ROSE DISPLAYS ANOQUICK SQUARE WITH MULTICLIPS Bedienungsanleitung

35 Congress Street, Salem, MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Square Profile Instruction Sheet

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClips for future projects.

MultiClips

1UP-0101

End Caps

06-5545

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

AnoQuick™

Instructions For Hanging

Incept-7.31.02

Figure 2

AnoQuick

12A300SQ

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

35 Congress Street, Salem, MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClip for future projects.

Incept-7.31.02

End Caps

06-5545

AnoQuick

12A300SQ

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

MultiClip

1UP-0101

Square Profile OneUp

Instruction Sheet

AnoQuick™

Figure 2

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Incept-7.31.02

End Caps

06-5545

AnoQuick

12A300

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

MultiClips

1UP-0101

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClips for future projects.

Square Profile Instruction Sheet

AnoQuick™

Figure 2

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Incept-7.31.02

End Caps

06-5545

AnoQuick

12A300SQ

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

MultiClip

1UP-0101

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClip for future projects.

Square Profile OneUp

Instruction Sheet

AnoQuick™

Figure 2

Figure 6Figure 5

Figure 1

Figure 3 Figure 4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ROSE DISPLAYS Zubehör Handbücher

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND WITH 2 WALL MOUNTS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH ADHESIVE Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ULTRAFRAME Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH LOOP AND SAUCER AND... Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH ANOCONNECTORS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA FRAME ROUND WITH CABLE AND SAUCER Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND ASSEMBLED-MOLLY ANCHORS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE CLIP AND LOOP AND... Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI ROUND WITH CABLE CLIP AND LOOP AND... Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE AND SAUCER Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS SPIDER CEILING TRACK WITH ADHESIVE Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOSCREEN WITH VARIO BASE Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH CABLE CLIP AND BALL CHAIN Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND WITH 4 WALL MOUNTS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOSKYBOX-TOP LOADING 4 WAY Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS CABLE CLIP Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA FOR PEGBOARD Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA SQUARE WITH CABLE AND SAUCER Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ADVANCETRAK WITH METAL CLIP AND V CLIP Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH MULTICLIPS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS SNAIL ADHESIVE WITH CEILING SLUG Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH OLD ONEUP GOTCHA CLIPS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH GOTCHA CLIPS Bedienungsanleitung

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH V CLIP Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung