Rion VA-12 Bedienungsanleitung
3-20-41 Higashimotomachi, Kokubunji, Tokyo 185-8533, Japan
http://www.rion.co.jp/english/
INSTRUCTION MANUAL
VIBRATION ANALYZER
VA-12
i
Organization of this manual
This manual describes the features, operation and other aspects of the Vibration
Analyzer VA-12. If the unit is used together with other equipment to congure a
measurement system, consult the documentation of all other components as well.
The section starting on page v contains important safety precautions. Be sure to
read this section carefully.
This manual contains the following sections.
-
General Operation
-
Outline
Gives an overview of the unit.
Controls and Features
Briey identies and explains the operation panel keys, connectors on the
top and bottom, and other parts of the unit.
Preparations
Describes how to prepare the unit for use, including information on making
connections, power-up, and inserting the SD card.
Menu Operation
Describes how to use the menus of the unit.
Analysis Functions
Describes the different analysis function available with the unit and how
to select them.
Measurement in Vibration Meter Mode
Describes the display screen contents and operation steps in vibration meter
mode.
ii
Measurement in Time Waveform Mode
Describes the display screen contents and operation steps in time waveform
mode.
Measurement in FFT Mode
Describes the display screen contents and operation steps in FFT mode.
Recording Waveform Data
Describes the waveform recording function.
Recalling Stored Data
Describes how to recall data that were saved from the various measurement
screens, and how to view recalled data.
Saving the Screen as a BMP File
Describes how to save the currently displayed screen as a BMP le.
Printing
Describes how to print data from the measurement screen and recall
screen.
-
Advanced Operation
-
Trigger Functions
Describes the use of trigger signals and the relationship between triggering
and various measurements.
Overlay Display
Describes how to use the overlay function in FFT mode.
Setup Files and Initialization
Describes how to use setup les and lists the default settings for various
items.
Power Supply
Provides information about powering the unit.
iii
* Company names and product names mentioned in this manual are
usually trademarks or registered trademarks of their respective
owners.
Using the Backlight
Describes how to use the display backlight.
Status Display
Lists the various status indication symbols and other indicators of the
unit.
SD Card
Describes how to use an SD card with this unit and explains the folder
structure for storing data on the card.
Data File Structure
Describes the structure of data les stored on the SD card.
Setting Commands
Describes the setting commands that express various measurement and
display parameters of the unit.
-
Other Information
-
Specications
Lists the technical specications of the unit.
Index
iv
To conform to the EU requirement of the Directive
on Waste Electrical and Electronic Equipment,
the symbol mark on the right is shown on the
instrument.
Note: CE requirements are met provided that a core lter is tted
to every cable.
A
B
HI
G
USB
TRIG
IN
DC IN
AC adapter
NC-99
INPUT
OPTION
C
D
E
F
Core A: E04SR130525A (SEIWA)
Core B: ZCAT2035-0930 (TDK)
Core C, G, H: E04SS201010 (SEIWA)
Core D, E, F: ZCAT2017-0930 (TDK)
Core I: ZCAT2436-1330 (TDK)
Equivalent product
This product can be used in any areas including residential areas.
v
FOR SAFETY
In this manual, important safety instructions are specially marked as shown
below. To prevent the risk of death or injury to persons and severe damage
to the unit or peripheral equipment, make sure that all instructions are fully
understood and observed.
Caution
WARNING
Important
Disregarding instructions
printed here incurs the risk of
death or severe injury to per-
sons.
Disregarding instructions
printed here incurs the risk of
injury to persons and/or dam-
age to peripheral equipment.
Disregarding instructions
printed here incurs the risk of
damage to the product.
Denotes special information
that is helpful in utilizing the
capabilities of the unit but that
is not directly related to safety.
Note
vi
vii
WARNING
Be careful around rotating machinery.
•When making measurements on exposed rotating parts or power train parts
of machinery, proceed with utmost care to ensure that the accelerometer
or accelerometer cable do not get caught in the machine.
•When making measurements on exposed rotating parts or power train
parts of machinery, do not use the shoulder belt. If they are rolled in the
machine, a dangerous accident is caused.
viii
Andere Handbücher für VA-12
1
Inhaltsverzeichnis
Andere Rion Messgerät Handbücher
Rion
Rion NL-42 Bedienungsanleitung
Rion
Rion DMI108 Bedienungsanleitung
Rion
Rion NL-42 Bedienungsanleitung
Rion
Rion PV-91C Bedienungsanleitung
Rion
Rion VM-54 Bedienungsanleitung
Rion
Rion NL-42A Bedienungsanleitung
Rion
Rion VA-11 Bedienungsanleitung
Rion
Rion VM-56 Bedienungsanleitung
Rion
Rion HCA518T Bedienungsanleitung
Rion
Rion NA-27 Bedienungsanleitung
Rion
Rion UN-14 Bedienungsanleitung
Rion
Rion DMI Series Bedienungsanleitung
Rion
Rion UV-15 Bedienungsanleitung
Rion
Rion VM-55 Bedienungsanleitung
Rion
Rion NL-22 Bedienungsanleitung
Rion
Rion NL-62 Bedienungsanleitung
Rion
Rion VM-63A Bedienungsanleitung
Rion
Rion VA-12 Bedienungsanleitung
Rion
Rion NL-53 Bedienungsanleitung
Rion
Rion DMI610 Bedienungsanleitung
