Roland SJ-740 Bedienungsanleitung

Thank you very much for purchasing the product.

• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read

through this manual completely and store it in a safe location.

• Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.

• The contents of this operation manual and the specifications of this product are subject to change without notice.

• The operation manual and the product have been prepared and tested as much as possible. If you find any

misprint or error, please inform us.

• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through

use of this product, regardless of any failure to perform on the part of this product.

• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with

respect to any article made using this product.

USER’S MANUAL

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE

STATEMENT

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated

in a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference

to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Unauthorized changes or modification to this system can void

the users authority to operate this equipment.

The I/O cables between this equipment and the computing

device must be shielded.

For Canada

CLASS A NOTICE

This Class A digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

CLASSE A AVIS

Cet appareil numérique de la classeA respecte toutes les

exigences du Règlement sur le matériel brouilleur du

Canada.

ROLAND DG CORPORATION

1-6-4 Shinmiyakoda, Hamamatsu-shi, Shizuoka-ken, JAPAN 431-2103

MODEL NAME : See the MODEL given on the rating plate.

RELEVANT DIRECTIVE : EC LOW VOLTAGE DIRECTIVE (73/23/EEC)

EC ELECTROMAGNETIC COMPATIBILITY DIRECTIVE (89/336/EEC)

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

NOTICE Grounding Instructions

Do not modify the plug provided - if it will not fit the outlet,

have the proper outlet installed by a qualified electrician.

Check with qualified electrician or service personnel if the

grounding instructions are not completely understood, or if in

doubt as to whether the tool is properly grounded.

Use only 3-wire extension cords that have 3-prong

grounding plugs and 3-pole receptacles that accept the tool’s

plug.

Repair or replace damaged or worn out cord immediately.

Contents

Contents ...........................................................................................................................1

Features of the SJ-740/640/540.......................................................................................4

To Ensure Safe Use ......................................................................................................... 5

About the Labels Affixed to the Unit .............................................................................................................. 9

Pour utiliser en toute sécurité ......................................................................................10

À propos des étiquettes collées sur l'appareil............................................................................................. 14

1. Getting Started ........................................................................................................... 15

1-1 Checking Accessories ........................................................................................................................... 16

1-2 Part Names ........................................................................................................................................... 17

1-3 Assembling and Installing...................................................................................................................... 19

Installation Environment .......................................................................................................................................................... 19

Step 1: Assemble the Stand ...................................................................................................................................................... 20

Step 2: Install the Included Items ............................................................................................................................................. 22

Step 3: Install the Drain Bottle ................................................................................................................................................. 23

Step 4: Remove the Protective Media ...................................................................................................................................... 25

1-4 Connecting the Cables.......................................................................................................................... 26

Connecting the Power Cord...................................................................................................................................................... 26

Connecting to the Computer ..................................................................................................................................................... 27

1-5 Switching On the Power for the First Time ........................................................................................... 29

Step 1: Install Ink Cartridges .................................................................................................................................................... 29

2. Basic Operation ......................................................................................................... 31

2-1 Switching the Power On and Off........................................................................................................... 32

Switching On the Power ........................................................................................................................................................... 32

Switching Off the Power at the End of the Day....................................................................................................................... 33

2-2 Loading Media....................................................................................................................................... 34

Loading Roll Media .................................................................................................................................................................. 34

Loading Sheet Media ................................................................................................................................................................ 37

When Loading Thick Media ..................................................................................................................................................... 38

When Loading Media That Warps Easily ................................................................................................................................ 39

Separating the Media ................................................................................................................................................................ 40

Removing the Media ................................................................................................................................................................. 40

2-3 Printing .................................................................................................................................................. 41

To Perform Printing .................................................................................................................................................................. 41

Performing a Printing Test ........................................................................................................................................................ 42

Downloading Printing Data ...................................................................................................................................................... 42

3. A Wide Variety of Operations.................................................................................... 43

3-1 Replacing the Ink Cartridges................................................................................................................. 44

Care and Handling of Ink Cartridges ....................................................................................................................................... 44

Replacing with New Ink Cartridges ......................................................................................................................................... 45

If Ink Runs Out During Printing............................................................................................................................................... 46

3-2 Checking the Remaining Ink Level ....................................................................................................... 47

3-3 Setting the Location Where Printing Starts........................................................................................... 48

Setting the Start Location ......................................................................................................................................................... 48

Specifying a Location in the Feed Direction ........................................................................................................................... 49

Specifying a Location in the Scan Direction ........................................................................................................................... 50

3-4 Setting the Margins ............................................................................................................................... 51

Setting the Margins in the Feed Direction ............................................................................................................................... 51

Setting the Margins in the Scan Direction ............................................................................................................................... 52

3-5 Using Transparent Media ...................................................................................................................... 54

3-6 Making Corrections for Printing............................................................................................................. 55

Feed Correction......................................................................................................................................................................... 55

Bidirectional Correction ........................................................................................................................................................... 56

3-7 Stopping Printing Operations ................................................................................................................ 59

Stopping Printing Operations ................................................................................................................................................... 59

Pausing Printing Operations ..................................................................................................................................................... 59

3-8 When Not in Use for a Prolonged Period.............................................................................................. 60

4. Maintenance ............................................................................................................... 61

4-1 Cleaning the Printing Heads ................................................................................................................. 62

Cleaning the Printing Heads ..................................................................................................................................................... 62

If Drop-out Persists Even After Carrying Out Cleaning Several Times ................................................................................. 63

If Performing POWERFUL Cleaning Several Times Does Not Correct the Drop-out Problem ........................................... 63

4-2 Cleaning Using the Cleaning Kit ........................................................................................................... 64

4-3 Replacing the Wiper.............................................................................................................................. 67

4-4 Other Cleaning Tasks............................................................................................................................ 68

4-5 Disposing of Discharged Ink ................................................................................................................. 69

4-6 How to Replace the Separating Knife................................................................................................... 70

4-7 When Moving the Unit........................................................................................................................... 71

5. Menus and Keys......................................................................................................... 73

5-1 Display Menus Flowchart ...................................................................................................................... 74

5-2 Description of Menus ............................................................................................................................ 78

5-3 Description of Keys ............................................................................................................................... 81

Contents

SOLJETTM and SOL INKTM are trademarks of Roland DG Corporation.

Other company names and product name are trademarks or registered trademarks of their respective holders.

http://www.rolanddg.com/

Contents

6. What to Do If............................................................................................................... 83

6-1 What to Do If... ...................................................................................................................................... 84

The Machine Doesn't Run ........................................................................................................................................................ 84

Clean, Attractive Printing Is Impossible .................................................................................................................................. 85

The Media Becomes Jammed ................................................................................................................................................... 88

What to Do If the Printing Carriage Does Not Operate........................................................................................................... 89

6-2 What to Do If an Error Message Appears ............................................................................................. 91

7. Appendix.....................................................................................................................93

7-1 Specifications ........................................................................................................................................ 94

Main Unit Specification............................................................................................................................................................ 94

Interface Specifications ............................................................................................................................................................ 95

Network Interface Specifications ............................................................................................................................................. 95

7-2 Media Conditions................................................................................................................................... 96

Usable Media ............................................................................................................................................................................ 96

Loadable Media Widths ............................................................................................................................................................ 96

7-3 Printing Area.......................................................................................................................................... 97

7-4 The Media-cutoff Location During Continuous Printing ........................................................................98

Features of the SJ-740/640/540

What Is the SJ-740/640/540?

The SJ-740/640/540 is a large-format printer combining high speed with high print quality. It can by loaded with many

different types of media. It also achieves better weatherability through the use of SOL INK.

Built-in Print Server

This machine has a built-in print server (Roland-PrintServer) as a network interface. When you use the print server, you

can send printing data to the machine from anywhere on the network.

Includes a Software Raster Image Processor (RIP)

Software RIP, which is included with the machine, lets you use your computer to perform raster image processing for

printing data such as PostScript files exported from a program and output the data to the machine.

To Ensure Safe Use

Used for instructions intended to alert the user to the risk of death or severe

injury should the unit be used improperly.

Used for instructions intended to alert the user to the risk of injury or media

damage should the unit be used improperly.

* Media damage refers to damage or other adverse effects caused with

respect to the home and all its furnishings, as well to domestic animals or

pets.

The symbol alerts the user to important instructions or warnings. The specific

meaning of the symbol is determined by the design contained within the triangle.

The symbol at left means "danger of electrocution."

The symbol alerts the user to items that must never be carried out (are forbid-

den). The specific thing that must not be done is indicated by the design contained

within the circle. The symbol at left means the unit must never be disassembled.

The symbol alerts the user to things that must be carried out. The specific thing

that must be done is indicated by the design contained within the circle. The symbol

at left means the power-cord plug must be unplugged from the outlet.

About the Symbols

Do not disassemble, repair, or modify.

Doing so may lead to fire or abnormal op-

eration resulting in injury.

Ground the unit with the ground wire.

Failure to do so may result in risk of electri-

cal shock in the even of a mechanical prob-

lem.

Do not use with any electrical power

supply that does not meet the ratings

displayed on the unit.

Use with any other power supply may lead

to fire or electrocution.

Do not use while in an abnormal state

(i.e., emitting smoke, burning odor,

unusual noise, or the like).

Doing so may result in fire or electrocution.

Immediately switch off first the sub power,

then the main power, unplug the power cord

from the electrical outlet, and contact your

authorized Roland DG Corp. dealer or ser-

vice center.

Use only with the power cord included

with this product.

Use with other than the included power cord

may lead to fire or electrocution.

About and Notices

Do not operate in a location exposed

to open flame, sparking, or static

electricity, or in a location exposed

to high temperatures, such as in the

immediate vicinity of a heater. Also,

do not place undried media in such

locations.

Doing so may result in fire due to

combustion of ink or cleaning liquid.

Do not store ink cartridges, cleaning

liquid, or discharged ink in locations

such as the following.

• Near open flame

• Locations exposed to high

temperatures, such as in the

immediate vicinity of a heater

• Near bleach, chemicals,

explosives, or the like

Doing so may cause fire.

Do not use with a damaged power

cord or plug, or with a loose electri-

cal outlet.

Doing so may

lead to fire,

electrical shock,

or electrocution.

Do not damage or modify the electri-

cal power cord, subject it to exces-

sive bending, twisting, pulling, bind-

ing, or pinching, or place any object

or weight on it.

Doing so may damage

the electrical power

cord, leading to fire,

electrical shock, or

electrocution.

When unplugging the electrical power

cord from the power outlet, grasp the

plug, not the cord.

Unplugging by pulling the cord may damage

it, leading to fire, electrical shock, or electro-

cution.

Do not attempt to unplug the power-

cord plug with wet hands.

Doing so may

result in electrical

shock or

electrocution.

To Ensure Safe Use

Store ink cartridges out of the reach

of children.

Ensure adequate ventilation for the

work area.

Failure to do so may result in odor, physical

distress, or fire.

Do not allow ink or cleaning liquid to

come into contact with eyes or skin.

Do not drink or deliberately smell ink

or cleaning liquid.

Doing so may be hazardous to your health.

If ink or cleaning liquid comes in

contact with the eyes, immediately

flush with running water for at least

15 minutes. If eye irritation

continues, seek treatment by a

physician.

If ink or cleaning liquid comes in

contact with the skin, immediately

wash well with soap and water. If

irritation or inflammation occur,

seek treatment by a physician.

If ink or cleaning liquid is

accidentally swallowed, do not

induce vomiting, and immediately

seek treatment by a physician.

If the odor of the ink or cleaning

liquid causes physical distress,

move to a well-ventilated location

and rest quietly. If dizziness or

nausea persists, seek treatment by a

physician.

When storing discharged ink

temporarily, place in the included

drain bottle or a durable sealed

container such as a metal can and

polyethylene tank, and cap tightly.

Leakage of discharged ink or its vapor may

result in odor, physical distress, or fire.

Load roll media at the proper position.

Otherwise the roll may

fall, resulting in injury.

Be sure to install the media guide

when loading roll media.

Otherwise the roll may

fall and cause injury.

Release the caster locks for the stand

before attempting to move.

Otherwise the

unit may tip

overand cause

injury.

Do not touch the tip of the separating

knife with your fingers.

Doing so may

result in injury.

Do not touch the control panel while

head cleaning or other cleaning is in

progress.

The printing carriage may move and cause

injury.

To Ensure Safe Use

Use the joining screws to secure the

unit to the stand.

Failure to do so

may result in

falling of the unit,

leading to injury.

Install in a level and stable location.

Failure to do so may result in the unit tipping

over, leading to injury.

Use care to avoid pinching the fingers

when placing the unit on the stand.

Doing so may

result in injury.

Do not allow liquids, metal objects or

flammables inside the machine.

Such media can cause fire.

Unpacking, and installation must be

carried out by four or more persons.

Otherwise the

machine or the

stand may fall,

resultingininjury.

Do not place hands within the space

to the front of the unit while in opera-

tion.

Doing so may

result in injury.

Before switching on the power, be

sure to install the drain bottle.

Otherwisedischarged fluid may leak from the

machine.

When the reinforcement pipe is in-

serted into the paper tube, do not

angle the roll media.

The reinforcement pipe may protrude from

the roll media and cause injury.

To Ensure Safe Use

Andere Handbücher für SJ-740

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Roland Drucker Handbücher

Roland

Roland CJ-540 Bedienungsanleitung

Roland

Roland VersaSTUDIO Bedienungsanleitung

Roland

Roland TrueVIS VG-640 Bedienungsanleitung

Roland

Roland VS-640 Bedienungsanleitung

Roland

Roland LEC-300 Bedienungsanleitung

Roland

Roland Texart RT-640 Bedienungsanleitung

Roland

Roland VersaCAMM ECO-SOL MAX3 Bedienungsanleitung

Roland

Roland iModela iM-01 Gebrauchs- und Pflegehandbuch

Roland

Roland VersaUV LEC2-330 Bedienungsanleitung

Roland

Roland TruVis SG Bedienungsanleitung

Roland

Roland VersaUV LEF-20 Gebrauchs- und Pflegehandbuch

Roland

Roland CJ-540 Bedienungsanleitung

Roland

Roland Raven PR-2417 Bedienungsanleitung

Roland

Roland SolJet SJ-600 Bedienungsanleitung

Roland

Roland Texart RT-640 Bedienungsanleitung

Roland

Roland CAMM-2 PNC-2300 Stücklistenhandbuch

Roland

Roland VersaUV LEC2-640 Betriebsanleitung

Roland

Roland XC-540MT Bedienungsanleitung

Roland

Roland TrueVIS SG2-640 Bedienungs- und Wartungshandbuch

Roland

Roland VersaSTUDIO BN-20D Bedienungsanleitung

Roland

Roland XF-640 Betriebsanleitung

Roland

Roland SolJet PROII SC-540 Bedienungsanleitung

Roland

Roland Hi-Fi JET FH-740 Bedienungsanleitung

Roland

Roland VersaUV LEJ-640 Bedienungs- und Wartungshandbuch

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung