Rimage Amigo II Bedienungsanleitung

Rimage Amigo IITM

User Guide

Corporate Headquarters:

Rimage Corporation

7725 Washington Avenue South

Minneapolis, MN 55439

USA

800 553 8312 (toll free US)

Service: +1 952 946 0004 (International)

Fax: +1 952 944 6956

European Headquarters:

Rimage Europe GmbH

Albert-Einstein-Str. 26

63128 Dietzenbach Germany

Tel: +49-(0) 6074-8521-0

Fax: +49-(0) 6074-8521-21

CD and DVD Recording Software

Disclaimer

This Product, Software, or Documentation may be

designed to assist you in reproducing material in

which you own the copyright or have obtained

permission to copy from the copyright owner.

Unless you own the copyright or have permission

to copy from the copyright owner, you may be

violating copyright law and be subject to payment

of damages and other remedies. If you are

uncertain about your rights, you should contact

your legal advisor. If you are neither in possession

of the copyright nor have authorization from the

owner of the copyright, unauthorized copying of

CDs or DVDs violates national and international

legislation and can result in severe penalties.

Rimage Corporation reserves the right to make

improvements to the equipment and software described in

this document at any time without any prior notice. Rimage

Corporation reserves the right to revise this publication and

to make changes from time to time in the content hereof

without obligation of Rimage Corporation to notify any

person or organization of such revisions or changes.

This document may contain links to web sites that were

current at the time of publication, but may have moved or

become inactive since. This document may contain links to

sites on the Internet that are owned and operated by third

parties. Rimage Corporation is not responsible for the

content of any such third-party site.

Rimage™ is a trademark of the Rimage Corporation.

Amigo II™ is a trademark of the Rimage Corporation. Dell®

is registered trademark of Dell Computer Corporation.

FireWire®is a registered trademark of Apple Computer,

Inc.

All other trademarks and registered trademarks are the

property of their respective owners.

110654-000_G

Rimage Amigo I

Support information

US, Asia/Pacific, Mexico/Latin America Europe

Rimage Corporation

7725 Washington Avenue South

Minneapolis, MN 55439

USA

Attn: Rimage Services

Service:

Email: http://www.rimage.com/support_form.cfm

North America: 800-553-8312

Asia/Pacific, Mexico/ Latin America: 952-946-0004

FAX: 952-946-6956

Rimage Support Website:

http://www.rimage.com/support.html select the appropriate

Product Family and then select your product. If you cannot

find a solution on our website, email Rimage Services at

support@rimage.com.

Rimage Europe GmbH

Albert-Einstein-Str. 26

63128 Dietzenbach Germany

Tel: +49-(0) 6074-8521-0

FAX: +49-(0) 6074-8521-21

Rimage Europe Technical Website:

http://www.rimage.com/support.html

Select the appropriate Support link to

learn more. If you cannot find a solution

on our website, email Rimage Services,

Europe at .

[email protected]

When you contact Rimage Services, please provide:

•Unit serial number and software version.

•Functional and technical description of the problem.

•Exact error message received.

Contents

Introduction.........................................................................................................1

Requirements............................................................................................................................ 1

Software requirements...................................................................................................................... 1

Operating System requirements....................................................................................................... 1

Media requirements.......................................................................................................................... 1

Ribbon requirements ........................................................................................................................ 1

Label design requirements ............................................................................................................... 1

Networking ability...................................................................................................................... 1

Identify the parts of the Amigo II.......................................................................2

Front view......................................................................................................................................... 2

Rear view.......................................................................................................................................... 3

Operate the Amigo II...........................................................................................4

Powering on the Amigo II.................................................................................................................. 4

Pausing the system .......................................................................................................................... 4

Loading and unloading discs ............................................................................................................ 4

Setting up your printing preferences................................................................................................. 4

Maintain the Amigo II..........................................................................................5

Maintenance schedule...................................................................................................................... 5

Learn more ..........................................................................................................9

Amigo II Specifications ..................................................................................................................... 9

Technical support and product updates...........................................................................................10

Safety information............................................................................................................................10

Compliance testing..........................................................................................................................11

110654_G i

Introduction

This manual provides the information needed to operate the Amigo II and identify the parts. To set up and

install your Amigo II, refer to the Amigo II Setup and Installation Guide.

The Amigo II is available with either the Everest Printer or the PrismPlus Printer.

Amigo II with Everest Printer Amigo II with PrismPlus Printer

Requirements

Software requirements

The Amigo II will operate only with the Rimage Producer Software.

Operating System requirements

The Amigo II runs on Windows 2000 SP4, Windows XP SP1 or SP2, and Windows 2003.

Media requirements

Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct media

requirements.

Ribbon requirements

Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct printer ribbons.

Label design requirements

Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct label design

requirements.

Networking ability

To submit orders from a networked PC, refer to the Rimage Advanced Setup Guide.

110654_G 1

Rimage Amigo I

2 110654_G

Identify the parts of the Amigo II

Front view

Printe

Lift Arm

Control Panel Doo

Recorder

Disc Dis

enser

erator Panel

Carousel

Operator Panel

There are four LEDs and an operator button on the operator panel. The operator panel is located inside the

Amigo II door.

Carousel Present LED

Active LED

erator Button

Power LED

Fault LED

Operator Button

Each time you press the operator button, the carousel rotates to the next bin.

Tip: The carousel will rotate to a bin only after the Amigo II has completed initializing.

Identify the parts of the Amigo II

Status LEDs

The following status LEDs provide Amigo II operational information.

Image Name Functionality

Carousel

Present The yellow Carousel Present LED illuminates when the carousel is absent.

Active The yellow Active LED illuminates when there is traffic through the control

port. It flashes with the carousel present LED to indicate a paused state.

Power The green Power LED illuminates when the Amigo II is powered on.

Fault If an error is detected, the yellow Fault LED, located on the operator button,

illuminates during the button diagnostics.

Rear view

Printe

Printer

Cable

USB Cable

Printer

Cable

USB Cable Power Cord

Power

Switch Power

Switch

FireWire Cable

USB Cable

USB Cable FireWire Cable

With the PrismPlus Printer With the Everest Printer

110654_G 3

Rimage Amigo I

4 110654_G

Operate the Amigo II

This section provides information that you need to produce CDs or DVDs with the Amigo II.

Powering on the Amigo II

1. To power on the Amigo II, press the power

switch on the rear of the Amigo II. The

Amigo II initializes.

2. To power off the Amigo II, press the power

switch again.

Power

Switch

Pausing the system

1. To pause the Amigo II, open the door.

2. To resume operation, close the door.

Loading and unloading discs

You can load up to 100 discs in a bin. You can either remove the carousel to load discs or open the access

door to place discs in each bin.

1. Load the discs.

a. Open the door.

b. To rotate the carousel and place a bin in position to

load discs, press the operator button.

c. Place discs to be recorded in the input bin (Bin 1) of

the carousel.

-Important! Place the disc with the recording side facing

ns,

depending on how the software is configured.

down.

Note: Remove any completed discs from each bin.

Tip: Bins 2 & 3 may be either input or output bi

d. Repeat steps b - c until the required bins are filled.

e. Close the door.

2. Unload the discs.

a. Open the door.

b. To rotate the carousel and place a bin in position to remove discs, press the operator button.

c. Remove the discs from the bin.

d. Repeat steps b - c until the required bins are empty.

e. Close the door.

Setting up your printing preferences

Printing Preferences allows you to set up and run your Amigo II to produce the best possible label on your

discs. Please refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for specific printing

preferences instructions.

Maintain the Amigo II

Maintenance schedule

Task Frequency

Once a week. Remove dust from Amigo II and surrounding work

area using a lint-free cloth.

Clean the Amigo II

Upon installation and again if the discs are not picked correctly from

the printer tray. Refer to the procedures below for more information.

Align the printer

Note: For information on cleaning and maintaining your printer, refer to your Everest Printer User Guide

or PrismPlus! Printer User Guide.

Everest Printer

To align your Everest Printer, refer to the following instructions.

Required tools:

yT 25 Torx screwdriver

y5/32” Allen wrench

1. To power on the Amigo II, press the Amigo II power switch.

2. Wait until the unit completes the initialization.

Tip: The Everest II Printer takes 1 to 2 minutes to complete the initialization.

3. Prepare the unit for alignment.

a. Manually move the lift arm to the top of the

Amigo II.

b. To place a disc in the lift arm, press the

disc up into the Lift Arm while pressing the

disc release button.

c. To open the print drawer, press the printer

button.

d. Close and re-open the door of the Amigo II.

This releases the lift arm so you can

manually move it.

Lift

Arm

Gri

Disc Release Button

110654_G 5

Rimage Amigo I

6 110654_G

4. Align the printer.

a. Slowly move the lift arm down until the disc just touches the print pad.

Printer

Button

Lift

Arm

Side to Side

Alignment

Pad

Holding

Pins

b. If the disc is not centered side to side on the print pad, align the printer side to side.

i. Loosen the side to side screws.

ii. Slide the printer, not the print drawer,

until the side edges of the disc and

printer pad are aligned.

iii. Tighten the side to side screws.

Side to Side

Screws

Front to Back Screw

c. Using either the T25 Torx driver or the

5/32” Allen wrench, turn the front to back

alignment screw until there is a 1/16”

(1.5mm) gap between the front edge of the

disc and the raised edge of the disc

retainer.

Disc

Retaine

5. Raise the lift arm out of the way of the print drawer.

6. To close the print drawer, press the printer button.

7. To release the disc from the gripper, press the disc release button.

Tip: Place your hand under the disc to catch it.

Andere Handbücher für Amigo II

Inhaltsverzeichnis

Andere Rimage Drucker Handbücher

Rimage

Rimage Everest 600 Bedienungsanleitung

Rimage

Rimage Autostar II Bedienungsanleitung

Rimage

Rimage Everest Bedienungsanleitung

Rimage

Rimage Amigo II Handbuch

Rimage

Rimage 5400N Disc Copy Station Bedienungsanleitung

Rimage

Rimage Autostar II Bedienungsanleitung

Rimage

Rimage AutoPrism Bedienungsanleitung

Rimage

Rimage Desktop 360i Bedienungsanleitung

Rimage

Rimage Everest III Bedienungsanleitung

Rimage

Rimage Professional 5400N Bedienungsanleitung

Rimage

Rimage Allegro 100 Bedienungsanleitung

Rimage

Rimage AutoEverest AutoPrinter Bedienungs- und Sicherheitshinweise

Rimage

Rimage Desktop 360i Bedienungsanleitung

Rimage

Rimage Producer IIIN+ 8100N Bedienungsanleitung

Rimage

Rimage 480i Bedienungsanleitung

Rimage

Rimage Desktop 360i Handbuch

Rimage

Rimage Autostar II Bedienungs- und Sicherheitshinweise

Rimage

Rimage 480i Bedienungs- und Sicherheitshinweise

Rimage

Rimage Desktop 360i Gebrauchs- und Pflegehandbuch

Rimage

Rimage AutoEverest AutoPrinter Bedienungsanleitung

Rimage

Rimage Everest Encore Bedienungs- und Sicherheitshinweise

Rimage

Rimage Everest III Bedienungsanleitung

Rimage

Rimage Prism Bedienungsanleitung

Rimage

Rimage Everest II Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung