Rigol DM3058 Bedienungsanleitung

User’s Guide RIGOL

Publication number: UGC03113-1112

Nov. 2008

DM3058 Digital Multimeter

RIGOL

User’s Guide for DM3058

2．RIGOL products are protected by patent law in and outside of P.R. China.

3．Information in this publication replaces all previously corresponding material.

4．RIGOL Technologies, Inc. reserves the right to modify or change part of or all

the specifications and pricing policies at company’s sole decision.

NOTE: RIGOL is registered trademark of RIGOL Technologies, Inc

RIGOL

User’s Guide for DM3058

Safety Notices

Review the following safety precautions carefully before operating the instrument

to avoid any personal injuries or damages to the instrument and any products

connected to it. To avoid potential hazards use the instrument as specified by this

user’s guide only.

The instrument should be serviced by qualified personnel only.

Avoid Fire or Personal Injury.

Use Proper Power Cord.

Only the power cord designed for the instrument as authorized in your country

could be used.

Ground The Instrument.

The instrument is grounded through the grounding conductor of the power cord. To

avoid electric shock the instrument grounding conductor(s) must be grounded

properly before making connections to the input or output terminals of the

instrument.

Observe All Terminal Ratings.

To avoid fire or shock hazard, observe all ratings and marks on the instrument.

Follow the user’s guide for further ratings information before making connections to

the instrument.

Do Not Operate Without Covers.

Do not operate the instrument with covers or panels removed.

Use Proper Fuse.

Please use the fuse that its voltage and current ratings as specified for the

instrument.

Avoid Circuit or Wire Exposure.

Do not touch exposed connections and components when power is on.

Do Not Operate With Suspected Failures.

If suspected damage occurs with the instrument, have it inspected by qualified

service personnel before further operations.

Keep Well Ventilated.

Do Not Operate in Wet/Damp Conditions.

RIGOL

User’s Guide for DM3058

III

Do Not Operate in an Explosive atmosphere.

Keep Product Surfaces Clean and Dry.

The disturbance test of all the models meet the P/F values of A in the

standard of EN 61326: 1997+A1+A2+A3, but can’t meet the P/F values

of B.

RIGOL

User’s Guide for DM3058

Input Terminal Protection Limitation

Protection limitation is defined for the input terminal:

1．Main input (HI and LO) terminal

HI and LO terminals are used for Voltage, Resistance, Capacitance, Continuity,

Frequency and Diodes measurement. Two protection limitations are defined:

1) HI-LO protection limitation: 1000 VDC or 750 VAC. It is the maximum

measurable voltage. The limitation can be expressed as 1000 Vpk.

2) LO-ground protection limitation. LO terminal can safely “float” 500 Vpk

relative to the ground.

The maximum protection limitation of HI terminal relative to the ground is

1000 Vpk. Therefore, the sum of the “float” voltage and the measured voltage

cannot exceed 1000 Vpk.

2．Sampling (HI Sense and LO Sense) terminal

HI Sense and LO Sense are used for 4-Wire Resistance Measurement. Two

protection limitations are defined:

1) HI Sense-LO Sense protection limitation: 200Vpk.

2) LO Sense-LO protection limitation: 2Vpk.

3．Current input (I) terminal

Iand LO terminal are used for current measurement. The maximum current

which go through the Iterminal is limited to 10A by the fuse on the rear

panel.

NOTE: Voltage on the current input terminal corresponds to voltage on LO

terminal. To obtain favorable protection, specified fuse should be used.

IEC Measurement Category II Overvoltage Protection

To protect against the danger of electric shock, DM3058 provides overvoltage

protection for line-voltage mains connections meeting both of the following

conditions:

1．The HI and LO input terminals are connected to the mains under

Measurement Category II conditions, defined below.

2．The mains are limited to a maximum line voltage of 600 VAC.

WARNING: IEC Measurement Category II includes electrical devices connected to

mains at an outlet on a branch circuit. Such devices include most small appliances,

test equipment, and other devices that plug into a branch outlet or socket.

DM3058 may be used to make measurements with the HI and LO inputs connected

RIGOL

User’s Guide for DM3058

to mains in such devices (up to 600 VAC), or to the branch outlet itself. However,

DM3058 may not be used with its HI and LO inputs connected to mains in

permanently installed electrical devices such as the main circuit-breaker panel,

sub-panel disconnected boxes, or permanently wired motors. Such devices and

circuits are subject to overvoltage that may exceed the protection limits of DM3058.

NOTE：Voltages above 600 VAC may be measured only in circuits that are isolated

from mains. However, transient overvoltage is also present on circuits that are

isolated from mains. DM3058 is designed to safely withstand occasional transient

overvoltage up to 4000Vpk. Do not use this equipment to measure circuits where

transient overvoltage could exceed this level.

RIGOL

User’s Guide for DM3058

Safety Terms and Symbols

Terms in this Guide. These terms may appear in this manual:

WARNING: Warning statements indicate the conditions or practices that

could result in injury or loss of life.

CAUTION: Caution statements indicate the conditions or practices that

could result in damage to this product or other property.

CAT I (1000V) IEC Measurement Category II. The maximum voltage can

be measured by HI-LO terminal is 1000Vpk.

CAT II (600V): IEC Measurement Category II. Inputs may be connected

to mains (up to 600 VAC) under Category II over voltage

conditions.

Terms on the Product. These terms may appear in this manual:

DANGER indicates an injury or hazard that may immediately happen.

CAUTION indicates that a potential damage to the instrument or other property

might occur.

Terms on the Product. These terms may appear in this manual:

Protective

Earth

Terminal

Hazardous

Voltage

Refer to

Instructions

Test

Ground

Chassis

Ground

RIGOL

User’s Guide for DM3058

VII

DM3058 Digital Multimeter Overview

RIGOL DM3058 is an instrument especially designed for high-precision,

multifunction, and automation measurements. It realized a combination of basic

measurement function and multifold math functions as well as Random Sensor

measurement function.

The DM3058 holds a high-resolution monochrome LCD display system with clear

keyboard layout and operation hints to make it easier and agility to use. Besides, it

can support multi-interface such as RS-232, USB, LAN and GPIB also for U-disk.

Meanwhile, you can also operate it at will via Virtual Terminal Display and Control

as well as Remote Network Access.

From the performance and characteristics given below, you will understand how a

DM3058 satisfy your measurement requirements.

Rear 5 ½ digits resolution.

Measurement speed: 2.5, 20 and 120 reading/s.

Double Display function enables to display two types of characteristic for one

signal synchronously.

Preset and Ordinary dual mode directly switch. Preset mode enable to stored

configuration quickly.

Three types of way for setting Power Supply: Power on, Default, Switch.

Measuring Speed: 2.5reading/s, 20reading/s and 120reading/s.

DC Voltage Range between 200mV and 1000V.

DC Current Range between 200uA and 10A.

True-RMS, AC Voltage Range between 200mV and 750V.

True-RMS, AC Voltage Current between20mA and 10A.

Resistance Range between 200Ωand 100MΩ, 2, 4 Wire Resistance

Measurement.

Capacitance Range between 2nF and 10000uF.

Frequency Range between 20Hz and 1MHz.

Continuity and Diode Test.

Random Sensor Measurement function，Built-in Thermocouple compensate in

Cold Terminal.

Abundant Math operations ：Max, Min, Average, P/F, dBm, dB, Relative

Measurement, Standard Deviation and Vertical chart.

RIGOL

User’s Guide for DM3058

VIII

Support USB, GPIB, RS-232 and LAN remote control as well as USB-TMC 488.2

Basic, LXI-C Criterion and SCPI Language.

In possession of compatible Commands with both Agilent 34401A and Fluke

45.

Three kinds of management for Power Supply include PwrOn, Default and

Power.

Built-in 10 groups of Save Configuration could be easily Save or Recall and

Config by Remote Control System.

Configuration clone for backup all the configuration within instrument into

other DM3058 via U-disc or Clone.

Chinese and English Menu and Help System Online.

Provides with Control Software on PC and Edit Software for Random Sensor

Andere Handbücher für DM3058

Inhaltsverzeichnis

Andere Rigol Messgerät Handbücher

Rigol

Rigol M300 Series Bedienungsanleitung

Rigol

Rigol RSA5065 Bedienungsanleitung

Rigol

Rigol DSA1000 Series Betriebsanleitung

Rigol

Rigol RP1003C Bedienungsanleitung

Rigol

Rigol DS6000 Series Montage- und Bedienungsanleitung

Rigol

Rigol VB1080 Bedienungsanleitung

Rigol

Rigol RP1002C Bedienungsanleitung

Rigol

Rigol DSA700 series Bedienungsanleitung

Rigol

Rigol DS1000CA series Bedienungsanleitung

Rigol

Rigol DSA700 series Bedienungsanleitung

Rigol

Rigol RSA3030 Bedienungsanleitung

Rigol

Rigol PLA2216 Bedienungsanleitung

Rigol

Rigol DS1000U Series Bedienungsanleitung

Rigol

Rigol DSA1030A series Bedienungsanleitung

Rigol

Rigol RP1000D Series Bedienungsanleitung

Rigol

Rigol RSA5000-VNA Bedienungsanleitung

Rigol

Rigol PHA0150 Bedienungsanleitung

Rigol

Rigol MSO8000 Series Bedienungsanleitung

Rigol

Rigol DL3021 Bedienungsanleitung

Rigol

Rigol DSA1000 Series Installations- und Betriebshandbuch

Rigol

Rigol DSA1000 Series Bedienungsanleitung

Rigol

Rigol RSA Series Betriebsanleitung

Rigol

Rigol RSA5065 Bedienungsanleitung

Rigol

Rigol DSA815 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung