RKI Instruments EAGLE 2 Bedienungsanleitung

www.rkiinstruments.com

Eagle 2 Maintenance

Data Loader

Operator’s Manual

Part Number: 71-0191RK

Revision: G

Released: 7/20/18

Warranty

RKI Instruments, Inc. warrants gas alarm equipment sold by us to be

free from defects in materials and workmanship, and performance for a

period of one year from date of shipment from RKI Instruments, Inc.

Any parts found defective within that period will be repaired or

replaced, at our option, free of charge. This warranty does not apply to

those items which by their nature are subject to deterioration or

consumption in normal service, and which must be cleaned, repaired,

or replaced on a routine basis. Examples of such items are:

Warranty is voided by abuse including mechanical damage, alteration,

rough handling, or repairs procedures not in accordance with the

instruction manual. This warranty indicates the full extent of our

liability, and we are not responsible for removal or replacement costs,

local repair costs, transportation costs, or contingent expenses incurred

without our prior approval.

This warranty is expressly in lieu of any and all other warranties and

representations, expressed or implied, and all other obligations or

liabilities on the part of RKI Instruments, Inc. including but not limited

to the warranty of merchantability or fitness for a particular purpose. In

no event shall RKI Instruments, Inc. be liable for indirect, incidental,

or consequential loss or damage of any kind connected with the use of

its products or failure of its products to function or operate properly.

This warranty covers instruments and parts sold to users only by

authorized distributors, dealers, and representatives as appointed by

RKI Instruments, Inc.

We do not assume indemnification for any accident or damage caused

by the operation of this gas monitor and our warranty is limited to

replacement of parts or our complete goods.

Absorbent cartridges Batteries

Pump diaphragms and valves Filter elements

Fuses

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installing the Eagle 2 Maintenance Data Loader Program . . . . . . . . . . . . . . . . 3

IrDA Downloading Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing an IrDA Adapter Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Windows® Wireless Link Operation Note . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Launching the Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Connecting an Eagle 2 to the Maintenance Data Loader Program . . . . . . . . . 8

Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Get Current Eagle 2 Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Select Distributed File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Transmit New Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Power OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Station and User Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Conversion Table Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

PID Sensor Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Obtaining a Relative Response Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Spare Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

1 • Introduction

Introduction

CAUTION: Read and understand this manual before using the Eagle

2 Maintenance Data Loader Program. Also read and

understand the Eagle 2 Operator’s Manual included

with the Eagle 2 portable gas monitor.

Using an advanced detection system consisting of up to six gas

sensors, the Eagle 2 Personal Gas Monitor detects the presence of

combustible gases, oxygen (O2), carbon monoxide (CO), and

hydrogen sulfide (H2S) simultaneously. The Eagle 2’s compact size

and easy-to-use design make it ideally suited for a wide range of

applications as described in the Eagle 2 Operator’s Manual. Please

read the Eagle 2 Operator’s Manual first before using the Eagle 2

Maintenance Data Loader Program.

The Eagle 2 Maintenance Data Loader Program allows you to change

various instrument parameters not accessible in the Eagle 2’s user

interface. It also allows you to save parameter configuration files based

on instruments’ parameter settings that can be viewed or used to

update another instrument’s parameter settings.

The purpose of this manual is to explain how to use the Eagle 2

Maintenance Data Loader Program. You will learn how to:

• install and launch the program

• install the downloading cable (if needed)

• connect to the Eagle 2 with the program

• change parameters in the Eagle 2

• save parameter configuration files that can be opened, viewed, and

edited in a word processing program

• save parameter configuration files that can be uploaded to an

instrument to change its parameter settings

• upload parameter configuration files to an instrument to change its

parameter settings

Before you get started, be sure to review system requirements in the

System Requirements • 2

next section.

CAUTION: The Eagle 2 detects oxygen deficiency and elevated

levels of oxygen, combustible gases, carbon monoxide,

and hydrogen sulfide, all of which can be dangerous or

life threatening. When using the Eagle 2, you must

follow the instructions and warnings in the Eagle 2

Operator’s Manual to assure proper and safe operation

of the unit and to minimize the risk of personal injury.

CAUTION: The operator of this instrument is advised that if the

equipment is used in a manner not specified in this

manual, the protection provided by the equipment may

be impaired.

System Requirements

To use the Eagle 2 Maintenance Data Loader Program, your personal

computer must meet the following requirements:

•Operating Systems: Windows® 7, Windows® 8, or Windows® 10.

•Processor: IBM® compatible PC running Pentium® 2 or higher.

•Memory: 32 MB RAM minimum

•Available Hard Disk Space: 32 MB minimum

• Infrared port or USB port and a USB/IrDA adapter cable

3 • Installing the Eagle 2 Maintenance Data Loader Program

Installing the Eagle 2 Maintenance Data

Loader Program

1. Launch Windows®.

2. Exit from all applications and open windows.

3. Go to www.rkiinstruments.com/eagle2.

4. Click on the Download tab.

5. Click the Eagle 2 Maintenance Data Loader link.

6. A .zip file will begin to download. Select whether you want to

open or save the .zip file.

7. Extract the contents of the .zip file.

8. Double click the setup.exe file.

9. After a few seconds, a screen appears indicating that the

InstallShield Wizard is preparing to install the E2 Maintenance

Setup, then the E2 Maintenance InstallShield Wizard window

appears to guide you through installation.

Figure 1: Eagle 2 User Setup Installation Program

IrDA Downloading Cable • 4

10.Follow the on-screen instructions in the InstallShield Wizard

Window to install the program.

11.If the InstallShield Wizard finds versions of Windows® files on

your computer newer than those in the downloaded .zip file, it will

ask you if you want to keep these newer files. Click Ye s .

12.When the InstallShield Wizard indicates that installation is

complete, click the Finish button.

IrDA Downloading Cable

The Eagle 2 communicates with a computer via an on-board infrared

communication port that complies with IrDA protocol standards.

NOTE: If your computer has a built-in infrared port, you do not need

an adapter cable to download data.

If your computer does not have an infrared port, you will need to

install an IrDA/USB adapter cable on your computer to use the Eagle 2

Maintenance Data Loader Program with your Eagle 2. The IrDA/USB

cable is available from RKI Instruments, Inc. See the Spare Parts List

at the end of this manual for the RKI part number.

Some versions of Windows® already have several infrared device

drivers loaded in Windows® and will automatically recognize a cable

during the installation process and guide you in installing the drivers.

Other versions of Windows® will require you to load device drivers

provided by the manufacturer of the cable during the installation

process. RKI makes no warranty for the operation or compatibility of

the drivers with any particular device.

5 • IrDA Downloading Cable

Installing an IrDA Adapter Cable

After installing the Eagle 2 Maintenance Data Loader Program,

connect the IrDA/USB cable to your computer and follow the

manufacturer’s instructions for installing the cable on your computer.

Make sure the cable is compatible with your Windows® operating

system.

If you do not have instructions from the cable manufacturer for

installing your cable, see your Windows documentation. In general,

you must go to the Control Panel and use the Add Hardware Wizard to

install the cable drivers.

Windows® Wireless Link Operation Note

When using an IrDA adapter cable and the Eagle 2 Maintenance Data

Loader Program on a Windows® computer, it is necessary to make a

special setting in the Wireless Link Configuration window for proper

communication between the Eagle 2 and the Eagle 2 Maintenance Data

Loader Program. This must be done before attempting to use the

program. Follow these steps to make this setting:

1. Click Start on the Windows® Icon Tray.

2. If Control Panel is available to select in the Start menu, select it.

The Control Panel will appear.

If Control Panel is not selectable in the Start menu but Settings is,

select Settings, then select Control Panel. The Control Panel will

appear.

3. If the Control Panel is viewed by category, open the Hardware

and Sound folder then click “Send or Receive a File” under the

Infrared section. The Infrared Configuration window will appear.

If the Control Panel is viewed by icon, click the Infrared icon. The

Infrared Configuration window will appear.

4. Click on the Image Transfer tab.

5. Deselect the selection box for “Use Wireless Link to transfer

images from a digital camera to your computer.”

IrDA Downloading Cable • 6

6. Click OK.

7. Close the Control Panel window.

Figure 2: Image Transfer Tab

7 • Launching the Program

Launching the Program

1. For Windows® 7 computers, click the Start icon in the Windows®

Icon Tray, then select Programs, then select E2 Maintenance.

Your operating system may also have a shortcut installed in the

Start menu.

For Windows® 8 and Windows® 10 computers, click the Start

icon in the Windows® Icon Tray, then click the downward-pointing

arrow icon in the lower left corner of the screen, then select E2

Maintenance from the list of apps.

2. The Main Window will appear.

3. For convenience, make a shortcut of the Eagle 2 Maintenance Data

Loader Program and place it on the Windows® desktop. See your

Windows® documentation for information about making shortcuts.

Figure 3: The Main Window

Andere Handbücher für EAGLE 2

Inhaltsverzeichnis

Andere RKI Instruments Messgerät Handbücher

RKI Instruments

RKI Instruments 65-2666RK-04 Bedienungsanleitung

RKI Instruments

RKI Instruments 01-Series Bedienungsanleitung

RKI Instruments

RKI Instruments GP-03 Bedienungsanleitung

RKI Instruments

RKI Instruments CO-04C Bedienungsanleitung

RKI Instruments

RKI Instruments 03 Series Bedienungsanleitung

RKI Instruments

RKI Instruments HS-04 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-8000 Bedienungsanleitung

RKI Instruments

RKI Instruments beacon 410 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-2001 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-6000 Bedienungsanleitung

RKI Instruments

RKI Instruments CO-04 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-2003 Bedienungsanleitung

RKI Instruments

RKI Instruments OX-500 Konfigurationshandbuch

RKI Instruments

RKI Instruments GX-2001 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-3R Bedienungsanleitung

RKI Instruments

RKI Instruments GX-Force Bedienungsanleitung

RKI Instruments

RKI Instruments GasWatch 2 Bedienungsanleitung

RKI Instruments

RKI Instruments CX-04 Bedienungsanleitung

RKI Instruments

RKI Instruments 65-2322RKSS Bedienungsanleitung

RKI Instruments

RKI Instruments GD-70D4 Series Bedienungsanleitung

RKI Instruments

RKI Instruments EAGLE 2 Bedienungsanleitung

RKI Instruments

RKI Instruments GP-03 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-2012 Bedienungsanleitung

RKI Instruments

RKI Instruments GX-6000 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung