ring BHAJB001 Bedienungsanleitung
Installing and
Setting Up
Ring Video
Doorbell Elite
Welcome
Congratulations on your new Ring Video
Doorbell Elite.
Ring Doorbell is the foundation of the Ring of
Security around your home.
We hope your Ring Doorbell brings you an
increased sense of security and convenience,
as well as the joy that comes from being
able to connect with visitors when you’re not
home.
Hi,
I’m Rochelle, a Ring Community Support Agent in
Arizona. I’ve set up so many Ring Doorbells, I can
probably do it in my sleep!
We’ve included all the tools you need, so setting it up by
yourself should be a breeze. If you run into any problems,
my colleagues and I can help. Just give us a call.
Don’t feel like calling? Check out our online Help
Center at ring.com/help.
32
Elite Power Kit
Includes power adapter and plugs for
dierent types of outlets
3’ Ethernet Cable
Use this cable to connect the Elite Power
Kit to your internet access point.
50’ Ethernet Cable
Run this cable from the Elite Power Kit to
your Ring Doorbell.
Elite Mounting Bracket (optional)
If installing Ring Elite on an existing
junction box, you don’t need to use this
bracket. If you do use this bracket, you
should remove the existing junction box.
Mounting Screws (5)
Attach Ring Elite to the bracket with two
screws. Use two other screws to attach the
Elite Power Kit to your wall, if you’d like.
Before you begin
Check out all the stuff in the box.
Screwdriver Handle
Screw Bit
Use the Phillips end for installation. If you
are securing existing doorbell wires in the
small connectors on the back of Ring Elite,
use the flathead end.
Flexible Bit
Use it for screwing the security screw into
the bottom of Ring Doorbell Elite after
installing the faceplate.
Security Screws (2)
Use one to secure the faceplate. Put the
other one in your toolbox for the inevitable
moment that the first one gets dropped in
the bushes.
Faceplates (4)
Select the color that best matches your
home…or your mood.
54
Internal doorbell
Internet
AC adapter
POE
Elite Power Kit
Ring Elite
LAN Transformer
Wiring the Elite Power Kit
The Elite Power Kit is a PoE injector that converts
internet in to Power Over Ethernet out.
To get started, connect the Elite Power Kit to AC,
using the provided adapter.
Then, use the provided 3 foot ethernet cable to
connect your access point to the Internet In port on
the Elite Power Kit.
Run cable to your Ring Elite
Run the 50 foot cable to the location where you’ll be
installing Ring Elite.
Wiring Ring Elite to an internal doorbell is optional.
If you do so, shut off power at the breaker before
connecting your existing doorbell
wires to the small wire terminals
on the back of Ring Elite.
76
How it all fits together
If you need a visual overview, see the diagram to the
right. This is how is all fits together.
Note that as you screw the Elite Mounting Bracket
into your wall, the “wings” will rotate and lock the
bracket into place.
98
55mm
92mm
Mark the install location
If you already have a junction box at the location
where you’re installing your Ring Elite, skip the
next couple of steps and screw it directly into that
junction box.
If you don’t have a junction box, trace the outline of
the supplied template, then cut a rectangular hole
in your wall to make room for the Elite Mounting
Bracket.
1110
Install the Elite Mounting Bracket
Make sure any wires in your wall come through the
hole in the middle, and screw the bracket in using
the two screws in the corners.
The wing clamps will rotate as the screws turn and
lock the bracket into your wall.
1312
Plug in the ethernet cable
Plug the ethernet cable coming out of your wall into
the ethernet port on the back of Ring Elite.
As long as this cable is connected to power, the
front light on Ring Elite will begin spinning and it will
begin talking to you to let you know that it is ready to
be set up in the Ring app.
1514
Connect doorbell wires (optional)
If wiring Ring Elite to an internal doorbell, first shut
off power at the breaker, then connect your doorbell
wires to the small wire connectors next to the
ethernet port.
Then use the provided flat-head screwdriver to
secure the wires in the screw holes.
1716
Screw Ring Elite into the bracket
Using two of the provided screws, screw Ring Elite
into the bracket to secure it on your wall.
1918
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere ring Zubehör Handbücher
ring
ring Elite Bedienungsanleitung
ring
ring Contact Sensor Bedienungsanleitung
ring
ring VIDEO DOORBELL Bedienungs- und Sicherheitshinweise
ring
ring Doorbell Pro Bedienungs- und Sicherheitshinweise
ring
ring Video Doorbell Gen.2 Bedienungsanleitung
ring
ring Doorbell Pro Bedienungsanleitung
ring
ring Doorbell Pro 2 Bedienungsanleitung
ring
ring VIDEO DOORBELL Bedienungsanleitung
ring
ring 5B28S5 Bedienerhandbuch
ring
ring Motion Sensor Bedienungsanleitung
ring
ring Video Doorbell 4 Bedienungsanleitung
ring
ring VIDEO DOORBELL Bedienungs- und Sicherheitshinweise
ring
ring 5AT3T5 Bedienungsanleitung
ring
ring Doorbell Pro 2 Bedienungsanleitung
ring
ring VIDEO DOORBELL Bedienungsanleitung
ring
ring 5F52E9 Bedienerhandbuch
ring
ring Peephole Cam Bedienungsanleitung
ring
ring Pro 2 Bedienungsanleitung
ring
ring Stick Up Cam Bedienungs- und Sicherheitshinweise
ring
ring chime Bedienungsanleitung
