Rockwell Automation Allen-Bradley Micro800 Handbuch

Wiring Diagrams

Micro800™ 6-Channel Trimpot Analog Input

Plug-In Module

Catalog Number 2080-TRIMPOT6

http://literature.rockwellautomation.com

FR Cette publication est disponible en français sous forme électronique (fichier PDF).

Pour la télécharger, rendez-vous sur la page Internet indiquée ci-dessus.

IT Questa pubblicazione è disponibile in Italiano in formato PDF. Per scaricarla

collegarsi al sito Web indicato sopra.

DE Diese Publikation ist als PDF auf Deutsch verfügbar. Gehen Sie auf die oben

genannte Web-Adresse, um nach der Publikation zu suchen und sie

herunterzuladen.

ES Esta publicación está disponible en español como PDF. Diríjase a la dirección web

indicada arriba para buscar y descarga esta publicación.

PT Esta publicação está disponível em portugués como PDF. Vá ao endereço web que

aparece acima para encontrar e fazer download da publicação.

2Micro800™ 6-Channel Trimpot Analog Input Plug-In Module

Publication 2080-WD008A-EN-P - May 2011

Environment and Enclosure

Preventing Electrostatic Discharge

ATTENTION

This equipment is intended for use in a Pollution Degree 2 industrial

environment, in overvoltage Category II applications (as defined in IEC

60664-1), at altitudes up to 2000 m (6562 ft) without derating. This equipment

is considered Group 1, Class A industrial equipment according to IEC/CISPR

11. Without appropriate precautions, there may be difficulties with

electromagnetic compatibility in residential and other environments due to

conducted and radiated disturbances.

This equipment is supplied as open-type equipment. It must be mounted

within an enclosure that is suitably designed for those specific environmental

conditions that will be present and appropriately designed to prevent personal

injury resulting from accessibility to live parts. The enclosure must have

suitable flame-retardant properties to prevent or minimize the spread of flame,

complying with a flame spread rating of 5V A, V2, V1, V0 (or equivalent) if

non-metallic. The interior of the enclosure must be accessible only by the use

of a tool. Subsequent sections of this publication may contain additional

information regarding specific enclosure type ratings that are required to

comply with certain product safety certifications.

In addition to this publication, see:

•Industrial Automation Wiring and Grounding Guidelines, Rockwell

Automation publication 1770-4.1, for additional installation

requirements.

•NEMA Standard 250 and IEC 60529, as applicable, for explanations of

the degrees of protection provided by different types of enclosure.

ATTENTION

This equipment is sensitive to electrostatic discharge, which can cause

internal damage and affect normal operation. Follow these guidelines when

you handle this equipment:

•Touch a grounded object to discharge potential static.

•Wear an approved grounding wriststrap.

•Do not touch connectors or pins on component boards.

•Do not touch circuit components inside the equipment.

•Use a static-safe workstation, if available.

•Store the equipment in appropriate static-safe packaging when not in

use.

Micro800™ 6-Channel Trimpot Analog Input Plug-In Module 3

Publication 2080-WD008A-EN-P - May 2011

North American Hazardous Location Approval

The following modules are North American Hazardous Location approved:

2080-TRIMPOT6

The following information applies

when operating this equipment in

hazardous locations:

Informations sur l’utilisation de cet

équipement en environnements dangereux:

Products marked "CL I, DIV 2, GP A, B, C, D" are

suitable for use in Class I Division 2 Groups A,

B, C, D, Hazardous Locations and nonhazardous

locations only. Each product is supplied with

markings on the rating nameplate indicating the

hazardous location temperature code. When

combining products within a system, the most

adverse temperature code (lowest "T" number)

may be used to help determine the overall

temperature code of the system. Combinations

of equipment in your system are subject to

investigation by the local Authority Having

Jurisdiction at the time of installation.

Les produits marqués "CL I, DIV 2, GP A, B, C, D" ne

conviennent qu'à une utilisation en environnements de

Classe I Division 2 Groupes A, B, C, D dangereux et non

dangereux. Chaque produit est livré avec des marquages

sur sa plaque d'identification qui indiquent le code de

température pour les environnements dangereux.

Lorsque plusieurs produits sont combinés dans un

système, le code de température le plus défavorable

(code de température le plus faible) peut être utilisé

pour déterminer le code de température global du

système. Les combinaisons d'équipements dans le

système sont sujettes à inspection par les autorités

locales qualifiées au moment de l'installation.

WARNING

EXPLOSION HAZARD

• Do not disconnect

equipment unless power

has been removed or the

area is known to be

nonhazardous.

• Do not disconnect

connections to this

equipment unless power

has been removed or the

area is known to be

nonhazardous. Secure any

external connections that

mate to this equipment by

using screws, sliding

latches, threaded

connectors, or other means

provided with this product.

• Substitution of any

component may impair

suitability for Class I,

Division 2.

• If this product contains

batteries, they must only be

changed in an area known

to be nonhazardous.

AVERTISSEMENT

RISQUE D’EXPLOSION

• Couper le courant ou s'assurer

que l'environnement est

classé non dangereux avant de

débrancher l'équipement.

• Couper le courant ou s'assurer

que l'environnement est

classé non dangereux avant de

débrancher les connecteurs.

Fixer tous les connecteurs

externes reliés à cet

équipement à l'aide de vis,

loquets coulissants,

connecteurs filetés ou autres

moyens fournis avec ce

produit.

• La substitution de tout

composant peut rendre cet

équipement inadapté à une

utilisation en environnement

de Classe I, Division 2.

• S'assurer que l'environnement

est classé non dangereux

avant de changer les piles.

4Micro800™ 6-Channel Trimpot Analog Input Plug-In Module

Publication 2080-WD008A-EN-P - May 2011

Parts List

Your package contains one trimpot plug-in module.

WARNING

•If you insert or remove the module while power is on, an electrical arc can

occur. This could cause an explosion in hazardous location installations.

Be sure that power is removed or the area is nonhazardous before

proceeding.

•When used in a Class I, Division 2, hazardous location, this equipment must

be mounted in a suitable enclosure with proper wiring method that

complies with the governing electrical codes.

ATTENTION

•This equipment is considered Group 1, Class A industrial equipment

according to IEC/CISPR 11. Without appropriate precautions, there may be

difficulties with electromagnetic compatibility in residential and other

environments due to conducted and radiated disturbance.

•Do not insert or remove the plug-in module while power is applied,

otherwise, permanent damage to equipment may occur.

45068

Channels

012

345

Micro800™ 6-Channel Trimpot Analog Input Plug-In Module 5

Publication 2080-WD008A-EN-P - May 2011

Insert Module into Controller

Follow the instructions to insert and secure the plug-in module to the

controller.

1. Position the plug-in module with the trimpots facing the front of the

controller as shown.

2. Snap the module into any slot of the module bay.

3. Using a screwdriver, tighten the 10…12 mm (0.39…0.47 in.) M3

self-tapping screw to torque specifications.

45069

6Micro800™ 6-Channel Trimpot Analog Input Plug-In Module

Publication 2080-WD008A-EN-P - May 2011

Specifications

General

Attribute Value

Mounting torque 0.2 Nm (1.48 lb-in)

North American temp code T4

Environmental

Attribute Value

Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),

IEC 60068-2-2 (Test Bd, Operating Dry Heat),

IEC 60068-2-14 (Test Nb, Operating Thermal Shock):

-20…65 °C (-4…149 °F)

Temperature, surrounding

air, max 65 °C (149 °F)

Temperature, non-operating IEC 60068-2-1 (Test Ab, Unpackaged Non-operating Cold),

IEC 60068-2-2 (Test Bb, Unpackaged Non-operating Dry Heat),

IEC 60068-2-14 (Test Na, Unpackaged Non-operating Thermal Shock):

-40…85 °C (-40…185 °F)

Micro800™ 6-Channel Trimpot Analog Input Plug-In Module 7

Publication 2080-WD008A-EN-P - May 2011

Certifications

Certification (when

product is marked)(1)

(1) See the Product Certification link at http://www.ab.com for Declaration of Conformity, Certificates,

and other certification details.

Value

c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See

UL File E322657

UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations,

certified for U.S. and Canada. See UL File E334470.

CE European Union 2004/108/EC EMC Directive, compliant with:

EN 61000-6-2; Industrial Immunity

EN 61000-6-4; Industrial Emissions

EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)

EN 61131-2; Programmable Controllers (Clause 11)

C-Tick Australian Radiocommunications Act, compliant with:

AS/NZS CISPR 11; Industrial Emissions

Rockwell Automation Support

Rockwell Automation provides technical information on the Web to assist you in using

its products. At http://support.rockwellautomation.com, you can find technical

manuals, a knowledge base of FAQs, technical and application notes, sample code and

links to software service packs, and a MySupport feature that you can customize to

make the best use of these tools.

For an additional level of technical phone support for installation, configuration, and

troubleshooting, we offer TechConnect support programs. For more information,

contact your local distributor or Rockwell Automation representative, or visit

http://support.rockwellautomation.com.

Installation Assistance

If you experience a problem within the first 24 hours of installation, please review the

information that's contained in this manual. You can also contact a special Customer

Support number for initial help in getting your product up and running.

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational

when shipped from the manufacturing facility. However, if your product is not

functioning and needs to be returned, follow these procedures.

Allen-Bradley, Rockwell Automation, Micro800, and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

United States 1.440.646.3434

Monday – Friday, 8 a.m. – 5 p.m. EST

Outside United States Please contact your local Rockwell Automation representative for any

technical support issues.

United States Contact your distributor. You must provide a Customer Support case number

(see phone number above to obtain one) to your distributor in order to

complete the return process.

Outside United States Please contact your local Rockwell Automation representative for the return

procedure.

Publication 2080-WD008A-EN-P - May 2011 PN 953203-35(01)

Andere Handbücher für Allen-Bradley Micro800

Inhaltsverzeichnis

Andere Rockwell Automation E/A-System Handbücher

Rockwell Automation

Rockwell Automation Allen-Bradley C Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1769-ASCII Bedienungsanleitung

Rockwell Automation

Rockwell Automation Trusted TMR 24 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley GuardPLC 1753-IB20XOB8 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1794-IB16D Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley FLEX 5000 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Micro800 Handbuch

Rockwell Automation

Rockwell Automation Allen-Bradley IF2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley B Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1790D-N4CO Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1769-IF4 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SLC 500 BASIC Bedienungsanleitung

Rockwell Automation

Rockwell Automation Trusted TMR Bedienungsanleitung

Rockwell Automation

Rockwell Automation Trusted T8424 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Trusted TMR 120 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Micro800 Handbuch

Rockwell Automation

Rockwell Automation ICSTT-RM280N-EN-P Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley POINT I/O C Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation FLEX 1794-TB2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation ArmorBlock Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation micrologix 1200 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1715-AENTR Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley DeviceNet Base RTD Bedienungsanleitung

Rockwell Automation

Rockwell Automation Series C Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung