Ruckus Wireless ZoneFlex 7762 Bedienungsanleitung

Ruckus Wireless®

ZoneFlex®7762 Dual Band 802.11n

Outdoor Access Point

Getting Started Guide

Part Number 800-70216-001 (Revision C)

Published November 2009

www.ruckuswireless.com

1About This Getting Started Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Using ZoneDirector or FlexMaster to Manage the Access Point . . . . . . . . . . . . . . . . . . 1

2Unpacking the ZoneFlex Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Mounting Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Prepare the Required Hardware and Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Get to Know the Access Point Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Perform a Site Survey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Determine the Optimal Mounting Location and Orientation . . . . . . . . . . . . . . . . . . . . 10

Become Familiar with the Installation Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Decide How You Will Supply Power to the Access Point . . . . . . . . . . . . . . . . . . . . . . . 14

4Configuring the Access Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Configuring for Management by ZoneDirector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

What You Will Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Step 1: Connect the Cables to the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Step 2: Connect the Access Point to the Same Subnet as ZoneDirector . . . . . . . . . 19

Step 3: Disconnect the Access Point from the Power Source . . . . . . . . . . . . . . . . . . . 19

Configuring for Standalone Operation or for Management by FlexMaster . . . . . . . . 20

What You Will Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Step 1: Prepare the Administrative Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Step 2: Connect the Access Point to the Administrative Computer . . . . . . . . . . . . . 22

Step 3: Log Into the Access Point’s Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Step 4: Configure the Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Step 5: Disconnect the Access Point from the Administrative Computer . . . . . . . . . 33

Step 6: Restore the Administrative Computer’s Network Settings . . . . . . . . . . . . . . 33

5Verifying Access Point Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Connect the Access Point to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Contents

Check the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Associate a Wireless Client with the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Check the TR069 Status (FlexMaster Management Only) . . . . . . . . . . . . . . . . . . . . . . . 34

Disconnect the Access Point from the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

6Deploying the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Step 1: Connect and Seal the RJ-45 Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Step 2: Complete the Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Step 3: Connect the Access Point to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

7Attaching the Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

What You Will Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Step 1: Attach the Static Bracket to the Mounting Surface . . . . . . . . . . . . . . . . . . . . . 42

Attaching the Bracket to a Flat Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Attaching the Bracket to a Pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Step 2: Attach the Dynamic Bracket to the Access Point . . . . . . . . . . . . . . . . . . . . . . . 48

8Mounting the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

9(Optional) Mounting and Connecting the 5GHz External Antennas . . . . . . . . . . . . . . . . 51

10 Resetting the Access Point to Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 52

11 What to Do Next. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Change the Administrative Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Configure the Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Read Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

1About This Getting Started Guide

This Getting Started Guide provides information on how to set up the Ruckus Wireless

ZoneFlex 7762 802.11n Outdoor Access Point on your network. Topics covered in this guide

include installation, basic configuration, and device mounting.

This guide is intended for use by those responsible for installing and setting up network

equipment. Consequently, it assumes a basic working knowledge of local area networking,

wireless networking, and wireless devices.

Related Documentation

In addition to this guide, each Ruckus Wireless ZoneFlex 7762 802.11n Outdoor Access

Point documentation set includes the following:

■User Guide: Provides detailed information on how to configure the Access Point. The

User Guide is available for download on the Ruckus Wireless Support Web site at:

http://support.ruckuswireless.com/documents

■Release Notes: Provides late-breaking information about the current software release,

including new features, enhancements, and known issues. If the information in the

Release Notes differs from the information in this guide, follow the instructions in the

Release Notes.

■Online Help: Accessible from the Access Point’s Web interface, the Online Help

provides information that helps you configure the device from the Web interface.

Using ZoneDirector or FlexMaster to Manage the

Access Point

If you are planning to use either Ruckus Wireless FlexMaster or Ruckus Wireless ZoneDi-

rector to manage the Access Point, this guide describes the required steps that will enable

the Access Point to report to and communicate with FlexMaster or ZoneDirector success-

fully.

■To set up the Access Point for management by FlexMaster, refer to “(Optional) Set the

FlexMaster Server Address” on page 30.

■To set up the Access Point for management by ZoneDirector, refer to “Configuring for

Management by ZoneDirector” on page 14.

Unpacking the ZoneFlex Access Point

Package Contents

2Unpacking the ZoneFlex Access Point

1. Open the Access Point package, and then carefully remove the contents.

2. Return all packing materials to the shipping box, and put the box away in a dry location.

3. Verify that all items listed in Package Contents below are included in the package.

Check each item for damage. If any item is damaged or missing, notify your authorized

Ruckus Wireless sales representative.

Package Contents

A complete Access Point package contains all of the items listed below:

■ZoneFlex 7762 Outdoor Access Point

■Small plastic bag containing the Ruckus Wireless PoE injector for ZoneFlex 7762 AP

■Box containing the power adapter for the PoE injector

■Box containing the mounting kit (see “Mounting Kit Contents” for details)

■Small plastic bag containing the DC connector pins and DC cord connector assembly

(see Figure 1)

■Two small plastic bags each containing RJ-45 waterproofing assembly (see Figure 2)

■Small plastic bag containing an electrical shunt (for resetting the Access Point to factory

default settings, see Figure 3)

■Ground screw

■Service Level Agreement / Limited Warranty Statement

■Regulatory Statement

■This Getting Started Guide

WARNING: The Ruckus Wireless PoE injector and power adapter (if supplied with your

Access Point) are for indoor use only. Never mount the PoE injector and power adapter

outdoor with the Access Point.

Unpacking the ZoneFlex Access Point

Package Contents

Figure 1. DC connector pins and DC cord connector assembly

Figure 2. RJ-45 waterproofing assembly

Boot DC cord connector Coupling ring Connector pins (4 pieces)

Cable clamp housing

RJ-45 connector (on

AP)

Clamping ring

assembly

Rubber O-ring Sealing nut

Unpacking the ZoneFlex Access Point

Package Contents

Figure 3. Electrical shunt for resetting the Access Point to factory default settings

Mounting Kit Contents

■Dynamic bracket

■Static bracket

■Steel clamp (2 pieces)

■Machine screws (8 pieces)

■Hex bolts (4 pieces)

■Flat washers (4 pieces)

■Split lock washers (4 pieces)

■Wall anchors (4 pieces)

Figure 4. Mounting kit contents

Dynamic bracket Static bracket Steel clamp (2 pieces) Machine screw (8 pieces)

Hex bolt (4 pieces) Flat washer (4

pieces)

Split lock washer (4

pieces)

Wall anchor with metal

cone and hex nut

(4 pieces)

Before You Begin

Prepare the Required Hardware and Tools

3Before You Begin

Before installing and setting up the Access Point, Ruckus Wireless recommends that you

first complete the following pre-installation tasks.

Prepare the Required Hardware and Tools

You must supply the following tools and equipment:

■A notebook computer running on Windows XP/2000 and installed with one wireless

802.11b/g/n network card and one Ethernet card

■A pair of long nose pliers

■6mm flathead screwdriver

■6mm Phillips screwdriver

■10mm ratchet wrench

■Electric drill with 8mm drill bit (if mounting on a flat surface)

NOTE: At the beginning of each procedure, this guide lists the specific tools, accessories,

and equipment that you will need to complete the procedure.

Before You Begin

Get to Know the Access Point Features

Figure 5 and Figure 6 identify the Access Point features that are relevant to the installation

and mounting instructions that this guide provides. Before you begin the installation

process, Ruckus Wireless recommends that you become familiar with these features.

Figure 5. Access Point parts

Power LED Status LED

5GHz External

Antenna

Connectors

RJ-45/PoE

Connectors

DC Connector

Ground Screw

Andere Handbücher für ZoneFlex 7762

Inhaltsverzeichnis

Andere Ruckus Wireless Drahtloser Zugangspunkt Handbücher

Ruckus Wireless

Ruckus Wireless Unleashed H320 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7351-U 802.11n Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless SC8800-S Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZONEFLEX R310 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7762 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex R710 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T310d Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex R500 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless C110 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 901-T504-US31 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T750 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7343 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7441 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7321-U Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7341 802.11n Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T811-CM Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T610 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZF7762-AC Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7761-CM Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7762-S Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless H510 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless VF2811 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless Q910 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless MediaFlex 2900 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung