Riva RC3402HD-6311IR Bedienungsanleitung

RC3402(63IR)04-2014-B

Quick Installation Guide

This manual provides instructions for quick installation and basic configuration of your IP device.

1. Part names and positions

Make sure if the polarity is correct. Incorrect connection may

cause malfunction or damage to the IP device.

Caution

Power Adaptor Connector (DC 12V)

* Model design and appearance are subject to change without any prior notice.

④

⑤

③

①LAN connector(POE supported)

②Reset button

③microSD/SDHC slot

④Power Cable connector(DC 12V)

⑤Video Output connector

< Enlarged image of ferrite core clip open >

< How to make a loop around the ferrite cores >

1. Open the ferrite core by lifting the clip.

2. Make one loop with the cable through the

ferrite core.

3. Close the ferrite core to hold the cable loop

into place.

Installing the ferrite core on the cable is to suppress high frequency noise level

in electronic singals.

Note

①

②

IPN3402HD-6311

* It is highly recommended to

install the provided ferrite cores

on the two cables respectively

like the image around this text.

Please also see <How to make a

loop around the ferrite cores>

below for more details.

ZCAT1518-0730 ZCAT2132-1130

* The smaller ferrite core is for the MCX cable, and the bigger one is for the LAN cable.

LAN cable

MCX cable

RC3402(63IR)04-2014-B

돔커버 개폐

핸들

2. Install IP device

There is only one type of mounting the device explained in this manual. Refer to the device’s installation guide

for more various mounting types.

< How to remove the dome cover >

Remove the dome cover with the opener included in the package like the image below.

< How to close the dome cover >

When closing the dome cover, look for the carved trapezoid mark on both dome cover

and main body. Both trapezoids should be aligned together like the image below.

To prevent products from damage, place the camera on a stable and non-vibrating

surface. If the stability is in doubt, consult safety personnel for reinforcements, and

then proceed with the installation.

Caution

?128,000 ?128,000

148,000

100,000

100,339

DIMENSION

IPN3402HD-6211

< hole for cable routing >

Mounting plate

1) Place the installation template included in the

package on the desired installation surface.

2) Drill holes on correct spots based on the template

paper, and insert the anchor blocks into the

holes.

3) Remove the dome cover with the opener

included in the package.

4) Place the camera on the surface to match the

alignment holes with the inserted anchor blocks.

5) Tighten the screws into the anchor blocks.

6) Adjust the angle of the camera. Refer to 3. Adjust

angle of the camera for the details.

7) Connect necessary cables including a LAN cable

and a power cable to the camera. Then, route the

cables through the hole on the edge of the

mounting plate. Look at the image on the left to

identify where the hole is located.

8) Attach the dome cover on main body and push it

toward main body until a “tick”sound is heard.

Note

Opener

1) Insert the tip of the opener in the notch.

2) Give a little snap on the opener toward the upper right direction.

Then, the dome cover will be easily detached.

RC3402(63IR)04-2014-B

3. Adjust angle of the camera

1) Adjust the angle by manually moving the camera gimbal and the horizontal platform following the

instruction below.

2) Connect to the web page of the device to see its real-time image. Refer to 6. View video on web page for

details about using its web page.

Refrain from continuous rotation of the camera gimbal to a single direction

as it is attached with a cable inside the dome.

4. Adjust zoom and focus

Once you are on the webpage, go to Setup> Video & Audio> Zoom/Focus. Then, the features shown below

will appear.

1) Manual Focus: Adjust zoom and focus by clicking arrow buttons: the buttons move the lens more

extensively than the buttons .

2) Auto-Focus: Click One Click Focus to automatically set the lens.

Caution

①To adjust lens position, rotate the camera gimbal.

②To pan, rotate the horizontal platform, which is surrounded by

the mounting plate.

③To tilt, tilt the lens by vertically adjusting the camera gimbal.

*The range for tilting is from the default upright position

to about 60 degrees downward.

①

②

③

RC3402(63IR)04-2014-B

5. Set up network environment

The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of the device from

converting the MAC address’s hexadecimal numbers, which is attached to the device. Be sure that the device

and PC are on the same area network before running the installation. If the network segment is different

between your PC and the device, change your PC’s settings as follows.

IP address : 192.168.xxx.xxx

Subnet mask: 255.255.0.0

Generic IP Environment

In case of generic private network environment where IP address 192.168.XXX.XXX are used, users may view

the live streaming images on a web page using the device’s default IP address:

1. Convert the device’s MAC address to the IP address. Refer to the Hexadecimal-Decimal Conversion Chart at

the end of the manual.

(The MAC address of the device is attached on the side or bottom of the device.)

2. Start the Microsoft® Internet Explorer web browser and enter the IP address of the device.

3. Web streaming and device configurations are supported through ActiveX program. When the ActiveX

installation pop-up window appears, authorize and install the ActiveX setup.exe.

MAC address = 00-13-23-01-14-B1 → IP address = 192.168.20.177

Convert the last two sets of hexadecimal numbers to decimal numbers.

RC3402(63IR)04-2014-B

IPAdminTool

IPAdminTool and the manual can download from www.rivatech.de homepage.

IPAdminTool is a management tool, which automatically scans all of the network products for users to perform

administrative tasks, which includes network configurations, firmware update, device reboot, and device

organizations.

To modify the device’s default IP address for customized network area;

1. Find the device from the IPAdminTool’s list and highlight the device’s name.

2. Right-click the mouse and select IP Address; IP Setup window appears.

3. In the IP Setup’s window, information under Local Network information displays the user/PC’s network

area information. Those information need to be incorporated to the IP Address, Subnet Mask, Gateway,

and DNS boxes, except the last 2 sets of IP Address, which are to be the unique numbers for the device.

Refer to the image above for the setting

4. Click Setup to complete the modification.

5. Enter the user name and the password, and then select Login.

(The default username and password are: root and pass.)

More Information

To learn more about using other features of your devices, refer to the manuals as “RIVA Web Interface Manual

Full HD Series” or “VCAsys Manual ”, which is available on www.rivatech.de homepage

PC environment Info

Give new unique IP address in

last two sets and mirror other

information in other boxes

RC3402(63IR)04-2014-B

6. View video on web page

Once the device’s proper IP address has been identified, type the URL in a web browser to access the camera.

At first time access, installation window may pop up.

1. When the browser asks to install the AxUMF software, click Install to proceed.

2. When Setup installation pop-up window appears, click Install to proceed with rest of installations.

Depending on system OS and Internet Explorer version, installation experience may differ from

one another. Figures described above are from Windows 7, Internet Explorer 9 environment.

7. SETUP page

To set up the device configuration:

1. Click Setup on the upper left of the web page. The login page is displayed as below.

2. Enter the user name and the password, and then select OK.

(The default username and password are: root and pass.)

To learn how to set up the web page for advanced configuration, refer to the Web Page User's Manual.

8. Reboot

Perform the following procedures to reboot your device:

1. Press the Reset button, and hold it for 2 seconds while the device is in use.

2. Wait for the system to reboot.

Please do not hold for more than 2 seconds. Otherwise, the camera may be

switched to its Factory Default settings.

Note

Caution

RC3402(63IR)04-2014-B

9. Factory Default

Resetting the device back to the factory default will initialize all parameters including the IP address back to the

factory defaults. To reset to the factory default:

1. Press the reset button and hold it while the device is in use.

2. Release the button after 10 seconds.

3. Wait for the system to reboot.

The factory default settings can be inferred as follows:

IP address: 192.168.xx.yy

Network mask: 255.255.0.0

Gateway: 192.168.0.1

User ID: root

Password: pass

10. Safe Mode

Your device will get restarted with safe mode when the device does not completely boot certain times.

The errors are mainly caused by these two factors: power source unplugged or damage occurred on

firmware file during the system boot.

The messages like below will appear on the webpage when your device has been rebooted in ‘safe mode’.

Then, you should follow the instructions on the webpage according to the steps in a row.

There is another method to update firmware, which is using IPAdminTool.

Please refer to ‘IPAdminTool User’s Manual.pdf’for the detailed procedure.

Note

If your device is still in safe mode after trying to update firmware, please contact

your local agency to get further assistance.

Note

RC3402(63IR)04-2014-B

Hexadecimal-Decimal Conversion Table

Refer to the following table when you convert the MAC address of your device to IP address.

Hex

Dec

Hex

Dec

Hex

Dec

Hex

Dec

Hex

Dec

Hex

Dec

Hex

Dec

111

148

185

222

112

149

186

223

113

150

187

224

114

151

188

225

115

152

189

226

116

153

190

227

117

154

191

228

118

155

192

229

119

156

193

230

120

157

194

231

121

158

195

232

122

159

196

233

123

160

197

234

124

161

198

235

125

162

199

236

126

163

200

237

127

164

201

238

128

165

202

239

129

166

203

240

130

167

204

241

131

168

205

242

132

169

206

243

133

170

207

244

134

171

208

245

135

172

209

246

136

173

210

247

100

137

174

211

248

101

138

175

212

249

102

139

176

213

250

103

140

177

214

251

104

141

178

215

252

105

142

179

216

253

106

143

180

217

254

107

144

181

218

255

108

145

182

219

109

146

183

220

110

147

184

221

Inhaltsverzeichnis

Andere Riva Sicherheitskamera Handbücher

Riva

Riva RC6702HD-6311 Bedienungsanleitung

Riva

Riva RC4202HD Bedienungsanleitung

Riva

Riva RC6702HD-6211 Bedienungsanleitung

Riva

Riva IPX5502HD-6415-05 Bedienungsanleitung

Riva

Riva RC100 Bedienungsanleitung

Riva

Riva RC6702SV-7311 Bedienungsanleitung

Riva

Riva RC4100-IN Bedienungsanleitung

Riva

Riva RC3402HD-6211IR Bedienungsanleitung

Riva

Riva RC3502HD-5211IR Bedienungsanleitung

Riva

Riva RC302HD-5117 Bedienungsanleitung

Riva

Riva RC4602HD-6416 Bedienungsanleitung

Riva

Riva RC3402HD-6311 Bedienungsanleitung

Riva

Riva RC6602HD-5311 Bedienungsanleitung

Riva

Riva RC3502HD-5311 Bedienungsanleitung

Riva

Riva RC362HD-6211IR Bedienungsanleitung

Riva

Riva RC362HD Bedienungsanleitung

Riva

Riva RC3500M Bedienungsanleitung

Riva

Riva RC3202HD-6111W Bedienungsanleitung

Riva

Riva RC3500 Bedienungsanleitung

Riva

Riva RC5510 Bedienungsanleitung

Riva

Riva RC5510 Bedienungsanleitung

Riva

Riva RC3502HD-5311 Bedienungsanleitung

Riva

Riva RC3502HD-5311IR Bedienungsanleitung

Riva

Riva RC6702SV-7311 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung