Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Ruijie RG-S6580-48CQ8QC Switch

Hardware Installation and Reference Guide

DocumentVersion:V1.03

Date: 2022.11.17

All rights arereservedin this documentandthis statement.

Any reproduction,excerption,backup,modification,transmission,translationorcommercialuse ofthis document

orany portionofthis document,inanyform orby anymeans,withoutthepriorwrittenconsentofRuijieNetworks

is prohibited.

Trademark and are ownedby RuijieNetworks.

All othertrademarks orregistered trademarksmentioned in thisdocumentareowned bytheirrespective owners.

Disclaimer

The products,services,orfeatures you purchasearesubjecttocommercialcontracts andterms. Someorallof

the products,services or features describedinthis documentmaynot be within the scopeof your purchaseor

use.Unless otherwise agreedinthe contract,RuijieNetworks does notmakeanyexpress or impliedstatement

or guaranteefor the content of this document.

Due to product version upgrades or other reasons,the content of this document will be updated from time to

time.RuijieNetworks reserves therightto modifythe content of the documentwithoutanynotice or prompt.

This manualis for referenceonly. RuijieNetworks endeavors to ensure content accuracyand willnot shoulder

any responsibilityfor lossesanddamagescausedduetocontent omissions,inaccuracies orerrors.

Preface

IntendedAudience

This documentis intendedfor:

Networkengineers

Technicalsupportandservicingengineers

Networkadministrators

Technical Support

RuijieNetworks Website:https://www.ruijienetworks.com/

TechnicalSupportWebsite:https://ruijienetworks.com/support

CasePortal:https://caseportal.ruijienetworks.com

Community:https://community.ruijienetworks.com

TechnicalSupportEmail:service_rj@ruijienetworks.com

Live Chat: https://www.ruijienetworks.com/rita

Conventions

1. Conversions

Convention

Description

Bold font

Commands,commandoptions,andkeywords arein bold font.

Italicfont

Arguments for which you supplyvalues arein italicfont.

[ ]

Elements insquarebrackets areoptional.

{ x | y | z }

Alternative keywords are groupedinbraces andseparatedby

vertical bars.

[ x | y | z ]

Optionalalternative keywords are groupedin brackets and

separatedbyvertical bars.

&<1-n>

The argumentbeforethesign(&) can be inputfor consecutive 1- n

times.

Doubleslashesatthe beginningofa lineofcode indicate a

commentline.

2. Signs

The signs usedinthis documentaredescribedas follows:

Warning

An alert that calls attentionto importantrules and information thatif not understoodorfollowedcan resultin

data loss orequipmentdamage.

Caution

An alert that calls attentionto essentialinformation thatifnot understood orfollowed can resultin function

failureor performancedegradation.

Note

An alert that contains additionalor supplementaryinformationthatifnot understood orfollowed will notlead to

serious consequences.

Specification

An alert that contains a description ofproductor version support.

3. Note

The manual offers configuration information (including model, port type and command line interface) for

indicative purposeonly.Incaseofany discrepancyorinconsistencybetweenthemanual andtheactual version,

the actualversion prevails.

Hardware Installation and Reference Guide ProductOverview

1 Product Overview

The RG-S6580-48CQ8QC switch is a next generation, data-center-oriented, high-densityprogrammable 100G access

switch independentlydevelopedby Ruijie Networks,providing100G/400Gaccess,low latency,and completedatacenter

features.With up to 48 100GE ports and eight400GE ports, the switchcan be usedwith the RG-S6980-64QC switch to

form a high-performanceandhigh-reliabilitydata centernetwork.

Table 1-1 RG-S6580-48CQ8QCSwitch

Model

400GE QSFP-

DD Port

100GE DSFP

Port

10GBase-T

Ethernet

Port

Extension

Module

Slot

Redundant

Fan

Redunda

nt Power

Supply

RG-S6580-48CQ8QC

N/A

5+1

1+1

A DSFP port supports the100Gmode onlyanddoes notsupportthe 1000Base-Xmode.

A QSFP-DD port supports the 400Gand100G modes.

1.1 RG-S6580-48CQ8QC

1.1.1 Specifications

Table 1-2 Specifications ofthe RG-S6580-48CQ8QCSwitch

Model

RG-S6580-48CQ8QC

CPU

Quad-core processor,2.9 GHz clock speed percore

Boot ROM

16 MB

Flash Memory

240GB

SDRAM

DDR48 GB SODIMM

Extension Module

Slot

Not supported

Extension Module

Type

Not supported

Fan Slot

6 (support5+1 redundancy, configure at least five fan modules inone switch)

Fan Module

M1HFAN II-F

PowerSupply Module

Slot

2 (support1+1 redundancy)

PowerModule

RG-PA1200I-F

Hardware Installation and Reference Guide ProductOverview

PowerSupply Input

Alternating Current(AC) input:

Rated voltage range: 200 V AC

to 240 VAC

Maximum voltage range: 90V

AC to 264 VAC

Frequency: 50 Hz to 60 Hz

Rated current: 8 A

HighVoltage Direct Current(HVDC) input:

Inputvoltage range:192 V DC to 288 V DC

Ratedcurrent: 6.5 A

PowerConsumption

Static powerconsumption:178 W

Dynamicpowerconsumption (Max.) : 742 W

Typical powerconsumption:633 W

SFP Module Type

See AppendixB

The supported module types maybe subject to change without prior notice. Contact

RuijieNetworks fordetails.

DSFP Port

Supported

QSFP-DD Port

Supported

FC Port

Not supported

10GBASE-T Port

Not supported

Temperature Alarm

Supporttemperaturealarm andover-temperatureprotection.

EMC Standards

GB/T 9254.1

SafetyStandards

GB 4943.1

Working Temperature

0°Cto 40°C(32°F to 104°F)

Storage Temperature

–40°C to 70°C (–40°F to 158°F)

Working Humidity

10%to 90%RH (non-condensing)

Weight

Net weight:11.5 kg (25.35 lbs) (with six fan modules and two powersupplymodules)

Dimensions

(W x D x H)

442mmx 700mmx 44 mm(17.40 in. x 27.56in. x 1.73in.), 1RU

The RG-S6580-48CQ8QC switch is a Class A product. In a domestic environment, this product may cause radio

interferenceinwhich casethe usermaybe requiredtotake adequatemeasures.

Powercords should beconnectedto a groundedoutputsocket.

The model of built-in lithium batteries of the RG-S6580-48CQ8QC switch is CR2032. The switch mayexplode if a

wrongbattery modelis used.Usedbatteries shouldbe properlydisposedof.

1.1.2 Product Appearance

The hardware of the S6580-48CQ8QC includes thechassis,the powersupplysystem and the heat dissipation system.

The power supplysystem: Provides two power supply module slots,which support 1+1 power supplyredundancy.

You are advised to configurepowersupplyredundancy.

The heat dissipationsystem:Provides sixfan module slots,whichsupport5+1 fan redundancy. You are advised to

configureallfans to realize redundancy.

Figure1-1 Appearanceof the RG-S6580-48CQ8QCSwitch

Hardware Installation and Reference Guide ProductOverview

Front Panel

Figure1-2 Front Panel of the S6580-48CQ8QCSwitch

Notes:

1. System Status LED

2. BMC LED

3. PowerSupplyStatus LED

4. Fan Status LED

5. LocatorLED

6. DSFP Port Status LED

7. DSFP Port

8. QSFP-DD Port Status LED

9. QSFP-DD Port

10. AssetTag

The RG-S6580-48CQ8QCswitch supports400GQSFP-DDmodules and 100GDSFPmodules.

Back Panel

Figure1-3 Back Panelof the S6580-48CQ8QCSwitch

Notes:

1. PowerSupplyModule Slot

2. Fan Module Slot

3. MGMT Port

4. USB 2.0 Port

5. Console Port

Asset Tag

The asset tag is on the left bottom corner of the switch front panel. It is a movable tag that can be withdrawn from the

device. You can mark the information such as the asset name, category, code and registration date on the tag to help

improveassetmanagementaccuracyandefficiency.

Figure1-4 AssetTag of the S6580-48CQ8QCSwitch

Hardware Installation and Reference Guide ProductOverview

1.1.3 External Ports

The RG-S6580-48CQ8QC provides the followingexternalports:

Universalserialbus (USB)port:This port canconnect to a USB flashdrive to save logs,hostversions,alarms,and

other diagnosticmessagesforyou to convenientlyupgradethe software versionof the switch online andsavethe

loginformation.

To protect the data and avoid device damage,use qualified USB flash drives from well-known vendors. The local

USB port is compatiblewith mostofthe USB controllers exceptsomeUSBflash drives.

The RG-S6580-48CQ8QC switch supports system debugging, configuration, maintenance, management and host

software uploading throughthe Console port.

Console port: A RS-232-compliantserial communicationportwith standard RJ45connector. This port is connected

to the serial port of terminal PC to perform system debugging, configuration, maintenance, management, and host

softwareuploading.

MGMT port:This is an out-bandEthernet port, whichuses standard RJ45connector.This interface is connected

with Ethernetport of a PC to perform program downloading.

DSFP port: Thereare 48 100GE DSFP ports,whichsupportSFP modules.

QSFP-DD port: There are eight400GE QSFP-DD ports,whichsupportSFP modules and 4x100G mode.

1.1.4 LEDs

Table 1-3 Description ofLEDs

LED

Panel

Identification

Status

Meaning

BMC LED

(Front panel)

BMC

(No BMC

hardwareis

embeddedin

the switch)

Off

The system is notpowered up.

Solidred

A serious BMC system failureoccurs.

Blinkinggreen.

The BMC is startingor upgrading.

Solidgreen

The BMC is operational.

Solidyellow

(reserved)

N/A

System status LED

SYS

Off

The system is notpowered up.

Hardware Installation and Reference Guide ProductOverview

LED

Panel

Identification

Status

Meaning

(Front panel)

Solidred

(1) One of the modules ofthesystem fails.

(2) The internalor partialtemperatureexceeds the

warningworkingtemperature.

(3) One powersupplymoduleis inposition butnot

be poweredup.

Blinkinggreen.

The system is initializing.

Solidgreen

The system is operational.

Solidyellow

One or morepowersupplymoduletypes donot

matchthe recommendedtypes.

Power supply status

LED (Front panel)

PWR

Off

The system is notpowered up.

Solidred

One or morepowersupplymodules have

communicationexceptions orotherfailure.

One powersupplymoduleis in positionbutnotbe

poweredup.

Solidyellow

One or morepowersupplymoduletypes donot

matchthe recommendedtypes.

Solidgreen

All powersupplymodulesareoperational.

Fan status LED(Front

panel)

FAN

Off

The system is notpowered up.

Solidred

One or morefan modulesarenotin positionor

faulty.

Solidyellow

Reserved(unused)

Solidgreen

All fan modulesareoperational.

LocatorLED (Front

panel)

Off

The LED is controlled byCPLDs by defaultandnot

usedfor positioning.

Solidblue

The LED is used foron-sitepositioning.O&M

personnelcan remotelyturn on or turn off the LED.

MGMT port status

LED

MGMT

Off

The port is not connected.

ACT LED: green

LINK LED: blinking

green

The port is connected at 1000 Mbps. The blinking

LINK LED indicates that the port is transmitting or

receiving data.

ACT LED: yellow

LINK LED: blinking

yellow

The port is connected at 10/100 Mbps. The blinking

LINK LED indicates that the port is transmitting or

receiving data.

DSFP port status LED

1F-48F

Off

The port is not connected.

Solidgreen

The port is connected at 100 Gbps.

Blinkinggreen

Theport is transmittingorreceiving data at100 Gbps.

QSFP-DD port status

LED

49F-56F

Off

The port is not connected.

Solidgreen

The port is connected at 400/100Gbps.

Blinkinggreen

The port is transmitting or receiving data at 400/100

Gbps.

Hardware Installation and Reference Guide ProductOverview

1.1.5 PowerSupply

The RG-S6510-48CQ8QC switchis powered bythe RG-PA1200I-F powersupplymodule.This smartpowersupply

moduleis hot-swappableand supports powermanagement,and thehostcan readinput power,inputcurrent, and

temperatureinrealtime.

The RG-S6580-48CQ8QC switch supports 1+1 power supplyredundancy. To improve the stabilityand reliabilityof

the entiresystem,itis recommended toconfigure1+1 powersupplyredundancy.Whenthe twopowersupplymodules

work normally,the switchis inthe status of current sharing.

The switch requires at leastone power supplymodule to work normally. Filler panels need to be installed in the

unoccupiedpowersupplymoduleslots toensure ventilation,heatdissipationand dustprevention.

1.1.6 Heat Dissipation

The workingtemperatureofthe RG-S6580-48CQ8QCswitchis 0°Cto 40°C,or 32°F to 104°F. Heat dissipationdesign

needs toensure thestability, safety, and maintainabilityinsuch environment.The RG-S6580-48CQ8QC switch adopts

fan ventilationand forcedconvection to ensurethe device canwork normallyinspecified environment. Dustthe device

every threemonths toavoid blockingthe ventilationopenings.

The RG-S6580-48CQ8QCsupports M1HFANII-F andprovides fan speedregulation,fanfailurewarning,and fan hot

swapping.

Figure1-5 Exhaust Ventilation and Convectionin the Heat Dissipation Design ofthe RG-S6580-48CQ8QCSwitch

Maintain a minimum clearanceof20cm (7.87in.) around the switch for ventilation.

The switch requires at least five fan modules to work normally. Filler panels need to be installed in the unoccupied

fan moduleslots toensure ventilation,heatdissipationand dustprevention.

Do not use powersupplymodulesandfanmodules withdifferentairflow directions together.

1.2 Modules

1.2.1 M1HFAN II-F

As the fan module ofthe RG-S6580-48CQ8QC switch, the M1HFAN II-F module provides a cooling mechanism for the

wholesystem.The M1HFAN II-F module supports fanspeedcontrol,failurewarning,andhotswapping.

Andere Handbücher für RG-S6580-48CQ8QC

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie RG-S6580-24DC8QC Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1920 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS83 Series Bedienungsanleitung

Ruijie

Ruijie RG-ES100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S7800C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS86 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-IF2920U-12GT1XS Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6250-48XS8CQ Series Handbuch

Ruijie

Ruijie RG-S6510-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2924GT/8SFP-XS-P Bedienungsanleitung

Ruijie

Ruijie RG-S5300-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NIS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6150-X Series Anleitung zur Verwendung

Ruijie

Ruijie RG-S6510-48VS8CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6000C-48GT4XS-E Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NIS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1960-24GT4SFP-UP-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-N18000-XH Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS6002 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES05 Series Bedienungsanleitung

Ruijie

Ruijie RG-S6930-2C Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6920-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2915-L Series Installations- und Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung