Ruijie Reyee RG-ES206GS-P Series Installations- und Betriebsanleitung

RG-ES206GS-P Series Switches

Hardware Installation and Reference Guide

Document Version: V1.0

Date: 2023.09.11

All rights are reserved in this document and this statement.

Without the prior written consent of Ruijie Networks, any organization or individual shall not reproduce, extract,

back up, modify, or propagate the content of this document in any manner or in any form, or translate it into

other languages or use some or all parts of the document for commercial purposes.

,, and other Ruijie networks logos are trademarks of Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their respective

owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms, and some or

all of the products, services, or features described in this document may not be available for you to purchase or

use. Except for the agreement in the contract, Ruijie Networks makes no explicit or implicit statements or

warranties with respect to the content of this document.

The content of this document will be updated from time to time due to product version upgrades or other

reasons, Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.

This manual is designed merely as a user guide. Ruijie Networks has tried its best to ensure the accuracy and

reliability of the content when compiling this manual, but it does not guarantee that the content of the manual is

completely free of errors or omissions, and all the information in this manual does not constitute any explicit or

implicit warranties.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

The official website of Ruijie Reyee: https://www.ruijienetworks.com/products/reyee

Technical Support Website: https://www.ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: [email protected]

Conventions

1. Signs

This document also uses signs to indicate some important points during the operation. The meanings of these

signs are as follows:

Caution

An alert that calls attention to safety instruction that if not understood or followed can result in personal injury.

Warning

An alert that calls attention to important rules and information that if not understood or followed can result in

data loss or equipment damage.

Note

An alert that calls attention to essential information that if not understood or followed can result in function

failure or performance degradation.

Instruction

An alert that contains additional or supplementary information that if not understood or followed will not lead to

serious consequences.

Specification

An alert that contains a description of product or version support.

2. Note

This manual provides installation steps, troubleshooting, technical specifications, and usage guidelines for

cables and connectors. It is intended for users who want to understand the above and have extensive

experience in network deployment and management, and assume that users are familiar with related terms and

concepts.

RG-ES206GS-P Series Switches Hardware Installation and Reference Guide Product Overview

1 Product Overview

The RG-ES200 series switches include the following 10 models:

Model

10/100Base-T Ports with

Auto-Negotiation

10/100/1000Base-T

Ports with

Auto-Negotiation

1000Base-

X SFP Port

Consol

e Port

RG-ES205C-P

5 (Ports 1-4 support

PoE/PoE+)

RG-ES205GC-

5 (Ports 1-4 support

PoE/PoE+)

RG-ES209C-P

8 (Ports 1-8 support

PoE/PoE+)

RG-ES209GC-

9 (Ports 1-8 support

PoE/PoE+)

RG-ES218GC-

16 (Support PoE/PoE+)

RG-ES226GC-

24 (Support PoE/PoE+)

RG-ES224GC

RG-ES216GC

RG-ES205GC

RG-ES208GC

RG-ES206GC-

6 (Ports 1-4 support

PoE/PoE+)

RG-ES210GC-

10 (Ports 1-8 support

PoE/PoE+)

RG-ES206GS-

6 (Ports 1-4 support

PoE/PoE+)

6F Port

supports

SFP

RG-ES210GS-

10 (Ports 1-8 support

PoE/PoE+)

10F Port

supports

SFP

Note

●A SFP port is not downward compatible with 100Base-FX.

RG-ES206GS-P Series Switches Hardware Installation and Reference Guide Product Overview

●1000Base-T ports are downward compatible with 100Base-TX and 10Base-T ports.

1.1 Package Contents

Table 1-1 RG-ES206GS-P Package Contents

Item

Quantity

Switch

Power adapter

User Manual

Power cord

Warranty card

Note

The package contents above are intended to provide a general overview, and are subject to the terms of the

order contract. Please check your goods carefully against the package contents or order contract. If you have

any questions, please contact the distributor.

1.2 Technical Specifications

Table 1-2 Technical Specifications

Model

RG-ES206GS-P

Port

Ports 1-6 are 10/100/1000Base-T ports with auto-negotiation, in which ports 1-4

supporting PoE/PoE+, while ports 5 and 6 do not support PoE/PoE+. Port 6 and

port 6F form a combo port.

Power Supply

AC input:

Rated voltage range: 100 VAC to 240 V AC

Max. voltage range: 90 VAC to 264 V AC

Frequency: 50 Hz to 60 Hz

Rated current: 1.5 A

Power cord: 3-pin 10A power cord

DC output:

Rated voltage range: 54 V DC

Rated current: 1.11 A

Power adapter connector: outer diameter: 5.5 mm, inner diameter: 2.1 mm, depth:

10 mm

RG-ES206GS-P Series Switches Hardware Installation and Reference Guide Product Overview

EEE

Not supported

PoE

PoE standards: IEEE802.3af and 802.3at.

Ports 1-4 are PoE/PoE+ ports, each supporting a maximum PoE+ output of 30 W.

Ports 5 and 6 do not support PoE standard.

Overall max. PoE/PoE+ power output: 54 W

PoE Power Cable

Pairs

Mode A (1-2, 3-6 pairs)

Max. Power

Consumption

Power consumption (No PoE load) < 6W

Power consumption (PoE full load) < 60W

Port Status LED

Toggle Switch

LED switch toggled to left (Mode 1): the port LED status indicates the status of

traffic transmission. Solid green means that the port is link up, while blinking green

means that the port is transmitting and receiving data.

LED switch toggled to right (Mode 2): The port LED status indicates the PoE

status. Solid green means that the port is supplying power, while blinking green

means that the port is in power overload state.

Reset Button

Press the button for less than 2 seconds and release, the switch restarts.

Press the button for more than 5 seconds and release after the system LED starts

blinking, the switch restores to factory defaults and restarts.

Operating

Temperature

0ºC to 40ºC

Storage

Temperature

–40°C to +70°C

Operating

Humidity

10% to 90% RH (non-condensing)

Storage Humidity

5% to 95% RH (non-condensing)

Fan

Fanless design

Temperature Alarm

Not supported

DDM

Not supported

Safety Standard

CE Certification

Max. Ground

Leakage Current

≤1.5 mA

Dimensions (W x D

x H)

149 mm (5.87 in.) x 79 mm (3.11 in.) x 26 mm (1.02 in.)

Weight

1.1 kg (12.79 lbs, package included)

RG-ES206GS-P Series Switches Hardware Installation and Reference Guide Product Overview

Caution

Operation of this equipment in a residential environment could cause radio interference.

1.3 Product Appearance

The RG-ES206GS-P switch provides 8 ×10/100/1000Base-T ports on the front panel, and a DC power input

port for 54V PoE injector on the back panel.

Figure 1-1 Appearance of RG-ES206GS-P

Front Panel

Figure 1-2 Front Panel of RG-ES206GS-P

Note

1. System status indicator of the switch

2. Electrical port status indicator

3. 10/100/1000Base-T port with

auto-negotiation

4. Electrical port status indicator

5. 10/100/1000Base-T port with

auto-negotiation

6. Optical port status indicator

7. Label (at the bottom)

Rear Panel

RG-ES206GS-P Series Switches Hardware Installation and Reference Guide Product Overview

Figure 1-3 Back Panel of RG-ES206GS-P

Note

1. Grounding stud

2. Reset button

3. LED mode switch

4. DC power input

5. Kensington lock

Note

●Reset button: Press for less than 2 seconds and release, the system restarts; press for more than 5

seconds until the system LE blinks, and then release, the system restores to factory settings and restarts.

●LED switch toggled to left (Mode 1): the port LED status indicates the status of traffic transmission. Solid

green means that the port is link up, while blinking green means that the port is transmitting and receiving

data.

●LED switch toggled to right (Mode 2): The port LED status indicates the PoE status. Solid green means

that the port is supplying power, while blinking green means that the port is in power overload state.

Cooling

RG-ES206GS-P adopts natural cooling. To ensure that the switch works properly in the specified environment,

a minimum clearance of 100 mm (3.94 in.) must be maintained around the device to ensure proper ventilation.

Dust the device every three months to avoid blocking the ventilation openings on the housing.

Figure 1-4 LED

LED

Panel

Identification

Status

Description

Status LED

SYS

Off

System is not powered on.

Blinking

green

If the power of PoE exceeds 54W, the

newly connected PD cannot be

powered up because of insufficient

power, but the switching function will

remain affected.

Solid

green

System is operating normally.

PoE status indicator of

1–4

Off

PoE is disabled.

RG-ES206GS-P Series Switches Hardware Installation and Reference Guide Product Overview

the RJ-45 port

Solid

green

PoE is enabled.

Blinking

green

PoE is abnormal.

RJ-45 Port Link/Ack

Status LED

1–6

Off

No link is detected for this port.

Solid

green

The port operates 10/100/1000 Mbps.

Blinking

green

The port is sending and receiving traffic

at 10/100/1000 Mbps.

SFP port LED

Appearance of

the 6F

Off

No link is detected for this port.

Solid

green

The port operates at1000 Mbps.

Blinking

green

The port is sending and receiving traffic

at 1000 Mbps.

RG-ES206GS-P Series Switches Hardware Installation and Reference Guide Preparing for Installation

2 Preparing for Installation

2.1 Safety Precautions

Caution

●To avoid personal injury and device damage, carefully read the safety precautions before you install the

device.

●The following safety precautions may not cover all possible dangers.

2.1.1 Installation Safety

Keep the chassis clean, free from any dust.

Do not place the device in walking areas.

During the installation and maintenance, do not wear loose clothes, ornaments, or any other things that may

be hooked by the device.

Cut off all the power supplies and unplug all power cords before placing the device in a rack or removing the

device from a rack.

2.1.2 Handling Safety

Avoid handling the device frequently.

Keep balance and prevent personal injuries when handling the device.

Cut off all the power supplies and unplug all power cords before moving or handling the switch.

2.1.3 Electric Safety

Observe local regulations and specifications during electric operations. Only personnel with relevant

qualifications can perform such operations.

Before installing the device, check whether there are hidden risks in the operating environment of the device.

For example, check whether the power socket is grounded and whether the ground is wet.

Be sure to know the location of the indoor emergency power supply switch before installing the device.

When an accident occurs, immediately cut off all power supplies.

Do not maintain the device by yourself when the device is powered on.

Make sure that the switch is powered off when you cut off the power supply.

Do not place the switch in a wet position, and keep the switch away from liquid.

Caution

●Improper or incorrect electric operations may cause a fire, electric shock, and other accidents, and lead to

severe and fatal personal injury and device damage.

●Direct contact or indirect contact through wet objects with high voltage or mains power supply may be fatal.

●If the power supply system is equipped with a leakage protector (also referred to as leakage current switch

or leakage current breaker), the rated leakage action current of each leakage protector must be greater

than twice the theoretical maximum leakage current of all the power supplies in the system. For example,

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie Reyee RG-NBS5100-24GT4SFP-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2600E Series Bedienungsanleitung

Ruijie

Ruijie RG-EG210G-P Bedienungsanleitung

Ruijie

Ruijie RG-S6920-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2915-L Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-24DC8QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS85 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-32CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6110 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6920-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-IS2712G Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES200 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S7800C Series Installations- und Betriebsanleitung

Ruijie

Ruijie S8600E Series Betriebsanleitung

Ruijie

Ruijie S8600E Series Handbuch

Ruijie

Ruijie HS2310-16GH2GT1XS Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-IF2920U-12GT1XS-DC Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S3760E Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-ES106D-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6100 Series Anleitung zur Verwendung

Ruijie

Ruijie RG-S6150-X Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NIS3100 Series Installations- und Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung