RKI Instruments 01-Series Bedienungsanleitung

Quick Reference Guide For 01-Series

Note: Turn on and adjust the 01-Series gas monitor in a known fresh air area.

1. Press and hold POWER/MODE button for 3

seconds to turn instrument ON

2. Warm-up sequence

a. All segments of LCD turn on.

b. LCD back light turns on.

c. Buzzer sounds and vibrator activates.

d. Alarm lights ﬂash.

e. Instrument shows target gas and battery voltage.

f. Buzzer will sound after battery voltage is displayed.

g. Instrument is now in normal operating mode.

Note: If instrument gives a low battery or dead battery alarm,

replace batteries or recharge (GP-01 only) before use.

3. Performing Fresh Air Adjustment

a. Press and hold the AIR button. The LCD displays “hold”.

b. Release the AIR button when LCD displays “Adj”.

c. The instrument will set reading to 0 ppm (H2S/CO), 0% LEL

or 20.9% Vol. oxygen depending on the instrument.

4. Displaying PEAK, STEL and TWA (CO and H2S

versions)

a. Press and release the POWER/MODE button to display the

PEAK gas reading.

b. Press and release the POWER/MODE button again to

display STEL reading.

c. Press and release the POWER/MODE button again to

display the TWA reading.

d. Press and release POWER/MODE button again to return to

normal measuring mode.

Note: If no button is pressed for 20 seconds, the instrument will

automatically return to measuring mode.

Quick Reference Guide For 01-Series

PN 72-0141RK Rev 0

RKI Instruments, Inc. 33248 Central Ave, Union City, CA 94587

Phone (510) 441-5656 • (800) 754-5165 • www.rkiinstruments.com

5. Displaying MIN and MAX readings (OX-01)

a. Press and release POWER/MODE button to display the

minimum oxygen reading.

b. Press and release the POWER/MODE button again to

display the maximum oxygen reading.

c. Press and release POWER/MODE button again to return to

normal mode.

6. Changing the Alarm Points

a. Make sure that 01-Series is OFF.

b. Press and hold the AIR button, then press and hold the

POWER/MODE button. As soon as segments appear on the

display (approximately 1 second), release the AIR button.

When the unit “beeps,” release the POWER/MODE button

to put the 01-Series into alarm point adjustment mode. The

LCD should display the low alarm setting.

c. Use the the AIR button to increase the alarm point. Once

selected, press the POWER/MODE button to select the next

alarm level.

d. Press the POWER/MODE button repeatedly until the ROM

number of your unit appears on the LCD. The 01-Series will

then go into its startup sequence followed by the measuring

mode.

Note: Consult manual for additional information.

Inhaltsverzeichnis

Andere RKI Instruments Messgerät Handbücher

RKI Instruments

RKI Instruments GX-2003 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-Force Bedienungsanleitung

RKI Instruments

RKI Instruments EAGLE 2 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-2001 Bedienungsanleitung

RKI Instruments

RKI Instruments 65-2666RK-04 Bedienungsanleitung

RKI Instruments

RKI Instruments OX-500 Konfigurationshandbuch

RKI Instruments

RKI Instruments PS-2 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-2001 Bedienungsanleitung

RKI Instruments

RKI Instruments 72-RA-C Bedienungsanleitung

RKI Instruments

RKI Instruments beacon 410 Bedienungsanleitung

RKI Instruments

RKI Instruments EAGLE 2 Bedienungsanleitung

RKI Instruments

RKI Instruments GP-03 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-2012 Bedienungsanleitung

RKI Instruments

RKI Instruments beacon 410 Bedienungsanleitung

RKI Instruments

RKI Instruments 65-2322RKSS Bedienungsanleitung

RKI Instruments

RKI Instruments GP-03 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-6000 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-3R Bedienungsanleitung

RKI Instruments

RKI Instruments CO-04 Bedienungsanleitung

RKI Instruments

RKI Instruments CX-04 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-2012 Bedienungsanleitung

RKI Instruments

RKI Instruments 03 Series Bedienungsanleitung

RKI Instruments

RKI Instruments HS-04 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-8000 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung