Rockwell Automation Allen-Bradley 1606-XLB120E Bedienungsanleitung

Basic Power Supply 5 A

Catalog Number 1606-XLB120E

Reference Manual

Original Instructions

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to

familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,

and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are

required to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may

be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from

the use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,

Inc., is prohibited

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

WARNING: Identifies information about practices or circu mstances that can cause an explosion in a hazardous

environment, which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circu mstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication 1606-RM055B-EN-P - February 2017 3

Basic Power Supply 5 A

Table of Contents

Summary of Changes This manual contains new and updated information as indicated in the

following table.

Additional Resources These documents contain additional information concerning related products

from Rockwell Automation.

You can view or download publications at

http://www.rockwellautomation.com/global/literature-library/overview.page.

To order paper copies of technical documentation, contact your local

Allen-Bradley distributor or Rockwell Automation sales representative.

Topic Page Topic Page

Additional Resources 3 Hold-up Time 11

Terminology and Abbreviations 4 DC OK Relay Contact 11

Product Overview 5 Efficiency and Power Loss 12

Front Side and User Elements 6 Lifetime Expectancy and Mean Time between

Failure (MTBF)

Protection Features 6 Functional Diagram 13

Safety Features 7 EMC 14

Installation Notes 7 Application Notes 15

Terminals and Wiring 7 Specifications 19

Installation Notes 7 Environment 20

Input 8 Dielectric Strength 21

DC-Input 9 Standards Compliance and Certifications 22

Input Inrush Current 9 Approximate Dimensions and Weight 23

Output 10

Topic Page

Corrected dimension information 23

Resource Description

Switched Mode Power Supply Technical Data, publication

1606-TD002

Provides specifications and approximate dimensions

for full line of switched mode power supplies.

Industrial Automation Wiring and Grounding Guidelines,

publication 1770-4.1

Provides general guidelines for installing a Rockwell

Automation® industrial system.

Product Certifications website, http://

www.rockwellautomation.com/global/certification/

overview.page

Provides declarations of conformity, certificates, and

other certification details.

4Rockwell Automation Publication 1606-RM055B-EN-P - February 2017

Basic Power Supply 5 A

Terminology and

Abbreviations Term Definition

230V AC A figure with the unit (V AC) at the end is a momentary figure without any additional

tolerances included.

50 Hz vs. 60 Hz As long as not otherwise stated, AC 100V and AC 230V parameters are valid at 50 Hz

mains frequency. AC 120V parameters are valid for 60 Hz mains frequency.

AC 230V A figure that is displayed with the AC or DC before the value represents a nominal

voltage with standard tolerances included. For example: DC 12V describes a 12V battery,

whether it is full (13.7V) or flat (10V)

Earth, Ground This document uses the term “earth” which is the same as the U.S. term “ground”.

PE and symbol PE is the abbreviation for Protective Earth and has the same meaning as the symbol.

PELV Protection by extra-low voltage

SELV Safety by extra-low voltage

Rockwell Automation Publication 1606-RM055B-EN-P - February 2017 5

Basic Power Supply 5 A

Product Overview 1606-XLB Basic Power Supplies are

compact, industrial grade power supplies that

focus on the essential features needed in

industrial applications.

The housing is made of a high-grade,

reinforced molded material, which permits

the units to be used in ambient temperatures

up to 70 °C (158 °F).

This power supply features a wide input

voltage range, which makes it suitable for

global use.

The addition of a DC-OK signal makes the

power supply ideal for many industry

applications such as: process, automation,

and many other critical applications where

preventive function monitoring can help to

avoid long downtimes.

The 1606-XLB120E power supply offers these features:

• 100…120V/200…240V AC auto-select input

• Cost that is optimized without compromising the quality or reliability

• Small width of 39 mm (1.54 in.) takes up less space on the DIN rail

• Efficiency up to 92.3%

• Full power between -10…+55 °C (14…131 °F)

• DC-OK relay contact included

•1-yearwarranty

6Rockwell Automation Publication 1606-RM055B-EN-P - February 2017

Basic Power Supply 5 A

Front Side and User Elements

Figure 1 - Front Side of DC-UPS

Protection Features

Letter Description

AInput terminals - (screw terminals)

N, L - Line input

PE - Protective earth input

BOutput terminals - (screw terminals, two pins per pole)

+ Positive output

– Negative (return) output

COutput voltage potentiometer -

Guaranteed adjustment range: 24…28V

Factory set: 24.1V

DDC-OK status indicator- (green) On, when the output voltage is >18V

EDC-OK Relay Contact (push-in terminals)

Attribute 1606-XLB120E

Output protection Electronically protected against overload, no-load, and short circuits

Output overvoltage protection typ 31V DC

max 34V DC

In case of an internal power supply anomaly, a redundant

circuit limits the maximum output voltage. In such a

case, the output shuts down and stays down until the

input voltage is turned off and on again for at least 1

minute or until the green status indicator went off.

Degree of protection IP 20 EN/IEC 60529 Caution: For use in a controlled

environment according to CSA 22.2 No 107.1-01.

Over-temperature protection no

Input transient protection MOV (Metal Oxide Varistor)

Internal input fuse Included Not user replaceable

Rockwell Automation Publication 1606-RM055B-EN-P - February 2017 7

Basic Power Supply 5 A

Safety Features

Installation Notes • Use appropriate copper cables that are designed for minimum operating

temperatures of:

– 75 °C (167 °F) for ambient up to 55 °C (131 °F) minimum.

– 90 °C (194 °F) for ambient up to 70 °C (158 °F) minimum.

• Follow national installation codes and installation regulations

• Verify that all strands of a stranded wire enter the terminal connection.

• Do not use the power supply without a PE connection.

• Secure unused terminal compartments tightly.

• Ferrules are allowed.

Terminals and Wiring The terminals are IP20 Fingersafe constructed and suitable for field- and

factory wiring.

Attribute 1606-XLB120E

Input/output separation

double or reinforced insulation

SELV IEC/EN 60950-1

PELV IEC/EN 60204-1, EN 50178, IEC 62103, IEC 60364-4-41

Class of protection I PE (Protective Earth) connection required

Isolation resistance > 100 MOhm Input to output, 500V DC

Touch current

(leakage current)

typ 0.21 mA/0.46 mA 100V AC, 50 Hz, TN-,TT-mains/IT-mains

typ 0.30 mA/0.65 mA 120V AC, 60 Hz, TN-,TT-mains/IT-mains

typ 0.33 mA/0.72 mA 230V AC, 50 Hz, TN-,TT-mains/IT-mains

< 0.27 mA/0.56 mA 110V AC, 50 Hz, TN-,TT-mains/IT-mains

< 0.38 mA/0.78 mA 132V AC, 60 Hz, TN-,TT-mains/IT-mains

< 0.43 mA/0.90 mA 264V AC, 50 Hz, TN-,TT-mains/IT-mains

Attribute Input and Output Terminals DC-OK Signal Terminal

Terminal type Screw terminals Push-in terminals

Solid wire, max 6 mm21.5 mm2

Stranded wire, max 4 mm21.5 mm2

American Wire Gauge AWG 20-10 AWG 28-16

Wire diameter, max including ferrules) 2.8 mm (0.11 in.) 1.6 mm (0.06 in.)

Wire stripping length 7 mm (0.28 in.) 7 mm (0.28 in.)

Screwdriver 3.5 mm (0.14 in.)

slotted or cross-head No 2

Not required

Recommended tightening torque 1 N•m (9 lb•in) Not applicable

8Rockwell Automation Publication 1606-RM055B-EN-P - February 2017

Basic Power Supply 5 A

Input

Attribute 1606-XLB120E

AC input nom 100…120V/200…240V AC Auto-select, suitable for TN-, TT- and IT mains networks

AC input range min 90…132V AC/180…264V AC continuous operation

min 264…300V AC < 500 ms

Allowed voltage L or N to earth max 300V AC continuous, IEC 62103

Input frequency nom 50…60 Hz ±6%

External input protection See recommendations in External Input Protection on page 16

Attribute AC 100V AC 120V AC 230V

Input current typ 2.0 A 1.72 A 1.05 A at 24V, 5 A, see Figure 3

Power factor(1) typ 0.66 0.64 0.54 at 24V, 5 A, see Figure 5

Crest factor(2) typ 2.7 2.8 3.4 at 24V, 5 A

Turn-on voltage typ 78V AC 78V AC 157V AC at 24V 0 A, steady-state value, see Figure 2

Shut-down voltage typ 68V AC 68V AC 68V AC at 24V 5 A, steady-state value, see Figure 2

Start-up delay typ 400 ms 400 ms 100 ms see Figure 4

Rise time typ 30 ms 30 ms 30 ms at 24V, 5 A const. current load, 0mF load capacitance, see Figure 4

typ 90 ms 90 ms 90 ms at 24V, 5 A const. current load, 5mF load capacitance, see Figure 4

Turn-on overshoot max 200 mV 200 mV 200 mV see Figure 4

(1) The power factor is the ratio of the true (or real) power to the apparent power in an AC circuit.

(2) The crest factor is the mathematical ratio of the peak value to the T ms value of the input current waveform.

Figure 2 - Input Voltage Range, typ Figure 4 - Turn-on Behavior, Definitions

Figure 3 - Input Current vs. Output Load at 24V Figure 5 - Power Factor vs. Output Load

Turn-on

Rated input ranges

OUT

264180

Shut-down

132

Upper

range

Lower

range

300Vac

max.

500ms

Start-up

delay Rise

Time

Overshoot

- 5%

Output

Voltage

Input

Voltage

0.5 1 1.5 2 2.5 3 3.5 4 4.5

0.3

0.6

0.9

1.2

1.5

1.8

2.2A

Input Current, typ.

Output Current

a) 100Vac

b) 120Vac

c) 230Vac

Power Factor, typ.

0.5 1 1.5 2 2.5 3 3.5 4 4.5 5A

0.45

0.50

0.55

0.60

0.65

0.70

Output Current

a) 100Vac

b) 120Vac

c) 230Vac b

Rockwell Automation Publication 1606-RM055B-EN-P - February 2017 9

Basic Power Supply 5 A

DC-Input Do not operate the power supply with DC-input voltage.

Input Inrush Current A NTC inrush limiter limits the input inrush current after turn-on of the

input voltage.

Attribute AC 100V AC 120V AC 230V Notes

Inrush

current

max 23 A peak 27 A peak 40 A peak 40 °C (104 °F) ambient, cold start

typ 18 A peak 22 A peak 33 A peak

Inrush

energy

typ 13 A peak 16 A peak 30 A peak 25 °C (77 °F) ambient, cold start

max 0.4 A2s0.5A

2s1.5A

2s 40 °C (104 °F) ambient, cold start

Figure 6 - Input Inrush Current, Typical Behavior,

230V AC Input, 24V 5 A Output, 40 °C (104 °F) Ambient

Figure 7 - Input Inrush Current, Zoom Into First Peak

230V AC Input, 24V 5 A Output, 40 °C (104 °F) Ambient

20ms/DIV

Input current 20A/DIV

Input voltage 500V/DIV

Output voltage 20V/DIV

1ms/DIV

Ipeak = 33A

Input current 10A/DIV

10 Rockwell Automation Publication 1606-RM055B-EN-P - February 2017

Basic Power Supply 5 A

Output

Attribute 1606-XLB120E Notes

Output voltage nom DC 24V

Adjustment range min 24…28V guaranteed

max 30V(1) at clockwise end position of potentiometer

Factory settings typ 24.1V ±0.2 %, at full load, cold unit

Line regulation max 10 mV 90…132/180…264V AC

Load regulation max 150 mV static value, 0 A .. 5 A .. 0 A

Ripple and noise

voltage

max 100 mVpp 20 Hz to 20 MHz, 50 Ohms

Output current for AC 110…120/220…240V mains voltages (includes AC 208V mains):

nom 5 A at 24V, below 55 °C (122 °F) ambient temperature

4.3 A at 28V, below 55 °C (122 °F) ambient temperature

3.1 A at 24V, at 70 °C (158 °F) ambient temperature

2.7 A at 28V, at 70 °C (158 °F) ambient temperature

Derate linearly between +55 °C (122 °F) and +70 °C (158 °F)

for AC 100/200V mains voltages:

nom 5 A at 24V, below 55 °C (122 °F) ambient temperature

4.3 A at 28V, below 55 °C (122 °F) ambient temperature

2.5 A at 24V, at 70 °C (158 °F) ambient temperature

2.1 A at 28V, at 70 °C (158 °F) ambient temperature

Derate linearly 50 …70 °C (122…158 °F)

Overload behavior continuous current output voltage > 10V DC, see Figure 8

Intermittent output voltage < 10V DC, see Figure 8

Short Circuit current typ 3.5 A(2) average (R.M.S.) current, load impedance 50mOhm

Output capacitance typ 2 050 μF included inside the power supply

(1) This is the maximum output voltage that can occur at the clockwise end position of the potentiometer due to tolerances. It is not

guaranteed value that can be achieved. The typical value is about 28.5V.

(2) Discharge current of output capacitors is not included.

Figure 8 - Output Voltage vs. Output Current, R ms current, typ Figure 9 - Intermittent Operation at Shorted Output, typ

Output Voltage

024

28V

10A53167

intermittent

operation

8 9

continuous

current

Adjustment

Range

Output Current

A...132/264Vac

B...85/187Vac

60ms

360ms

9.2A

Inhaltsverzeichnis

Andere Rockwell Automation Stromversorgung Handbücher

Rockwell Automation

Rockwell Automation 1606-XLE96B-2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLP60BQ Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE480EP Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS180B Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE480ERZ Bedienungsanleitung

Rockwell Automation

Rockwell Automation SD3100 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE480ERL Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE240E-3 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS180B Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLB90EH SER B Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE240EL Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-xlp15 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLE240EP Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLB90EQ Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLE96B-2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE240ERL SER B Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLEDNET3 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE192BDM Bedienungsanleitung

Rockwell Automation

Rockwell Automation A-B QUALITY 1606-XLS120EA Bedienungsanleitung

Rockwell Automation

Rockwell Automation Trusted T8220 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLB90E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex SCR Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLS960F Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLE120F Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung