Ruckus Wireless R610 Bedienungsanleitung

Published September 2017, Part Number 800-71495-001 Rev C

Unleashed R610 Access Point

Quick Setup Guide

This Quick Setup Guide provides step-by-step

instructions on how to set up your Ruckus Wireless

Unleashed R610 Dual Band 802.11ac Multimedia Wi-Fi

Access Point (AP).

For detailed information on configuration and

administration of your Unleashed R610, refer to the

Unleashed Online Help, available from https://

docs.ruckuswireless.com/unleashed/200.4/index.html.

This Guide in Other Languages

•请从以下网站获得该指南的简体中文版

https://support.ruckuswireless.com.

• Vous trouverez la version française de ce guide à

l'adresse suivante https://support.ruckuswireless.com.

•このガイドの⽇本語版は https://support.ruckuswireless.com

でご覧ください。

•이가이드의 한국어 버전은 웹사이트

(https://support.ruckuswireless.com)에서 확인하시기 바랍니다 .

• Veja a versão em português (Brasil) deste guia em

https://support.ruckuswireless.com.

• Puede ver la versión en español (América Latina) de

esta guía en https://support.ruckuswireless.com.

Before You Begin

Before deploying Ruckus Wireless products, please

check for the latest software and the release

documentation.

• User Guides and Release Notes are available at

http://support.ruckuswireless.com/documents.

• Software Upgrades are available at

http://support.ruckuswireless.com/software.

• Open Source information is available at

http://opensource.ruckuswireless.com.

• Software License and Limited Warranty are available

http://support.ruckuswireless.com/warranty.

Package Contents

• R610 Access Point

• One wall-mount anchor kit, including two 1" No. 8

steel panhead Phillips sheet metal screws, one 5mm

M2.5 x 1.06 Torx security screw, and wall-mount

anchors

•OneexternalT-bar bracket (two unassembled parts)

• One unit removal pin

• Regulatory flyer

• Product warranty statement

• Declaration of Conformity, if required

•ThisQuick Setup Guide

Step 1: Collect Tools and Setup Requirements

• A computer running Windows 7, 8, 10 or Mac OS X

(procedures for other OS’s are similar)

• Two Cat 5e Ethernet cables

• No. 2 Phillips screwdriver and T8 Torx driver for wall

mounting anchor kit

• An AC power adapter (sold separately), or

• An 802.3af or 802.3at -compliant Power over

Ethernet (PoE) switch or PoE injector

• When mounting the R610 to a truss or pole, two

customer-supplied cable ties

Step 2: Connect the AP to Power and Your

Network

Figure 1: Top view

1After removing your Unleashed AP from its package,

connect it to your network switch or router using an

Ethernet cable.

2Using an AC adapter (sold separately), connect the

AP 12VDC port to a protected power source.

Alternatively, connect the 10/100/1000 POE In port to

a PoE injector or switch for both power and network

connectivity.

3Verify that the Power LED on the external enclosure is a

steady green.

Figure 2: Bottom view

STEP 3: CONFIGURE YOUR UNLEASHED NETWORK

Unleashed can be deployed using either a Mobile App, available for both iOS and

Android, or using your PC’s web browser. Refer to the relevant section depending on

which method you prefer to use:

•Step 3a: Setup Using the Unleashed Mobile App

•Step 3b: Setup Using a Web Browser

Step 3a: Setup Using the Unleashed Mobile App

To perform setup using the Unleashed Mobile App, download the iOS or Android app

from the app store.

1As soon as the Unleashed AP is powered on and connected

to the local network, it boots up and begins broadcasting a

temporary unencrypted WLAN named “Configure.Me-

[xxxxxx]” from both radios.

2Using your client’s Wi-Fi connection settings, select and

associate to the “Configure.Me-[xxxxxx]” WLAN.

3Launch the app, and follow the on-screen instructions to

configure your Unleashed network(s).

Figure 3. Unleashed Mobile App for iOS and Android

Published September 2017, Part Number 800-71495-001 Rev C

Figure 4. Configuring Unleashed from the Mobile App

Step 3b: Setup Using a Web Browser

1As soon as the Unleashed AP is powered on and connected

to the local network, it boots up and begins broadcasting a

temporary unencrypted WLAN named “Configure.Me-

[xxxxxx]” from both radios.

2Using your client’s Wi-Fi connection settings, select and

associate to the “Configure.Me-[xxxxxx]” WLAN.

3Launch a web browser and enter the following into the

browser’s URL bar: unleashed.ruckuswireless.com, and press

Enter.

4You will be redirected to the Setup Wizard. Complete the

steps in the Setup Wizard and click Finish.

Figure 5. Complete the Setup Wizard to set up your Unleashed network

5Once the Setup Wizard is finished, a “Configuring system

settings and rebooting” progress screen appears. Wait until

the process is complete.

6Connect to the WLAN that you configured in the Setup

Wizard, and click OK to reconnect. You will be redirected to

the Unleashed login screen.

7Enter your Admin Name and Password to login.

Figure 6. The Login page

8Upon successful login you will be presented with the

Unleashed Dashboard, which displays an overview of your

Ruckus Unleashed network.

Figure 7. The Unleashed Dashboard

9Click OK to save your changes.

Your changes are put into effect immediately. Continue with Step 4: Customize Your

Wireless LANs.

Step 4: Customize Your Wireless LANs

Once the Unleashed Master AP has been initialized, you

can fine-tune the settings of your first WLAN (that you

created during the setup wizard), and create any

additional WLANs needed prior to attaching additional

Unleashed member APs. Then, when you deploy

additional member APs in whatever order you prefer,

they will automatically retrieve all WLAN configuration

settings (and any other settings you have configured)

from the Unleashed Master AP.

1From the Dashboard, click anywhere in the WiFi

Networks section to expand the display of your

deployed WLANs.

2On the left side of the screen, select the WLAN box

for the WLAN you would like to configure, and click

the Edit button to edit the configuration; or click

Create to create a new WLAN.

3If you made any changes to the original WLAN, you

will be disconnected and will need to reconnect once

the changes have been deployed on the AP radios.

Congratulations! Your Unleashed network is now

configured and ready for use. You may now proceed to

Step 5: Deploy Additional Unleashed Access Points.

Step 5: Deploy Additional Unleashed Access

Points

Deploying additional Unleashed member APs is simply a

matter of connecting them to the same Layer 2 network

(subnet) and providing power. They will discover the

Unleashed Master and join automatically. No additional

steps are necessary.

(Optional) Mounting Instructions

The R610 can be mounted to a T-bar, wall or ceiling a

using the enclosed mounting kits. Refer to the following

sections:

•Mounting on a Flat Surface

•Mounting on a Recessed Drop-Ceiling T-Bar

•Mounting on a Flush Drop-Ceiling T-Bar

•Mounting on a Truss or Pole

Mounting on a Flat Surface

1Use the Mounting Template on the last page of this

Quick Setup Guide as a template to mark the

locations for drill holes on the mounting surface.

2Use a 5mm drill bit to drill holes approximately 25mm

into the mounting surface (Figure 8).

3Insert the anchors and mounting screws into the mount-

ing surface, leaving approximately 1/4” (6 mm) of the

screw heads protruding for the AP enclosure.

4To remove the AP, insert the unit removal pin into the

hole on the top of the AP to unlock, then push the AP up

to release the AP enclosure from the mounting screws.

Figure 8. Flat surface mounting

Published September 2017, Part Number 800-71495-001 Rev C

Mounting on a Recessed Drop-Ceiling T-Bar

The enclosed T-bar bracket supports mounting to recessed

drop ceiling T-bars.

•Mounting an AP using the External Bracket

•Removing an External Bracket from a T-Bar

•Removing the External Bracket from the AP

Mounting an AP using the External Bracket

1Position the studs on the bottom of the T-bar bracket (B

in Figure 9) in the mounting holes on the R610 enclosure,

and then slide the T-bar bracket until the studs are in the

narrow parts of the R610 mounting keyholes.The mount-

ing bracket locks in place on the AP enclosure.

Figure 9. Attaching the external bracket to the AP

2Attach the locking tab (C in Figure 9) to one side of the T-

bar and the bracket (B in Figure 9) to the other side of the

T- b a r.

3Slide the locking tab (C) into the bracket (B) so that it

locks in place around the T-bar (Figure 10). Make sure that

both clasps are gripping the T-bar.

Figure 10. Attaching the external bracket to the T-bar

Removing an External Bracket from a T-Bar

1Move the ceiling tiles out of the way.

2Slide the locking tab away from the T-bar to release

the AP-bracket assembly from the T-bar.

3The R610-and-T-bar bracket assembly comes away

from the T-bar.

Figure 11. Removing the external bracket from the T-bar

Removing the External Bracket from the AP

1Insert the unit removal pin into the hole on the front of

the AP to unlock the mounting bracket from the AP

enclosure.

2Slide the mounting bracket (Figure 12) toward the

Ethernet ports on the R610 until it detaches from the

R610.

Figure 12. Removing the external bracket from an AP

Mounting on a Flush Drop-Ceiling T-Bar

Mounting an AP using the Integrated T-bar clips

1Orient the AP so that the T-bar is positioned between

the T-bar clips as shown in Figure 13, then rotate the AP

until the third T-bar clip catches the T-bar and the

latch locks the T-bar in place (Figure 14).

Figure 13. Attaching the AP to the T-bar

Figure 14. Locking the AP to the T-bar

2Insert the Torx security screw into the hole near the

latch to lock the AP in place.

Removing an AP Integrated Bracket from a T-Bar

1To remove the AP from a T-bar, first remove the

security screw, then depress the latch while rotating

the AP so that the T-bar clips disengage the T-bar.

Mounting on a Truss or Pole

1Feed the customer-supplied cable ties through the

four slots on the back of the R610.

Figure 15 Cable tie slots

2Fasten the R610 to the truss or pole using the cable

ties.

Note: This mounting bracket can also be used on a flush

drop-ceiling T-bar, so the four rubber feet on the

bottom of the AP minimize ceiling tile displacement.

Note: The built-in mounting clips on the bottom of the

AP are designed to accommodate 15/16 T-bar widths

only.

Published September 2017, Part Number 800-71495-001 Rev C

Mounting Template

(Page 4 of 4)

Andere Ruckus Wireless Drahtloser Zugangspunkt Handbücher

Ruckus Wireless

Ruckus Wireless R720 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless R730 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T300 Installationsanleitung

Ruckus Wireless

Ruckus Wireless Unleashed T610s Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7372 Einrichtungshandbuch

Ruckus Wireless

Ruckus Wireless ZoneFlex 7762 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7762-S Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless SmartCell 8800-S Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless C110 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless MediaFlex 7811 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless R750 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless C110 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7762 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless zoneflex t301n Installationsanleitung

Ruckus Wireless

Ruckus Wireless E510 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7782 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T310d Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless R560 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless C500 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex series Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex series Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7352 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T310n Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7352 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung