Ruckus Wireless SmartCell Gateway 200 Bedienungsanleitung

Ruckus Wireless™

SmartCell Gateway™200

Getting Started Guide for Release 2.5.1

Part Number 800-70768-001 Rev A

Published October 2014

www.ruckuswireless.com

SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A 2

No part of this documentation may be used, reproduced, transmitted, or translated, in any form or by any means,

electronic, mechanical, manual, optical, or otherwise, without prior written permission of Ruckus Wireless, Inc.

(“Ruckus”), or as expressly provided by under license from Ruckus.

Destination Control Statement

Technical data contained in this publication may be subject to the export control laws of the United States of America.

Disclosure to nationals of other countries contrary to United States law is prohibited. It is the reader’s responsibility to

determine the applicable regulations and to comply with them.

Disclaimer

THIS DOCUMENTATION AND ALL INFORMATION CONTAINED HEREIN (“MATERIAL”) IS PROVIDED FOR GENERAL

INFORMATION PURPOSES ONLY. RUCKUS AND ITS LICENSORS MAKE NO WARRANTY OF ANY KIND, EXPRESS

OR IMPLIED, WITH REGARD TO THE MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE

MATERIAL IS ERROR-FREE, ACCURATE OR RELIABLE. RUCKUS RESERVES THE RIGHT TO MAKE CHANGES OR

UPDATES TO THE MATERIAL AT ANY TIME.

Limitation of Liability

IN NO EVENT SHALL RUCKUS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUEN-

TIAL DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, DATA OR USE, INCURRED BY YOU OR ANY

THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, ARISING FROM YOUR ACCESS TO, OR USE

OF, THE MATERIAL.

Trademarks

Ruckus Wireless, Ruckus, Bark Logo, BeamFlex, ChannelFly, Ruckus Pervasive Performance, SmartCell, ZoneFlex,

Dynamic PSK, FlexMaster, MediaFlex, MetroFlex, Simply Better Wireless, SmartCast, SmartMesh, SmartSec, Speed-

Flex, ZoneDirector, ZoneSwitch, and ZonePlanner are trademarks of Ruckus Wireless, Inc. in the United States and

other countries. All other product or company names may be trademarks of their respective owners.

SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A 3

Contents

About This Guide

Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Documentation Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1 Preparing to Set Up the SmartCell Gateway 200

Unpacking the SCG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Verifying the Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Rack Mount Kit Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Prepare the Required Hardware and Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Get to Know the Physical Features of the SCG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2 Mounting and Powering the SCG

Mounting the SCG onto a Server Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

What You Will Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Step 1: Unpack the Rack Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Step 2: Separate the Slide Rails into the Inner and Outer Parts . . . . . . . . . . . . . . . . . . . . 21

Step 3: Install the Outer Rail Slides to the Rack Posts. . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Step 4: Fasten the Shoulder Screws to the Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Step 5: Install the Inner Rails on the Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Step 6: Fasten the Inner Rails to the Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Step 7: Attach the Mounting Ears to the Rail Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . 25

Step 8: Slide the Rail Assembly into the Outer Rails and Secure to the Rack . . . . . . . . . 25

Powering On the SCG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Using AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Using DC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3 Preparing the Interface Settings and Administrative Computer

Preparing the SCG Interface Settings to Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Preparing the Administrative Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

4 Running the Setup Wizard and Logging On to the Web Interface

Overview of the SCG Setup Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Contents

SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A 4

Step 1: Start the Setup Wizard and Set the Language . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Step 2: Configure the Management IP Address Settings. . . . . . . . . . . . . . . . . . . . . . . . . 39

Step 3: Configure the DataPlane IP Address Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Step 4: Configure the Cluster Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

If This SCG Is Forming a New Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

If This SCG Is Joining an Existing Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Step 5: Verify the Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Connecting the SCG to the Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Supported SFP+ Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Logging On to the Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

5 Configuring the SCG for the First Time

Creating an AP Zone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Configuring AAA Servers and Hotspot Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Adding an AAA Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Creating a Hotspot Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Creating a Registration Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Configuring the Rule Priority. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Defining the WLAN Settings of an AP Zone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

General Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

WLAN Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Authentication Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Encryption Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Authentication & Accounting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

RADIUS Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Configuring DHCP Option 43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Verifying That Wireless Clients Can Associate with a Managed AP . . . . . . . . . . . . . . . . . 79

What to Do Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Index

SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A 5

About This Guide

This SmartCell Gateway™200 (SCG) Getting Started Guide provides information

on how to set up the SCG appliance on the network. Topics covered in this guide

include mounting, installation, and basic configuration.

This guide is intended for use by those responsible for installing and setting up

network equipment. Consequently, it assumes a basic working knowledge of local

area networking, wireless networking, and wireless devices.

NOTE: If release notes are shipped with your product and the information there

differs from the information in this guide, follow the instructions in the release notes.

Most user guides and release notes are available in Adobe Acrobat Reader Portable

Document Format (PDF) or HTML on the Ruckus Wireless Support website at

https://support.ruckuswireless.com/documents.

About This Guide

Document Conventions

SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A 6

Document Conventions

Tab l e 1 and Table 2 list the text and notice conventions that are used throughout

this guide.

Related Documentation

In addition to this Getting Started Guide, each SmartCell Gateway 200 documen-

tation set includes the following:

•Administrator Guide: Provides detailed information on how to configure the SCG.

The Administrator Guide is available for download on the Ruckus Wireless

Support website at http://support.ruckuswireless.com.

•Online Help: Provides instructions for performing tasks using the SCG web

interface. The online help is accessible from the web interface and is searchable.

•Release Notes: Provide information about the current software release, including

new features, enhancements, and known issues.

Table 1. Text conventions

Convention Description Example

monospace Represents information as it

appears on screen

[Device name]>

monospace bold Represents information that

you enter

[Device name]> set

ipaddr 10.0.0.12

default font bold Keyboard keys, software

buttons, and field names

On the Start menu, click All

Programs.

italics Screen or page names Click Advanced Settings. The

Advanced Settings page

appears.

Table 2. Notice conventions

Notice Type Description

NOTE Information that describes important features or instructions

CAUTION! Information that alerts you to potential loss of data or potential

damage to an application, system, or device

WARNING! Information that alerts you to potential personal injury

About This Guide

Documentation Feedback

SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A 7

NOTE: For a complete list of documents that accompany this release, refer to the

Release Notes.

Documentation Feedback

Ruckus Wireless is interested in improving its documentation and welcomes your

comments and suggestions. You can email your comments to Ruckus Wireless at:

[email protected]

When contacting us, please include the following information:

• Document title

• Document part number (on the cover page)

• Page number (if appropriate)

For example:

• SmartCell Gateway 200 Getting Started Guide (Release 2.5)

• Part number: 800-70768-001

• Page 88

SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A 8

Preparing to Set Up the SmartCell

Gateway 200

In this chapter:

•Unpacking the SCG

•Verifying the Package Contents

•Before You Begin

Preparing to Set Up the SmartCell Gateway 200

Unpacking the SCG

SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A 9

Unpacking the SCG

WARNING! The SCG appliance is heavy (40 lbs/18.14kg). Two people should work

together to unpack the SCG. Ruckus Wireless strongly recommends against one

person attempting to perform this task alone.

Follow these steps to unpack the SCG appliance.

1Open the SCG package, and then carefully remove the contents.

2Return all packing materials into the shipping box, and then put the box away

in a dry location.

3Verify that all of the items listed in Verifying the Package Contents (below) are

included in the package. Check each item for damage. If any item is damaged

or missing, notify your authorized Ruckus Wireless sales representative

immediately.

Verifying the Package Contents

A complete SCG package contains all of the items listed below:

• One SCG appliance with two AC/DC power supply units

• One console cable (use only this cable to connect the front or rear serial port to

another device)

• One rack mount kit (see Rack Mount Kit Contents below)

• Service Level Agreement / Limited Warranty Statement sheet

• Regulatory Statement sheet

•ThisGetting Started Guide

NOTE: The AC power cable (part number 902-0174-XX00, where XX is the two-

character country code) is not supplied with the SCG appliance and may be ordered

separately.

Rack Mount Kit Contents

The rack mount kit contains the following items:

• Outer rail slide assembly (see A in Figure 1)

• Inner rail slide assembly (see B in Figure 1)

• Plastic bag #1, which contains the following items:

• Four hex head shoulder screws

Preparing to Set Up the SmartCell Gateway 200

Verifying the Package Contents

SmartCell Gateway 200 Release 2.5.1 Getting Started Guide, 800-70768-001 Rev A 10

• Two #10-32 x 3/8” screws

• Two rack mounting ears

• Plastic bag #2, which contains the following items:

• Outer slide rail screws, 8 #8-32 x 1/2 (see D in Figure 1)

• Inner slide rail screws, 8 #6-32 x 1/4 (see D in Figure 1)

• Rack screws, 2 #8-32 x 3/4 (see D in Figure 1)

•TheSmartCell Gateway 200 Rack Mount Installation Guide

NOTE: This rack mount kit includes two sets of 8-32 x 1/2” screws. One set of

eight has a larger screw head size than the second set of eight. Use the set of 8-

32 x 1/2” screws that best fits the rack in which you are installing the rail kit.

Figure 1. Rail assemblies and rail screws

Andere Handbücher für SmartCell Gateway 200

Inhaltsverzeichnis

Andere Ruckus Wireless Drahtloser Zugangspunkt Handbücher

Ruckus Wireless

Ruckus Wireless T305e Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7352 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex H500 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless R560 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7761-CM Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless Unleashed T610s Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless R320 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T710s Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7782-E Installationsanleitung

Ruckus Wireless

Ruckus Wireless H320 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7341 802.11n Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7982 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless VF2811 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless H510 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T710 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless SmartCell 8800-S Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex R500 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless R730 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7982 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 2741 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7762-S Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7762 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless C110 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 2942 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung