long dives) may enable the

user to reach speeds and attitudes, beyond those for which your equipment has

been designed and tested.

Premature or unintentional deployments in these body positions, even

if you are below the maximum placarded deployment speed, are

extremely dangerous.

Parachute systems are designed to operate within specific weight and speed

parameters, while oriented in a body position ranging from “belly to earth” to a

slightly “head high” attitude.

Deployments outside of these parameters could cause one or all of the following:

•Extremely hard openings resulting in equipment failure

•Severe bodily injury

•Possible harness failure or ejection from the harness

•Canopy damage, malfunction or death!

DISCLAIMER - NO WARRANTY

Because of the unavoidable danger associated with the use of the TELESIS 3.0 parachute system, the

manufacturer makes NO WARRANTY, either expressed or implied. The system is sold with all faults and

without any warranty of fitness for any purpose. Manufacturer also disclaims any liability in tort of

damages, direct or consequential, including personal injuries resulting from a defect in design, material or

workmanship or manufacturing whether caused by negligence on the part of the manufacturer or otherwise.

By using this system, or allowing it to be used by others, the buyer WAIVES any liability of or the

anufacturer for personal injuries or other damages arising from such use.m

If the buyer declines to waive liability on the part of the manufacturer, buyer may obtain a full refund of the

purchase price by returning the system, before it is used,to the manufacturer within 15 days of the date

f the original purchase with a letter stating why it was returned.o

!!! WARNING !!!

You can substantially reduce risk by ensuring that each component of the system has been assembled and

packed in strict compliance with the manufacturer's instructions, by obtaining proper instruction in the use of

this system, and by operating each component of the system in strict compliance with owner's manual.

However, parachute systems sometimes fail to operate properly even when properly assembled, packed and

perated so that you risk serious injury or death each time you use the system.o

DANGER Each time you use this parachute

system you risk serious bodily

injury or death.

DANGER

TELESIS 3.0 P/N 6113 - (3) S/N _______________________________

DATE OF MANUFACTURE: _____________________________

REVISION DATE: June 10, 2008

Manufactured by:

Rigging Innovations, Inc.

Rd. Bldg. 14900 N. Tumbleweed

Eloy AZ 85231, USA

Telephone: (520) 466.2655

Telefax: (520) 466.2656

e-mail: [email protected]

This manual designed and produced by

RIGGING INNOVATIONS INC.

Reproduction in whole or in part without permission is prohibited.

Section 1.0

General

Information

.1 T1 ELESIS 3.0 CERTIFICATION

The TELESIS 3.0 harness and container system is approved as a minor design change under the original

Talon TSO and approved under FAA TSO-C23c, Category B: limited to use by persons up to 116 kg (254

lb.) fully equipped, and up to 150 knots.

NORTHWEST MOUNTAIN REGION

TRANSPORT AIRPLANE DIRECTORATE

AIRCRAFT CERTIFICATION SERVICE

LOS ANGELES AI ATION OFFICERCRAFT CERTIFIC

3229 E SPRING ST.

LONG BEACH, CA 90806-2425

AUG. 7, 1989

Rigging Innovations Inc.

PresidentMr. Sandy R. Reid,

236-A E. Third St.

erris, CA 92370P

Gentlemen: Rigging In sembly,novations Inc., Telesis Dual Parachute Harness & Container As

Part Number 6113-( ); Series; Technical Standard Order C23c

Your application of June 14, 1989, requesting the issuance of a Technical Standard Order (TSO) authorization in

accordance with the procedural requirements of Federal Aviation Regulation (FAR) Part 21, Subpart O, has been reviewed.

Based upon your data and statement of conformance certifying your article has met the requirements of FAR Part 21,

Subpart O, and the minimum performance standards of TSO-C23c (Ref. FAR 21.305(b)) authorization is hereby granted.

The following technical data are considered to fulfill the requirements for TSO authorization and are being retained in our

files:

1. Qualification Test Report SAE8015A - Test Summary Per AS8015A

2. Marking Requirements dated May, 1989

3. Owners Manual P/N 6113-( ) dated May, 1989

The quality control procedures contained in your quality control manual currently on file at the Manufacturing Inspection

District Office and your statement that those procedures will be applied to the manufacture of subject articles at the above

address, are considered adequate in accordance with FAR 21.143.

Effective this date you are authorized to use TSO procedures is extended to include the subject Telesis Dual Parachute

Harness and Container Assembly and you may identify this article with the applicable TSO markings as required by TSO-

C23c.

In accordance with the provisions of FAR 21.3, you are required to report to the FAA any failure, malfunction, of defect

related to your TSO authorization. As required by 21.613(b), you must also notify the FAA when you no longer manufacture

a TSO approved article.

This authorization pertains only to manufacturing operations at the above address and this office must be notified in

advance of any proposed relocation to preclude interruption while awaiting quality control approval of your new facility.

1.2 RIGGER QUALIFICATIONS

To pack and maintain this parachute system, the FAA Senior or Master Rigger or foreign equivalent -

must possess a BACK rating endorsement to his or her certificate.

Since these systems are certified only with square reserve parachutes the rigger must be trained to

pack ram-air parachutes prior to certifying the TELESIS 3.0 system for emergency use.

14 CFR Part 65.127( ) No certificated parachute rigger may –

(e) Pack, maintain, or alter a parachute in any manner that deviates from the

procedures approved by the administrator OR the manufacturer of the parachute;

(f) Exercise the privileges of his certificate and type rating unless he understands the

current manufacturer's instructions for the operation involved.

ANYONE who circumvents Rigging Innovations, Inc. instructions is in violation of

14 CFR Part 65.127 and is, therefore, performing an illegal procedure.

1313-(3) 2008 Version 1.2

1.3 "Am I Qualified to Use this Equipment?"

As the new owner of a Rigging Innovations, Inc. TELESIS 3.0 parachute system, before you use it,

it is very important that you can answer yes to several questions. Only by doing so can you be assured

that you have the necessary training and/or experience to safely utilize modern parachute equipment of

this type.

Question 1: Does my experience level and /or training qualify me for using this equipment?

Advanced equipment such as the TELESIS 3.0 may have features requiring a certain

level of experience and training in order to be used safely.

Question 2: Have I been briefed or trained in the operation of this equipment by qualified

personnel such as an instructor or licensed rigger?

If you have progressed to the level where you are qualified to jump advanced

equipment, or if you have been trained on other types, there may be certain features of

this system that you are unfamiliar with. Make sure that you have received a thorough

briefing from a certified instructor or rigger for the type of equipment you are about to

jump.

Question 3: Does the equipment fit properly?

Can you see and / or reach the main deployment handle(s), 3-ring release handle,

reserve ripcord and RSL? This equipment is built in a variety of container sizes,

lengths, and widths, and may have a custom pre-sized harness. These configurations

along with options such as BOC main deployment, make compatible sizing to the

individual extremely important to the safe operation of the system. If the system does

not fit properly, the handles may be inaccessible or may move during the jump thereby

causing problems in the air.

The above questions have dealt with your ability to safely jump this RIGGING INNOVATIONS

product only. If you have answered "Yes" to all the questions, you should feel comfortable using R.I.

equipment. However, there are additional factors that may influence your decision and ability that do

not relate to R.I. products. If you have any questions or feel uneasy about using this harness and

container system, do not hesitate to ask a qualified Parachute Instructor, FAA certified parachute rigger

for any further information or training you feel necessary.

Or contact Rigging Innovations at:

Telephone: (520)-466-2655 or

[email protected]

1313-(3) 2008 Version 1.2

Inhaltsverzeichnis

Andere RIGGING INNOVATIONS Zubehör Handbücher

RIGGING INNOVATIONS

RIGGING INNOVATIONS Talon FS and Betriebsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung