Robertshaw 300-224 Technische Daten

Installation and Programming

Instructions for

Deluxe Programmable Thermostats

TABLE OF CONTENTS

INTRODUCTION

................................................................

STANDARD FEATURES

......................................................

4-6

THERMOSTAT LOCATION

..................................................

REMOVING THE THERMOSTAT FROM THE SUBBASE

..........

DESCRIPTION OF THE DIP SWITCH FUNCTIONS

.................

9-11

COVER LOCK

...................................................................

REPLACING THE THERMOSTAT ON THE SUBBASE

..............

WIRING DIAGRAMS

..........................................................

13-24

PROGRAMMING 7 DAY MODELS

.......................................

26-29

PLANNING YOUR SCHEDULE

..........................................

SETTING THE CURRENT DAY AND TIME

...........................

SETTING YOUR PROGRAM TEMPERATURES

....................

SETTING YOUR PROGRAM TIMES

...................................

TEMPERATURE OVERRIDE

...............................................

CHANGING FAHRENHEIT (F) TO CELSIUS ('C)

..................

CHANGING 12 HOUR TIME TO 24 HOUR TIME

..................

POWER FAILURES

..........................................................................

OUTDOOR TEMPERATURE INDICATOR (OPTIONAL)

...........................

PROGRAMMING 5/2 DAY MODELS

................................................

30-34

TYPICAL RESIDENTIAL SCHEDULE

..................................................

PLANNING YOUR SCHEDULE

..........................................................

SETTING THE CURRENT DAY AND TIME

...........................................

SETTING THE VVEEKDAY PROGRAM TIMES AND HEATING TEMPERATURES ......32-33

SETTING THE VVEEKEND PROGRAM TIMES AND HEATING

TEMPERATURES.

SETTING THE WEEKDAY AND WEEKEND COOLING TEMPERATURES

......

33-34

REVIEWING SCHEDULED TIMES AND TEMPERATURES

........................

CHANGING SCHEDULED TIMES AND TEMPERATURES

........................

SPECIFICATIONS

.........................................................................

36-37

IMPORTANT INSTALLER'S NOTE

...................................................

38-39

IMPORTANT;

Read this manual thoroughly to understand all

the features of your deluxe programmable thermostat.

INTRODUCTION

The Deluxe Programmable Thermostat represents the mast advanced solid-state, microcomput-

er temperature control an the market today. The thermostat incorporates state-of-the-art tech-

nology packaged in an extremely low profile designer series case. Ultra-Touch controls are com-

bined with an easy-to-read, full function liquid crystal display to provide the ultimate in user

friendly operation of your heating and air conditioning equipment.

STANDARD FEATURES

•

No batteries required - always remembers scheduled events and temperatures

•

100% solid state circuitry

•

Computerized heat anticipation and cooling droop

•

Built-in short cycle protection during normal operation

•

Tamper proof electronic keyboard lockout

•

Auto or manual fan operation

•

Auto or manual heat/cool changeover

•

Constant hold feature allows continuous override

• Temporary temperature override

•

Selectable 12 or 24 hour clock display

•

Selectable Fahrenheit or Celsius temperature display

•

Lockable acoess cover

•

Full function liquid crystal display (LCD}

No Auto Changeover on 200-2D4. as. 206. or 230.

Press ED

select

heat/cod/auto/off.

The word is displayed

for 5 sernnds.

(Ernertjericy heat for

35D-22-6

Select for

DDREinumis

fan or auto fan

Press ED

exit the

hold

override program.

or when programming

complete

Press to change from

Standard Time to

Daylight Saving Time

Press to set program

temperatures and

start tines

Press to hold the

Current

setting. The program

will hold indefinitely or

until RESUME is

pressed

FOR MODELS

300-224, 226, 230

Press to settle Press ED

display the

real time day.

outdoor temperah.lre

hour and minute

(optional)

To lower

lower

TO raise

tie

setpoint

the setpoint

Press and at the same time to change

FOR MODELS 300-225, 227, 229

Press to hold Hie current

setting. The p rogr-a m will

hold indefinitely or irritil

RESUME is pressed

Press to display the

oL,tdoorternperetLlre

(

Optional}

Press

ED select

heat/0

LID

urb/off.

The word is displayed

or 5 seconds.

(Emergency heat For

300-227)

Select for contirkUOLIS

r,n or auto r

PrESSo

the hold

Or override program.

or when p rogra mm ing

is complete

To lower

raise

the setpoint

the setpoi

Press and at the same time to change

THERMOSTAT LOCATION

To ensure proper operation, the thermostat should be mounted on an inside wall in a frequently

occupied area of the building. In addition, its position must be at least 18" (46 cm) from any out-

side wall, and approximately 5, (1.5 m) above the floor in a location with freely circulating air of

an average temperature.

Be sure to avoid the following locations:

•

behind doors or in corners where freely circulating air is unavailable

•

where direct sunlight or radiant heat from appliances might affect control operation

•

on an outside wall

•

adjacent to, or in line with, conditioned air discharge grilles, stairwells or outside doors

•

where its operation may be affected by steam or water pipes or warm air stacks in an adja-

cent partition, or by an unheateci/uncooled area behind the thermostat

•

where its operation will be affected by the supply air of an adjacent unit

•

near sources of electrical interference such as arcing relay contact

REMOVING THE THERMOSTAT FROM THE SUBBASE

Insert a flat blade screwdriver or ooin 1/8"

into the slot located in the bottom center of

the thermostat case and twist 1/4 turn.

lai

seeri

from

you feel or hear a click, grasp

thdesep_

the bottom two

ners an

t from

iom

tthe

the s

rne

own

dsei

hsregu

iniftehendni

force than others when separating due to

the number of terminals used.

Swing the thermostat out from the bottom.

Lift the thermostat up and off the subbase.

Place the ectangular opening in the sitbase over the equipment control wires protruding from

the wall and using the subbase as a template, mark the location of the two mounting holes

(exact vertical mounting is necessary only for appearance).

Use the supplied anchors and screws for mounting on drywall or plaster; drill two 3/16" (5mm)

diameter holes at the marked locations; use a hammer to tap the nylon anchors in flush to the wall

surface and fasten subbase using the supplied screws. {Do not over tighten])

Connect the wires from your system to the thermostat terminals as shown in the wiring diagrams.

Carefully dress the wires so that any excess is pu

-led back into the wail cavity or junction box.

Ensure that the wires are flush to the plastic subbase. The access hole should be sealed or

stuffed to prevent drafts from affecting the thermostat.

DESCRIPTION OF THE DIP SWITCH FUNCTIONS

2 Events or 4 Events Per Day (300-225, 300-227. 300-229)

Your thermostat can be set to either 2 events or 4 events per day.

2 events will allow you to program a Day

setting and a Night ( setting.

4 events will allow you to program Morning 2L, , Day

Evening

and Night ( settings.

Smart Fan

(300-225, 300-227, 300-229)

When the Smart Fan switch is in the ON position and the fan

has been energized (during

the occupied program), the thermostat will keep the fan running continuously during the occu-

pied programs and automatically cycle the fan with a call for heating or cooling during the unoc-

cupied program.

NOTE:

The unoccupied program is the Night program.

2 Minute or 4 Minute Minimum On Times

Keypad Lock

Place the switch in the locked position to lockout all buttons except the OUTDOOR button.

Plenum Fan Switch

(300-224, 300-225, 300-229)

OFF - Fan comes on immediately with heat (used on electric heat).

ON - Fan is controlled by the system (used on gas/ail heat).

Standard/Add-on Heat Pump

(300-226, 300-227)

For most heat pump applications, this switch should be left in the standard position. This will

allow the compressor and the auxiliary heat to be on simultaneously. For add-on heat pumps,

or heat pumps that require fossil fuel kits, move this switch to the add-an position. This will turn

off the compressor with a call for auxiliary heat.

Single or Multistate

(300-227, 300-229)

For equipment with a single compressor (2 heat/1 cool

for 300-227 or 1 heat/1 cool for

300-

229}, switch to single stage. For equipment with two compressors (3 heat/2 cool for 330-227 or

2 heat/2 cool for 300-229), switch to multistage.

LED #1

(300-226, 300-227, 300-229)

Switch ON will energize the LED light pipe at the top of the thermostat plus the filter indicator on

the display. This indicates the filter needs to be changed.

LED #2

(300-226, 300-227, 300-229)

Switch ON will energize the LED light pipe at the top of the thermostat plus the wrench indicator

on the display. This indicates service is

required.

FEATURES

Remote Sensor FIS1 — R52 - RS-IN

The thermostat is designed to accept the remote sensor (10-528) which will allow you to locate

your thermostat in an area away from view.

LED Auxiliary Heat Indicator

(300-226, 300-227)

Your thermostat is equipped with an LED that indicates when the system has engaged auxiliary

heat mode. It is the center (red) LED.

Add-On Heat Pumps

(300-226,

300-22 7)

Your thermostat is equipped to enhance the performance of an add-on heat pump.

In most applications, the thermostat will perform the function of a fossil fuel kit.

To select Add-On, place switch (10

for 300-226,

for 300-227)

to the ON position. The ther-

mostat will turn off the compressor with a call for AUX heat. When the switch is set to

normal, the thermostat allows the compressor and the AUX heat to be on simultaneously.

Andere Handbücher für 300-224

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Robertshaw Thermostat Handbücher

Robertshaw

Robertshaw 8625 Bedienungsanleitung

Robertshaw

Robertshaw RS4110 Bedienungsanleitung

Robertshaw

Robertshaw 9725i2 Bedienungsanleitung

Robertshaw

Robertshaw 8601 Bedienungsanleitung

Robertshaw

Robertshaw 7700 Bedienungsanleitung

Robertshaw

Robertshaw RS321P Bedienungsanleitung

Robertshaw

Robertshaw 200-403 Bedienungsanleitung

Robertshaw

Robertshaw RS9110 Bedienungsanleitung

Robertshaw

Robertshaw 9550 Bedienungsanleitung

Robertshaw

Robertshaw 9801i2 Bedienungsanleitung

Robertshaw

Robertshaw C9701i2 Bedienungsanleitung

Robertshaw

Robertshaw RS8110 Bedienungsanleitung

Robertshaw

Robertshaw 8625 Bedienungsanleitung

Robertshaw

Robertshaw 9515 Bedienungsanleitung

Robertshaw

Robertshaw RS2110C Series Bedienungsanleitung

Robertshaw

Robertshaw smart 3000 Bedienungsanleitung

Robertshaw

Robertshaw RS6110 Bedienungsanleitung

Robertshaw

Robertshaw RS456-WIFI Bedienungsanleitung

Robertshaw

Robertshaw 300-203 Bedienungsanleitung

Robertshaw

Robertshaw RS3110 Bedienungsanleitung

Robertshaw

Robertshaw RS6000 Bedienungsanleitung

Robertshaw

Robertshaw 9505 Bedienungsanleitung

Robertshaw

Robertshaw DSL-520P Handbuch

Robertshaw

Robertshaw 9400 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung