Rockwell Automation Allen-Bradley Micro800 Bedienungsanleitung

Installation Instructions

Micro800™ Programmable Controller External

AC Power Supply

Catalog Number(s) 2080-PS120-240VAC

http://literature.rockwellautomation.com/idc/groups/literature/documents/in/2080-

in001_-mu-p.pdf

FR Cette publication est disponible en

français sous forme électronique (fichier

PDF). Pour la télécharger, rendez-vous sur

la page Internet indiquée ci-dessus.

PT Esta publicação está disponível em portugués

como PDF. Vá ao endereço web que aparece

acima para encontrar e fazer download da

publicação.

IT Questa pubblicazione è disponibile in

Italiano in formato PDF. Per scaricarla

collegarsi al sito Web indicato sopra. ZH

Diese Publikation ist als PDF auf Deutsch

verfügbar. Gehen Sie auf die oben

genannte Web-Adresse, um nach der

Publikation zu suchen und sie

herunterzuladen.

Esta publicación está disponible en

español como PDF. Diríjase a la dirección

web indicada arriba para buscar y

descarga esta publicación. KO

Table of Contents

Topic Page

Important User Information 2

Overview 7

Connect the Power Supply 8

Wire the Module 10

Specifications 10

2Micro800™ Programmable Controller External AC Power Supply

Publication 2080-IN001A-EN-P - September 2010

Important User Information

Solid state equipment has operational characteristics differing from those of electromechanical

equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls

(Publication SGI-1.1 available from your local Rockwell Automation sales office or online at

http://literature.rockwellautomation.com) describes some important differences between solid state

equipment and hard-wired electromechanical devices. Because of this difference, and also because of

the wide variety of uses for solid state equipment, all persons responsible for applying this equipment

must satisfy themselves that each intended application of this equipment is acceptable.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages

resulting from the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the

many variables and requirements associated with any particular installation, Rockwell Automation, Inc.

cannot assume responsibility or liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits,

equipment, or software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell

Automation, Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

WARNING

Identifies information about practices or circumstances that can cause an explosion

in a hazardous environment, which may lead to personal injury or death, property

damage, or economic loss.

IMPORTANT

Identifies information that is critical for successful application and understanding of

the product.

ATTENTION

Identifies information about practices or circumstances that can lead to personal

injury or death, property damage, or economic loss. Attentions help you identify a

hazard, avoid a hazard and recognize the consequences.

SHOCK HAZARD

Labels may be on or inside the equipment (for example, drive or motor) to alert

people that dangerous voltage may be present.

BURN HAZARD

Labels may be on or inside the equipment (for example, drive or motor) to alert

people that surfaces may reach dangerous temperatures.

Micro800™ Programmable Controller External AC Power Supply 3

Publication 2080-IN001A-EN-P - September 2010

Environment and Enclosure

ATTENTION

This equipment is intended for use in a Pollution Degree 2 industrial

environment, in overvoltage Category II applications (as defined in IEC

60664-1), at altitudes up to 2000 m (6562 ft) without derating.

This equipment is considered Group 1, Class A industrial equipment according

to IEC/CISPR 11. Without appropriate precautions, there may be difficulties

with electromagnetic compatibility in residential and other environments due

to conducted and radiated disturbances.

This equipment is supplied as open-type equipment. It must be mounted

within an enclosure that is suitably designed for those specific environmental

conditions that will be present and appropriately designed to prevent

personal injury resulting from accessibility to live parts. The enclosure must

have suitable flame-retardant properties to prevent or minimize the spread of

flame, complying with a flame spread rating of 5V A, V2, V1, V0 (or equivalent)

if non-metallic. The interior of the enclosure must be accessible only by the

use of a tool. The enclosure must have provision for supply connections to

Class I, Division 2 wiring system in accordance with the National Electric

Code. Subsequent sections of this publication may contain additional

information regarding specific enclosure type ratings that are required to

comply with certain product safety certifications.

In addition to this publication, see:

•Industrial Automation Wiring and Grounding Guidelines, Rockwell

Automation publication 1770-4.1, for additional installation

requirements.

•NEMA Standard 250 and IEC 60529, as applicable, for explanations of the

degrees of protection provided by different types of enclosure.

4Micro800™ Programmable Controller External AC Power Supply

Publication 2080-IN001A-EN-P - September 2010

Preventing Electrostatic Discharge

ATTENTION

This equipment is sensitive to electrostatic discharge, which can cause

internal damage and affect normal operation. Follow these guidelines when

you handle this equipment:

•Touch a grounded object to discharge potential static.

•Wear an approved grounding wriststrap.

•Do not touch connectors or pins on component boards.

•Do not touch circuit components inside the equipment.

•Use a static-safe workstation, if available.

•Store the equipment in appropriate static-safe packaging when not in use.

Micro800™ Programmable Controller External AC Power Supply 5

Publication 2080-IN001A-EN-P - September 2010

North American Hazardous Location Approval

The following modules are North American Hazardous Location approved:

2080-PS120-240VAC

The following information applies when operating

this equipment in hazardous locations: Informations sur l’utilisation de cet équipement en

environnements dangereux:

Products marked "CL I, DIV 2, GP A, B, C, D" are

suitable for use in Class I Division 2 Groups A, B,

C, D, Hazardous Locations and nonhazardous

locations only. Each product is supplied with

markings on the rating nameplate indicating the

hazardous location temperature code. When

combining products within a system, the most

adverse temperature code (lowest "T" number)

may be used to help determine the overall

temperature code of the system. Combinations of

equipment in your system are subject to

investigation by the local Authority Having

Jurisdiction at the time of installation.

Les produits marqués "CL I, DIV 2, GP A, B, C, D" ne

conviennent qu'à une utilisation en environnements

de Classe I Division 2 Groupes A, B, C, D dangereux et

non dangereux. Chaque produit est livré avec des

marquages sur sa plaque d'identification qui indiquent

le code de température pour les environnements

dangereux. Lorsque plusieurs produits sont combinés

dans un système, le code de température le plus

défavorable (code de température le plus faible) peut

être utilisé pour déterminer le code de température

global du système. Les combinaisons d'équipements

dans le système sont sujettes à inspection par les

autorités locales qualifiées au moment de

l'installation.

WARNING

EXPLOSION HAZARD

• Do not disconnect equipment

unless power has been removed

or the area is known to be

nonhazardous.

• Do not disconnect connections to

this equipment unless power has

been removed or the area is

known to be nonhazardous.

Secure any external connections

that mate to this equipment by

using screws, sliding latches,

threaded connectors, or other

means provided with this product.

• Substitution of any component

may impair suitability for Class I,

Division 2.

• If this product contains batteries,

they must only be changed in an

area known to be nonhazardous.

AVERTISSEMENT

RISQUE D’EXPLOSION

• Couper le courant ou s'assurer

que l'environnement est classé

non dangereux avant de

débrancher l'équipement.

• Couper le courant ou s'assurer

que l'environnement est classé

non dangereux avant de

débrancher les connecteurs.

Fixer tous les connecteurs

externes reliés à cet

équipement à l'aide de vis,

loquets coulissants,

connecteurs filetés ou autres

moyens fournis avec ce produit.

• La substitution de tout

composant peut rendre cet

équipement inadapté à une

utilisation en environnement de

Classe I, Division 2.

• S'assurer que l'environnement

est classé non dangereux avant

de changer les piles.

6Micro800™ Programmable Controller External AC Power Supply

Publication 2080-IN001A-EN-P - September 2010

WARNING

• When used in a Class I, Division 2, hazardous location, this equipment

must be mounted in a suitable enclosure with proper wiring method

that complies with the governing electrical codes.

• Any fluctuation in voltage source must be within 85V…264V.

Do not connect the adapter to a power source that has fluctuations

outside of this range.

ATTENTION

• Be careful when stripping wires. Wire fragments that fall into the

controller could cause damage. Once wiring is complete, be sure the

module is free of all metal fragments before removing the protective

debris strip. Failure to remove the strip before operating can cause

overheating.

• Be careful of metal chips when drilling mounting holes for your

controller or other equipment within the enclosure or panel. Drilled

fragments that fall into the controller could cause damage. Do not drill

holes above a mounted controller if the protective debris strips have

been removed.

• Electrostatic discharge can damage semiconductor devices inside the

adapter. Do not touch the connector pins or other sensitive areas.

• Mount the power supply vertically.

Allow 50 mm (2 in.) of space on all but the right side for adequate

ventilation.

• Do not wire more than 2 conductors on any single terminal.

Micro800™ Programmable Controller External AC Power Supply 7

Publication 2080-IN001A-EN-P - September 2010

Additional Resources

If you would like a manual, you can:

•download a free electronic version from the internet:

http://literature.rockwellautomation.com

•purchase a printed manual by contacting your local Allen-Bradley

distributor or Rockwell Automation representative

Overview

The 2080-PS120-240VAC adapter can be used by controllers from the

Micro800 family as an optional AC power source.

Resource Description

Micro810™ LC10 Programmable Controllers

User Manual, publication 2080-UM001 A more detailed description of how to install and use

your Micro810 LC10 programmable controller and

expansion I/O system.

Micro830™ LC30 Programmable Controllers

User Manual, publication 2080-UM002 A more detailed description of how to install and use

your Micro830 LC30 programmable controller and

expansion I/O system.

Industrial Automation Wiring and

Grounding Guidelines, publication 1770-4.1 More information on proper wiring and grounding

techniques.

45060

8Micro800™ Programmable Controller External AC Power Supply

Publication 2080-IN001A-EN-P - September 2010

Connect the Power Supply

General Considerations

Most applications require installation in an industrial enclosure to reduce the

effects of electrical interference and environmental exposure. Locate your

module as far as possible from power lines, load lines, and other sources of

electrical noise such as hard-contact switches, relays, and AC motor drives.

For more information on proper grounding guidelines, see the Industrial

Automation Wiring and Grounding Guidelines, publication 1770-4.1.

Module Spacing

Maintain spacing from objects such as enclosure walls, wireways and adjacent

equipment. Allow 50.8 mm (2 in.) of space on all sides for adequate

ventilation. An exception to this spacing guideline is allowed for the side at

which you are connecting a Micro800 controller.

45063

Micro800™ Programmable Controller External AC Power Supply 9

Publication 2080-IN001A-EN-P - September 2010

DIN Rail Mounting

Use a flat-blade screwdriver to mount the power supply on EN50022-35x7.5

DIN rails.

Panel Mounting

The preferred mounting method is to use four M4 (#8) screws per module.

Hole spacing tolerance: ±0.4 mm (0.016 in.).

Follow these steps to install the power supply using mounting screws.

1. Place the power supply against the panel where you are mounting it.

Make sure the power supply is spaced properly.

2. Mark drilling holes through the mounting screw holes and mounting

feet then remove the power supply.

3. Drill the holes at the markings, then replace the power supply and

mount it.

Leave the protective debris strip in place until you are finished wiring

the power supply and any other devices.

10 Micro800™ Programmable Controller External AC Power Supply

Publication 2080-IN001A-EN-P - September 2010

Wire the Module

Specifications

General

Attribute Value

Dimensions, HxWxD 90 x 45 x 80 mm (3.55 x 1.78 x 3.15 in)

Shipping weight 0.34 kg (0.75 lb)

Supply voltage

range(1) 100V…120V AC, 1A

200…240V AC, 0.5A

Supply frequency 47…63 Hz

Supply power 24V DC, 1.6 A

Inrush current, max 24A @ 132V for 10 ms

40A @ 263V for 10 ms

PAC-1 PAC-2 PAC-3

DC-1 DC-2 DC-3 DC-4

AC Input Connectors DC Output Connectors (DC 24V/ 1.6 A)

PAC-1 AC hot 100…240V AC DC-1 +

PAC-2 AC neutral 100…240V AC DC-2 +

PAC-3 Safety ground DC-3 -

DC-4 -

45061

45062

Andere Handbücher für Allen-Bradley Micro800

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Stromversorgung Handbücher

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE120EL Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE120F Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLB90EH SER B Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE480EP Bedienungsanleitung

Rockwell Automation

Rockwell Automation SA500 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLB120E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley B Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE240EC Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XL Betriebsanleitung

Rockwell Automation

Rockwell Automation 1606-XLEDNET3 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE120EC Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS960EE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 193-DNENCAT Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS120E Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS180B Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE480ERL Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE120F Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE260F Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLE96B-2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLE96B-2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLE Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS480 Bedienungsanleitung

Rockwell Automation

Rockwell Automation SD3100 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley ControlLogix 1756-L Series Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung