Page 7of 20 Copyright ROMPA® Ltd
4-IN-1 AROMA DIFFUSER 20325, KH 1.11
To connect to an external music system
1. Turn off the standard music using the remote control (MELODY
ON/OFF button).
2. Plug the audio cable (shown below and right) into the audio socket
and the other end into the headphone output from your
MP3/MP4/CD/VCD/DVD player.
3. Disconnect the audio cable after use. The standard music in the
4-In-1 Diffuser cannot be played whilst the audio cable is still
connected.
SAFETY
1. Always supervise the use of this product.
2. This is not a toy.
CARE AND MAINTENANCE
1. Unplug after use and before nay maintenance, emptying etc.
2. Only use the product as specified above.
3. Use only the power supply provided.
4. Do not pull on the cable, or use it as a handle for moving the unit.
5. Keep sharp and pointed objects away from the unit and the cable.
6. Do not use if the cable or product is damaged, or if either has been dropped.
7. Use only the power supply provided.
8. Keep the cable and power supply dry.
9. Clean the water reservoir regularly (every two weeks) with a clean tissue or a soft cloth
and a very small amount of a neutral cleaning fluid. Also clean the water level sensor
and the mist chip at least twice a month. It is important to keep the product clean to
ensure optimum operation of the evaporation. Do not use abrasive, harsh or corrosive
cleaning products.
10. To empty the water out, lean the unit as shown in the diagram on the next page:
