Rose electronics Xcion XCK-2DTXUD1D Bedienungsanleitung

Xcion Extender

DVI / VGA

/ HDMI Switchable KVM Extender over CATx or Fiber

Switching Options

Installation and

Operation Manual

10707 Stancliff Road

Houston, Texas 77099

Phone: (281) 933-7673

tech-

[email protected]

LIMITED WARRANTY

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including photocopying and

recording, without the prior written permission of Rose Electronics.

manual-xcion-switching-option-2017-05-09.docx

Rose Electronics®warrants the Xcion Switch Mode Extender to be in good working order for one year from the

date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working

order at any time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the

Unit as set forth below. Repair parts and replacement units will be either reconditioned or new. All replaced

parts become the property of Rose Electronics. This limited warranty does not include service to repair

damage to the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit, including

static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose

Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail,

you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to the

warranty service location, and to use the original shipping container or its equivalent. You must call for a return

authorization number first. Under no circumstances will a unit be accepted without a return authorization

number. Contact an authorized repair center or Rose Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A

PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS

OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE

REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE

ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST

SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR

THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER

PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS

WHICH MAY VARY FROM STATE TO STATE.

DECLARATIONS OF CONFORMITY

This is to certify that, when installed and used according to the instructions in this manual, together with the

specified cables, the Units listed in APPENDIX Bare shielded against the generation of radio interferences in

accordance with the application of Council Directives 2006/95/EC and 2004/108/EC, as well as these

standards:

■EN 55022: 2010 (Class A)

■EN 55024: 2010

■EN 61000-3-2: 2014

■EN 61000-3-3: 2013

This equipment has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at their own expense.

The product safety of the devices is proven by their compliance with the following standards:

■EN 60950-1: 2006+A2:2013

■IEC 60950: 2005

■LASER CLASS 1: EN 60825-1:2007 compatible with IEEE 803.3z

These devices comply with Directive 2011/65/EU of the European Parliament and of the council of 8 June

2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(RoHS 2, RoHS II). The device labels carry a respective marking.

TABLE OF CONTENTS

Contents

Disclaimer 1

System Introduction 1

Features 2

Package Contents 2

Xcion Models 3

Front View All Models 3

Rear View DVI CATx and Fiber Models 3

Connector Description DVI Models 4

HDMI CATx Model 5

Connector Description HDMI Model 5

Installation 6

Start Up 8

Status Overview 8

Xcion Menu System 9

Update Flash Firmware 9

Option Overview 10

DDC Options 10

Network Settings 11

Extender Settings 11

Local Extender Settings 12

Remote Extender Settings 13

Switching List 16

Quit 16

SWITCHING Menu Guide / Settings 17

Master View (Device Configuration) Menu 18

Network Mode 23

Set Timeout 25

Switching Between Computers 26

Video Sharing 27

Firmware Update Instructions 28

Direct Update 29

Automatic Update 29

Network Update 32

Troubleshooting 34

Safety 35

Maintenance and Repair 36

Technical Support 36

Figures

Figure 1. Xcion Extenders Transmitter and Receiver Front View 3

Figure 2. Xcion DVI CATx Receiver and Transmitter Rear View 3

Figure 3. Xcion DVI Fiber Transmitter and Receiver Rear View 3

Figure 4. Connectors on DVI Transmitter 4

Figure 5. Connectors on DVI Receiver 4

Figure 6. Xcion HDMI Rear View 5

Figure 7. Connectors on HDMI Transmitter 5

Figure 8. Connectors on HDMI Receiver 5

Figure 9. Xcion DVI Switch Mode Installation 6

Figure 10. Xcion HDMI Switch Mode Installation 7

Figure 11. Connecting All Transmitters and Receivers 7

Figure 12. Status Overview Screen 8

Figure 13. Xcion Switch Mode Main Menu 9

Figure 14. Xcion DVI and HDMI Options Overview Menu 10

Figure 15. DDC Options Menu 10

Figure 16. Extender Settings Menu 11

Figure 17. Local Extender Settings Menu 11

Figure 18. Remote Extender Settings Screen 12

Figure 19. Extender Settings / VGA Parameters Submenu 12

Figure 20. Extender Settings / Audio Input Gain Submenu 13

Figure 21. RS232 RJ12 Port 14

Figure 22. Extender Settings / Lock Menu Submenu 15

Figure 23. Keyboard Shortcuts Screen 16

Figure 24. Network Settings Login Screen 17

Figure 25. Network Settings Menu 17

Figure 26. Network Settings / Master View Menu 18

Figure 27. Master View / Connections Overview Screen 18

Figure 28. Master View / Connections Detail Screen 19

Figure 29. Master View / User List Screens 19

Figure 30. Master View / User Detail Screen 20

Figure 31. Master View / Console Extender List Screen 21

Figure 32. Master View / PC Extender List Screen 21

Figure 33. Master View / Multi-Head Configuration Screen 22

Figure 34. Master View / Multi-Head Detail Screen 22

Figure 35. Network Modes Screen 23

Figure 36. Password Timeout Screen 25

Figure 37. Sample Switching Screen 26

Figure 38. Firmware Update Screen 28

Figure 39. Automatic Update Settings Screen 30

Figure 40. Saved Firmware Required for Automatic Update 30

Figure 41. Commencing of Automatic Update 31

Figure 42. Automatic Update Complete 31

Figure 43. Network Update Screen 32

Figure 44. Load New Version from Bitmap Screen 33

Tables

Table 1. Connectors on the Xcion DVI Models 4

Table 2. Connectors on the Xcion HDMI Model 5

Table 3. Front Panel Status Indicators 8

Table 4. RS232 RJ12 Pinouts 14

Table 5. RS232 Transmission Rates 14

Table 6. Firmware Update Terminology 28

Table 7. Troubleshooting the Xcion Extenders 34

Table 8. Xcion Extender Specifications 37

Table 9. CATx Cable Pins 39

Appendices

Appendix A – Specifications 37

Appendix B – Part Numbers 38

Appendix C – Access Rights 38

Appendix D – Hotkeys 38

Appendix E – Recommended Gigabit Network Switches 38

Appendix F – Cable Specification 39

CAT5/6/7 Cables 39

Fiber Cables 39

Appendix G – Appropriate Firmware Update Methods 40

Firmware Update of Xcion DVI Switch Mode Extenders 40

Firmware Update of Xcion HDMI Switch Mode Extenders 40

INTRODUCTION

Xcion Extender Manual 1

Disclaimer

While every precaution has been taken in the preparation of this manual, the manufacturer assumes no

responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting

from the use of the information contained herein. The manufacturer reserves the right to change the

specifications, functions, circuitry of the product, and manual content at any time without notice.

The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances

outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury

arising directly or indirectly from the use of this product. (See limited warranty.)

System Introduction

Thank you for choosing the Xcion Switch Mode family of extenders. They are the result of Rose Electronics

commitment to providing state-of-the-art solutions for today’s demanding workplace. The Xcion Switch Mode

Extender is the ideal device for extending HDMI, DVI or VGA video and USB with no loss of video quality.

The Xcion Switch Mode Extender is available in three models offering a choice of DVI or VGA extension over

CATx or Fiber, or HDMI extension over CATx. Signals can be extended up to 492 ft (150m) over CATx or 1640

ft (500m) over multi-mode fiber cables. Video resolutions up to full HD 1080p and 1920 x 1200 @ 60Hz are

supported.

The Receiver unit supports up to 4 directly connected USB1.1 and USB2.0 devices at speeds up to 12Mbps.

Devices such as keyboards, mice, touch screens, tablets, scanners, integrated hub-type keyboards, or printers

can be connected. Optional USB storage device support can be added by entering an “unlock code” in the

OSD menu. The remote USB hub is a built-in 4-port USB high speed Hub.

The Switching Option offers the ability to use a Gigabit Ethernet switch to effectively transform a group of DVI

or HDMI extenders into a KVM matrix switch. By connecting the switching Xcion extenders to an Ethernet

switch, each Receiver acts as a KVM station that can connect to any computer connected to a Transmitter in

the group. Up to 48 ports can be connected in this way. This affordable solution requires just once license for

each Receiver in the setup.

The versatile Xcion Switch Mode Extender allows for DVI and HMI extenders to be mixed in the system. DVI

Transmitters and HDMI Receivers, or any other combination of the two may be connected to the Gigabit

Ethernet switch, and will work seamlessly together.

Users can be set up with access rights and passwords to provide secure access to the system. User groups

can also be created with different access levels.

Switching between computers on can be accomplished through On-Screen Menus, hotkeys or over external

serial or Ethernet interfaces. Switching is instantaneous with no discernible delay. The units have perfect video

transmission with minimal latency. The switching extenders have dual-head and multi-head support for up to

10 monitors.

Every Xcion Switch Mode extender is packaged in a compact steel chassis, ideal for use in industrial

applications and at installation sites requiring a robust and durable product. The Transmitter and Receiver

chassis can be rack mounted in a rack cabinet, with up to 4 units side-by-side on a 1U shelf, as well as wall,

table or DIN rail mounted.

Xcion Extender Manual 2

Features

■Extends full HD 1080p and 1920 x 1200 @ 60 Hz digital or analog video with no loss of quality

■Transparently extends USB 1.1 and 2.0 devices at speeds up to 12Mbps

■Extensions distances up to 492 ft (150 m) over CATx or 1640 ft (500 m) over multi-mode fiber

■Optional Serial RS232 and analog audio support in the DVI/VGA models

■Local video/monitor connection at the transmitter

■Choice between 5 internal EDID sets, plus the ability to select either remote or local monitor EDID via the

OSD menu

■4 units can be mounted in a 1U 19” rack

■Multiple PCs can be controlled from a single workstation

■Multiple workstations can be connected with multiple PCs, up to a maximum of 48 ports

■Dual- and multi-head support for up to 10 monitors

■Switching can be performed through the On-Screen Menu, hotkeys or over external RS232 or Ethernet

interfaces

■Convenient password system and user-rights management for increased security

■Groups of users with different access rights can be set up

■Can be configured to automatically switch to a backup PC if the primary PC goes down

■Switching is instantaneous

■Distributed intelligence across every endpoint

■Sharing mode allows multiple KVM stations to simultaneously access the same computer

■Perfect video transmission with minimal latency

■Name identification of computers allows them to be relocated to different ports, with the system staying

correctly configured

■A mixture of VGA and DVI video signals can be used

■A mixture of fiber and copper devices, as well as different device types can be connected together

■Only one license is required per Receiver

Package Contents

The package contents consist of the following:

■1 x Transmitter

■1 x Receiver

■1 x DVI cable or 1 x HDMI cable, depending on the model

■1 x USB Cable

■2 x 12V 1 Amp Power Supply Units

■4 x Mounting Pads

■4 x Rubber Feet

■Manual

Additional cables are usually ordered separately. If the package contents are not correct, contact Rose

Electronics or your reseller so the problem can be quickly resolved.

MODELS

Xcion Extender Manual 3

Xcion Models

The Xcion is available in three distinct models as described below.

Front View All Models

Figure 1. Xcion Extenders Transmitter and Receiver Front View

Rear View DVI CATx and Fiber Models

Figure 2. Xcion DVI CATx Receiver and Transmitter Rear View

Figure 3. Xcion DVI Fiber Transmitter and Receiver Rear View

Xcion Extender Manual 4

Connector Description DVI Models

Figure 4. Connectors on DVI Transmitter

1. dvi-in:Use the supplied DVI cable to connect

this port to the DVI port on the source

computer.

2. dvi-out:Connect a DVI monitor to this port for

a local display, if desired.

3. usb:Use the supplied USB cable to connect to

a USB port on the source computer.

4. kvm-link:Connect the CATx or Fiber

interconnect cable, based on the model, to the

Ethernet switch being used to form the matrix.

5. dc:Connect one of the supplied Power Supply

Units here, and connect it to an AC power

supply.

If the Sound Option has been enabled

6. in:Connect an analog stereo audio cable from

this port to the line out audio port (green) on

the source computer.

7. out: Connect an analog audio cable from this

port to the microphone input port (pink) on the

source computer.

If the Serial Option has been enabled

8. com: Connect a serial cable from this port to

the serial device that is to be controlled with

serial commands.

Figure 5. Connectors on DVI Receiver

1. dvi-out:Connect the output DVI monitor to this

port.

2. usb:Connect to USB 1.1 and 2.0 devices

including keyboard and mouse. If the USB

memory option has been enabled, hard disks

and flash drives can also be connected here.

3. kvm-link:Connect the CATx or Fiber

interconnect cable, based on the model, to the

the Ethernet switch being used to form the

matrix.

4. dc:Connect one of the supplied Power Supply

Units here, and connect it to an AC power

supply.

If the Sound Option has been enabled

5. in: Connect an analog microphone to this port.

6. out: Connect a stereo speaker system to this

port.

If the Serial Option has been enabled

7. com: Connect a serial cable from this port to

the serial device that issues the controlling RS-

232 commands

Table 1. Connectors on the Xcion DVI Models

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rose electronics Extender Handbücher

Rose electronics

Rose electronics PS/2 Bedienungsanleitung

Rose electronics

Rose electronics ViewLink CATx Bedienungsanleitung

Rose electronics

Rose electronics AUTO EQUALIZATION Bedienungsanleitung

Rose electronics

Rose electronics Orion XTender OT2-SLDTXUD1D Bedienungsanleitung

Rose electronics

Rose electronics Xcion DVI/VGA over CATx Bedienungsanleitung

Rose electronics

Rose electronics ViewLink Coax Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Bedienungsanleitung

Rose electronics

Rose electronics CRK-2DTPPDVI Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Plus Bedienungsanleitung

Rose electronics

Rose electronics CLK-4U2FM-500M Bedienungsanleitung

Rose electronics

Rose electronics CRK-1DFMPDVI/SF Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI CAT Series Bedienungsanleitung

Rose electronics

Rose electronics CRV-DLDFMPDVI Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Rack CRV-12SLP Betriebsanleitung

Rose electronics

Rose electronics XtendVue Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink CLK-4U2FMB-500M Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI Mini Bedienungsanleitung

Rose electronics

Rose electronics CrystalView DVI EX Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink CAT5 Serial Bedienungsanleitung

Rose electronics

Rose electronics ORION Bedienungsanleitung

Rose electronics

Rose electronics CrystalView Exact Bedienungsanleitung

Rose electronics

Rose electronics VideoSplitter CAT5 Bedienungsanleitung

Rose electronics

Rose electronics CrystalView CAT5 Rack CRV-12SLP Bedienungsanleitung

Rose electronics

Rose electronics CrystalLink USB-3-2-1 Fiber Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung