RIOTEC IDC9270D Bedienungsanleitung

Quick Guide

- iDC9270D

Connect to micro USB port of

Smartphone

*Before you use scanner, please switch to "C- Charge

mode" and charge inside battery for 3~4 hours first.

*Under “C- Charge mode”, you can raise/lower soft-

keyboard easily. (For HID profile only)

*iDC9270D is with Li-Ion battery inside. When in

charging, please use the original USB power adaptor

of Smartphone (recommended). Through it, it charges

both smartphone & iDC9270D batteries at the same

time.

*When in low battery (Orange LED flashing), please

charge it immediately.

*In case the power consumed out totally; the RTC (Real

Time Clock) will back to original setting 01012000.

Attention: Please don’t charge iDC9270D when in Operation

mode. Otherwise, the smartphone’s battery will charge back

to iDC9270D’s battery.

** When pressing Left button + Right button for 8~9

seconds, iDC9270D will enter deep sleeping mode.

** Please press Left button + Right button + Touch trigger

for 8~9 seconds to activate iDC9270D.

** The touch sensor area is around the central area.

Please check the above drawing for your reference.

LED Indicator Information

Orange LED ON

Full charged

Orange and Red LED Flashing

Charging

Orange LED Flashing

Low battery

Red LED ON

Off line / out of service

Green LED ON

Good read

Orange LED ON

Good read (Batch mode)

O=Operation mode

C=Charge mode

Left Button

Under BT HID Profile, press Left button to

raise/lower soft-Keyboard; press the left button for 4

seconds to un-pair. Then, scanner can be connected

with other BT devices (Please check page #2, left

column)

Touch Trigger Area

SCAN/ Power ON

Press 1 second to wake it

up from power saving

mode

Right Button

Power Saving button:

Press the button for 4 second

then enter power saving mode

Indicator

(LED)

Charge port

Suction Cup

PU Glue

(Can be used

repeatedly)

Micro USB

cable (OTG)

Exit Window

Li- Ion Battery inside

Indicator (LED)

How to Connect to Smartphone

1. Make sure your device has BT HID or SPP profile

2. Turn off Power-Saving mode on your smartphone first

3. Then, choose HID or SPP profile and scans the following 2

setting codes before connecting to smartphone.

(a1 a2 or b1 b2)

If you don’t know what profile your device is, please try HID

profile first, then, SPP profile.

HID profile

SPP profile

4. Please complete the connection procedures as the right photos.

5. After the connection is completed, the RED light will be OFF.

6. Before using WordPad file or appropriate APP, please set

keyboard language of device to User’s language. Then, scan

the barcodes and the barcode data will show on the cursor side.

Soft-Keyboard setting code for Android / iOS

For Android

For iOS

Under Android system, if you want to raise/lower soft-keyboard, please

read the above setting code first. Then, press left button (refer to

drawing #5 on page #1) to raise keyboard (LED is RED /Bluetooth is

offline), press it again to lower keyboard (LED is off/ Bluetooth is online)

*It will take 5~10 seconds to make BT online/offline.

*Please be noted that when BT is offline, scanning function is

stopped.

*Or, switch “C” to “O” to make BT online. (Drawing 3, page #1)

Under iOS system, press Left button to raise/lower soft-Keyboard;

Press the left button for 4 seconds to un-pair. Then, scanner can be

connected with other BT devices

1. click the “Settings”

2. click “General”

3. click “Bluetooth”

4. Turn it ON, and search the

Devices

5. Select “Rxxxxxx” to connect

6. When see the “Connected”

means the connection is OK.

(example: pairing with iPhone)

Reset Configuration to Defaults

(scan from A1 to A7 for HID Profile or B1 to B2 SPP Profile)

HID Profile

SPP Profile

%H%I%D

%S%P%P

%B%R%C

%A%N%R

%I%O%S

%%RSDF

%SETUP

Demo

%D%F%T

8002

%%%END

Demo

%D%F%T

There are two operating modes on the scanner

1.Data Transmission mode (Default)

It is a necessary to scan “clean memory data" when

switching between these two modes.

Within Bluetooth radio

range

Beyond Bluetooth radio range

Data

read

Transmit data to

PC/terminal directly

Save data into scanner’s memory,

scanner will transmit data to PC/

terminal automatically when back to

Bluetooth radio range.

Enter Data Storage mode

LED

Green/ Orange LED flashes

followed by 3 beeps.

2.Data Storage mode (Batch Mode)

It is a necessary to scan “clean memory data" when switching

between these two modes.

Data

read

Save data directly to scanner’s memory, It will transmit the data to

PC/ terminal after you scan the Transmit memory data code. To

delete data please scan the Clean memory data code.

Enter Data Transmission mode

LED

Green/Orange LED flashes followed by 3 beeps.

Always Clean memory data before switching to Data Transmission

Mode. Otherwise Red/ Orange LED will flash with one long beep and

will not switch modes.

Under Data storage Mode

The data can be keep or delete by option after transmit

Keep the data

(Default)

Delete the data

Transmit memory data

Green/Orange LED Flashes followed by 3 beeps

Clean memory data

Green/Orange LED flashes followed by 3 beeps

The barcode data which is stored in the memory will be deleted.

Trigger Mode

Trigger always

(Trigger available at any time)

Trigger standard (Default)

(Trigger available, after data sent to the device)

Transmission Speed

Transmission speed is dependent on your device. In order not to lose

data, please choose the correct speed. Middle-speed is the Default.

High-speed

Ultra Slow-speed

transmission

1transmission

Middle-speed

Ultra Slow-speed

transmission

2transmission

Slow-speed

Ultra Slow-speed

transmission

(Default)

3transmission

Power-saving Mode

Power-saving mode OFF

Power-saving mode ON (Default):

Enter power-saving mode after 5-minute

inactivity. This function converses battery

power. When you press "SCAN/Power ON"

button, it will wake up and begin to scan.

Power-saving mode ON:

Enter power-saving mode after 10-minute

inactivity. This function converses battery

power. When you press "SCAN/Power ON"

button, it will wake up and begin to scan.

*When charging, the scanner will not enter power-saving mode

automatically.

RTC (Real-time clock),

please set the punctuation mark at the same time

You must scan the below configuration barcode to set the date &

time stamp on the scanner.

Date information:

ENABLE

Date information:

DISABLE (default)

Time information:

ENABLE

Time information:

DISABLE (default)

The format of Date setting

Date format 1: mm/dd/20yy (default)

For example: 01/23/2011

Date format 2: dd/mm/20yy

For example: 23/01/2011

Date format 3: 20yy/mm/dd

For example: 2011/01/23

The punctuation marks for the intervals among

barcode data, date, time

, comma (default) –FOR Android/iOS use

For example:

ABCD,01/23/2011,12:34:56

Tab –FOR iOS use

For example:

ABCD 01/23/2011 12:34:56

; semicolon –FOR Android/iOS use

For example:

ABCD;01/23/2011;12:34:56

Demo

%M%A%F

Demo

%M%A%N

Demo

%M%D%K

Demo

%M%D%E

Demo

%R%E%C

Demo

%E%R%A

Demo

%R%T%E

Demo

%R%T%D

Demo

%B%T%H

Demo

%B%T%L

Demo

%P%D%T00

Demo

%P%D%T05

Demo

%P%D%T10

Demo

%D%I%N

Demo

%D%I%F

Demo

%T%I%N

Demo

%T%I%F

Demo

%T%S%C,

Demo

%T%S%C

Demo

%T%S%C;

Date and Time setting

SET DATE

Scan the SET DATE barcode, then, scan the

six numeric digits in the format mm/dd/yy,

from the numeric barcode.

For example: “01/23/2011”, please input

012311

SET TIME

Scan the SET TIME barcode, then, scan the

six numeric digits in the format hh:mm:ss from

the numeric barcode. Time format: 24hr clock

For example: “PM 3:25:30”, please input

“152530”

Keyboard Country (For HID profile only)

Scan the appropriate country code as below

to program the keyboard layout for your

country or language. As a general rule, the

following characters are supported, but

need special care for countries other than

the United States: @ | $ # { } [ ] = / ‘ \ <

> ~

Follow the steps mentioned below to program.

1. Keyboard Country setting code.

2. “Select Country Code”

Read numeric barcode (according to country code).

Country/

Language

No.

Country/

Language

No.

Country/

Language

No.

U.S.

Netherlands

Switzerland

French

Latin

America

Hungary

Switzerland

German

Brazil

Italian

Sweden

Belgium

Icelandic

Turkey F

Bulgarian

Latin

Norway

Turkey Q

Denmark

Poland

Japan

Finland

Portugal

Korea

France

Russia

Thai

Germany

Spain

Vietnam

How to append a “prefix” or a “suffix” to the

barcode data

prefix

suffix

1. scan above configuration code for Prefix or Suffix

2. enter the required values (right, numeric barcode) for Prefix or Suffix

using the hex values for the desired HEX values from Prefix & Suffix

TABLE (below page)”

3. then, end by scanning Code X (below, right)

*The max. of special characters is 5.

*When you append 1~4 required values for Prefix or Suffix, it must end

with Code X.

*It doesn’t need Code X, if you append 5 values to barcode data.

How to delete Prefix or Suffix

1. scan above configuration code for Prefix or Suffix

2. enter the “0” “0” (above, left)

3. then end by scanning Code X (below, right)

Numeric barcode for settings

Prefix & Suffix TABLE

HEX

HID

(SPP)

HEX

HID

(SPP)

HEX

CTRL A

(SOH)

CTRL Y

(EM)

SPACE

CTRL B

(STX)

CTRL

Z(SUB)

CTRL C

(ETX)

ESC

(ESC)

CTRL D

(EOT)

CTRL \

(FS)

;

CTRL E

(ENQ)

CTRL ]

(GS)

CTRL F

(ACK)

CTRL ^

(RS)

CTRL G

(BEL)

CTRL _

(US)

Backspace

(BS)

Tab

(HT)

HEX

HID

Only

(

CTRL J

(LF)

)

CTRL K

(VT)

CTRL L

(FF)

[

Enter

(CR)

CTRL N

(SO)

]

CTRL O

(SI)

CTRL P

(DLE)

CTRL Q

(DC1)

CTRL R

(DC2)

CTRL S

(DC3)

F10

CTRL T

(DC4)

F11

{

CTRL U

(NAK)

F12

CTRL V

(SYN)

}

CTRL W

(ETB)

CTRL X

(CAN)

www.tec-it.com

%T%S%D

Demo

%T%S%T

Demo

%C%P%S

Demo

%C%S%S

Demo

www.tec-it.com

Demo

Barcode Configuration Method:

Please follow the below 1~5 steps to complete the

“Symbologies enable” or “Symbologies disable”

1. Start Configuration 2. Choose one Symbologies

3 & 4 scan 2 Enable (or Disable) setting codes

5. End Configuration

Start

Configuration

1D Symbologies –1

UPC-A

UPC-E

EAN-13

(ISBN/ISSN)

EAN-8

Industrial

2 of 5

Matrix

2 of 5

Code 93

Code 11

MSI/Plessey

UK/Plessey

1D Symbologies –2

Codabar

ISBT 128

UCC/EAN 128

Interleaved

2 of 5

Code 39

(Code 32)

GS1 DataBar

China Post

GS1 DataBar

Expanded

GS1 DataBar

Limited

Enable

Disable

Enable

Disable

End

Configuration

Information in this document is subject to change without notice.

For more information, please visit:

www.riotec.com.tw

R_180807_01

%SETUP

1101

1201

1301

1401

1701

1801

2101

2201

2301

2401

1901

3301

2501

1601

1501

2701

2601

2901

2801

%%%END

Inhaltsverzeichnis

Andere RIOTEC Barcode-Lesegerät Handbücher

RIOTEC

RIOTEC iLS6307JBQ Bedienungsanleitung

RIOTEC

RIOTEC RIOSCAN iLS6302JS Bedienungsanleitung

RIOTEC

RIOTEC iDC9607AW Bedienungsanleitung

RIOTEC

RIOTEC iDC9502N Bedienungsanleitung

RIOTEC

RIOTEC LS6300E Bedienungsanleitung

RIOTEC

RIOTEC RIOSCAN iLS6307LS Bedienungsanleitung

RIOTEC

RIOTEC iDC9600KW Bedienungsanleitung

RIOTEC

RIOTEC DC9252NP Bedienungsanleitung

RIOTEC

RIOTEC FS5103A Bedienungsanleitung

RIOTEC

RIOTEC DC9257LP Bedienungsanleitung

RIOTEC

RIOTEC FS5107A Bedienungsanleitung

RIOTEC

RIOTEC DC9250 Bedienungsanleitung

RIOTEC

RIOTEC RIOSCAN iLS6303XS Bedienungsanleitung

RIOTEC

RIOTEC iDC9508K Bedienungsanleitung

RIOTEC

RIOTEC DC9258KP Bedienungsanleitung

RIOTEC

RIOTEC iLS6300JBQ Bedienungsanleitung

RIOTEC

RIOTEC OM7220J Bedienungsanleitung

RIOTEC

RIOTEC iDC9608K Bedienungsanleitung

RIOTEC

RIOTEC LS6000B series Bedienungsanleitung

RIOTEC

RIOTEC iLS6307LBM Bedienungsanleitung

RIOTEC

RIOTEC OM7520M Bedienungsanleitung

RIOTEC

RIOTEC iLS6300DBU Bedienungsanleitung

RIOTEC

RIOTEC iDC9607A Bedienungsanleitung

RIOTEC

RIOTEC LS6308J Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

RIOTEC iDC9270D Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken